That brings the CS4 along during the upgrade of computers

Similar Questions

• Network down frequently on a virtual machine after the upgrade of computers host and vmware to win 10

  Dear all,

  A week ago, I upgraded both my two machines VMWare Win 7 to win 10, as well as the host operating system. also from 7 to 10.

  Now once every 1 or 2 days, one or both the two vmwares aura an esclamation mark on the network status icon in the lower right corner and West no connection.

  The host operating system is NOT having any problems with the network.

  The solution is to disable and reactive the adapter to virtual machines, or repair of running Network Diagnostics where she'll tell me that it s has reinstated the connection to the bridge. But obviously I´d prefer the VM´s to be on the internet 24/7 without my intervention.

  I have another computer on the same router on which I did the same thing, but with this I m not having these problems. A different and not connected equipment via the VPN running on the host OS, which is the case with the machine that s had questions.

  But even once, the host operating system is not having issues, the two VM´s aren´t always the two to have this problem, and this never happened when he was all Win 7.

  I ve disabled some nights windows defender analysis and TCP/IP V6, but neither helped.

  Want to see some of the information from the last network diagnostics / repair or some log file, or you already know what would be the solution to my problem?

  Thanks in advance!

  Best regards

  Jazzl

  Well, I thought that a vm was having this problem a lot more often than the other, so I looked for error messages in windows journal, showing that the network problem - have to with DHCP btw - always spent 2 minutes after an event regarding slui.exe, not found on the other machine.

  What I also noticed was that the problematic vm had lost its activation of windows with the upgrade to win 10 (win 10 has limits to how much the same license can be run as virtual machines), is is not the case for the more successful one.

  Then I copied the good machine, which contains the same as the other, changed mac and uuid and now it s showing that enabled, no problem so far.

• I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if that brings the circle/round view form, but does not work.  All the I

  I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if it carries the form circle/round in sight, but it does not work.  All I get is a focus.  Can anyone help with this please.  Thank you.

  Remove the caps lock

• Can I keep CS3 during the upgrade to CS4?

  I intend to upgrade to CS4 (design premium) very soon, but want to keep the CS3. A representative from Adobe told me that when the upgrade to CS4, installation is written above CS3. Is this correct? I thought there was a way to keep the CS3 during the upgrade to CS4. If so, is this a special option which must be selected in the insatll? Reason being, I have a couple of clients who want jobs delivered in native format - some works in CS3 (InDesign) and one who works in CS2 (w/files in the InDesign Interchange format). Thanks for your help.

  By default, it installs in places that won't disturb your CS3 components.

  -Dov

• The upgrade of parts on e9220y

  I'm looking to upgrade some parts on my HP Desktop stock. Initially, I wanted a nice desktop, but I have been doing in addition to game and want to update some parts myself. I don't know a lot about the upgrade of computers so I ask the help of some experts who know it. I would like some recommendations on parts for a good price. I need not be high-end, just enough to play modern games well (medium-high settings) here is what I find on my desk.

  System model: NY553AA-ABA e9220y

  Processor: AMD Phenom II X 4 910 processor (4 CPUs), ~2.6GHz
  Memory: RAM 8192MB

  Name of the graphics card: ATI Radeon HD 4350

  Motherboard

  WD, welcome to the forum.

  I have reviewed the specifications of your computer and think that the only necessary to increase performance of the system upgrade is a better card discrete video.  However, this would require a power supply unit (PSU) upgrade.

  I like Corsair and OCZ PSU.  Here's two that might work:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139028

  http://www.Newegg.com/product/product.aspx?item=N82E16817341017&cm_sp=Cat_Power_Supplies-_-Spotlight-_-17-341-017

  I like the graphics cards XFX, EVGA, Sapphire and PNY in that order. Here's one that should fit in the space provided and give you good performance:

  http://www.Newegg.com/product/product.aspx?item=N82E16814150561

  If your problem is solved, please click "accept as a Solution.

• Something (update may have failed) preventing the upgrade to 8.1

  Hi all. Looking for help with my problem!

  I have an ASUS PC with Windows 8.

  I have been automatically updated to 8.1 when it came out, but problems with her has made my laptop unusable so I handed over to 8 and weeded the updates that force the upgrade to 8.1 and prevented.

  I like go to 10, but to upgrade to 8.1 firstly, apparently.

  To do this, I was informed by the 8.1 download page to install a few missing updates. I went to the updates and everything except a properly installed update.

  The update that didn't settle was KB2920189. I searched for help and found that a lot of people had this problem, but all seemed to speak to install on servers etc. (also sounded as if it was an update from 2014, so I don't know why he didn't score himself before, I regularly check updates.) The advice given causing a dangerous boot or something and advised to not to do this unless you know what you're doing. I did not, so I didn't feel uncomfortable following this Council!

  The only thing I could think was to hide the update, I did. Download 8.1, then worked, but the installation failed. I guess it's because of the update failed, but I'm not 100% sure.

  Can someone help me understand what is happening? All I want to do is get to 10 Windows!

  With many thanks in advance :)

  Please provide a copy of your system information file. To access your information file system select the hotkey Win + R, type msinfo32 and click OK . Place the cursor on the System summary. Select file, Export and give the file a name noting where it is located. Click Save. Do not place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your newspaper System and Application (two files) of your event viewer on your disc one and post a link here. You can delete the earlier copy of your OneDrive records.

  To access the system, log, select the hotkey Win + R, type eventvwr.msc and press the key. In the list on the left side of the window, select system and Windows logs. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• The upgrade of VmWare Workstation 5.5 to 8

  I have an installation of Workstation 5.5, which has been used for a while.  It contains several virtual machines, some with more than a dozen shots.  It has worked well for me.  I'm currently upgrading my computer and I would like to upgrade to Workstation 8.0, but upgrade to experience, I know that I will have problems with the upgrade virtual computers that are instant.  Is it possible to upgrade the virtual machine without having to delete all snapshots and return the VM?

  Hello

  I think that you can run the virtual machine as they are - if this isn't against all my expectations, I fix any problems ;-)

• UTL_FILE.fcopy does not work as expected after the upgrade to 10g

  Hi all, I have an Oracle database running in HP - UX 11.31. The database version is 10.2.0.5.0 and it is patched with PSUOct2011_12827745. This database has been actually upgraded to version 10.2.0.4 (no group of hotfixes) on 13 - Dec last year.
  
  There is a procedure in the database that reads the contents of a directory, and if there are files in this directory, the contents of the file will be read and inserted in the database. After that, the procedure will move the file to another location for archiving purpose. I will summarize below on the procedure:
  Source directory: /home/.../DB_Upload
  Source Dir name: SRC_DIR
  Destination directory: /home/.../DB_Upload/Archive
  Name of destination Dir: DEST_DIR
  
  Before upgrading the database, the procedure works very well. Since I upgraded to 10.2.0.5 + PSUOCt2011, the procedure still works as expected, but the file in the destination folder becomes 0 bytes, although initially the file from the source directory is nonzero bytes. The procedure contains the following lines which makes the move from the source to the destination file:
  UTL_FILE.fcopy ('SRC_DIR', 'file', 'DEST_DIR', 'file');
  UTL_FILE.fremove ('SRC_DIR', 'file');
  I tried running only the function fcopy by running the query below and I get the same result:
  exec utl_file.fcopy ('SRC_DIR', 'file', 'DEST_DIR', 'file');
  The weird part is that the procedure completed successfully, and no error message only appears. Even alert logs don't show any errors in this procedure.
  
  After searching for a solution, I found another method called utl_file.frename (...), which can also be used to move the file, so I decided to try it. Here's what I came up with to test:
  exec utl_file.frename ('SRC_DIR', 'file', 'DEST_DIR', 'file');
  Surprisingly, the file is moved to the destination successfully, and the size remains the same from the source (size of 0 bytes is more). Therefore, I changed the procedure to use only the frename() function, and the procedure now works successfully, with files of size zero is not in the destination.
  
  Is this a bug in the new version of Oracle? This never happens in 10.2.0.4 before the upgrade, and I am very surprised that after the upgrade, this problem appears. Oracle experts, please explain this. Thank you.

  Is a known bug (reported bug 12412502, bug 12345982 and Bug 9926478) to 10.2.0.5 patch group which appears only on the HP - UX Itanium platform...

  There is a work around, copied the text of Bug 9926478:

  WORKAROUND SOLUTION?
  ===========
  Yes

  WORKAROUND INFORMATION
  ======================
  Utl_file.fcopy of execution in a PL/SQL procedure.
  Workaround is acceptable for the customer.

  From My Oracle Support Note ID 1324406.1:

  Patch 12345982 (FILE CREATED FROM UTL_FILE VACUUM. FCOPY on HP - UX ITANIUM 10.2.0.5) is currently available.

  And in the same note, there is a work around using UTL_FILE. GET_RAW and UTL_FILE. PUT_RAW

  But, I think, you already found a better workaround for the cases of displacement... so you can use your workaround or apply the Patch 12345982

  Best regards
  Alfonso Vicente
  [http://www.logos.com.uy/el_blog_de_alfonso]

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  Found the answer:

  Java for OS X 2014-001 includes improvements to the installation and replaces all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.

  installed above and it works now

  Blessings

• Add fron host so that the upgrade to ESXi 5.0 and 5.5

  Our ESXi environment consists of four hosts with VCenter server with a network SAN EMC e.  It's all about 5.0 but, I am about to upgrade to 5.5 and add an additional host at the same time.  Here are my questions.

  1. can I save the config on an existing host and change (hostname, IP, etc.) to import to the new host?  I've not seen a way to edit the configuration file once I have to export it as a backup.  The only way that I can get is to browse the data store, take the txt config file and import that once the new host is turned on.  I make a mountain out of a hill of mole too think this?

  2 shooting. me in the foot if I bring the new host online 5.5 along side the existing hosts to 5.0?  The reason for this is because resources are tight on the four existing hosts and I can ' t vmotioin all the machines virtual it which means I have to close the servers...  If I can bring up the new host 5.5 that would allow me to put up-to-date without significant interruptions in service.

  Thanks for the comments.

  Tony

  1. According to the number of servers that you want to install, it can be easier and faster (and more supported) to just manually configure settings, unless you use Enterprise + licenses that provides profiles of the host.
  2. Basically, there should be no problem with the new hosts v5.5. However, do not forget that the fist you must update vCenter Server to v5.5 to add v5.5 hosts...

  André

• Can't get the upgrade to Illustrator CS4 to work with Freehand.

  There is no option for the upgrade of everything except CS, CS2, CS3. Adobe Announces Illustrator CS4 can be upgraded from Freehand MX, 10, 9, but fail to offer an option to enter a number on the fly during installation.

  Is there a solution to this Adobe screw-up?

  On Amazon.com, search for "Adobe Illustrator CS4 Upsell from Freehand drawing".

  I don't know what is the exchange of Amazon policy. Maybe they'll let change you for the 'Upsell' version

  The Adobe Store site that sells the download of the upgrade version requires clearly as the buyer to "choose a version.

  

  If I were you I contact Adobe Customer Service and see what your options are. Here is their return policy.

  http://go.adobe.com/kb/cs_tn_15327_en-us".

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Why firefox fails during the upgrade?

  I have been using FF for several years. Three or 4 times during the process to upgrade FF loses open tabs and only load with a single tab (it's all right I can reopen). So, I waited for the next version 'stable' and then tried again until this successful.

  I am running 19.0.2. The problem is that the upgrade creates two title bars (good name? At the top of the brower... which shows the title of the current page) and just generally looks like if effed-up top and icons are stripped, etc..

  I searched: can someone direct me to the help page which addresses this problem.

  Thank you!
  SP3 for Windows XP, 2 GB of Ram

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• What should I stop time machine during the upgrade at El Captian?

  Do I have to stop the machine in time during the upgrade to El captain?

  N °

  Make sure that your Mac meets the requirements > update of OS X El Capitan