The 177fw Mfp scanning

Similar Questions

• 225dw MFP: scanning with HP LaserJet MFP M225dw Pro

  How can I get the 222dw MFP scanning via direct USB connection on the printer.  He seems to want to work through the network. Printing works fine, but it won't scan.

  USB cable is fine, the printing, scanning simply do not.  Past 1/2 hour with HP technical support (it is hard to find, but once you do, they are useful), install the drivers somehow could not install the scan driver, did that, now the digitization of works.

  Thank you!

• 177fw HP MFP: MFP 177fw no scan button

  I think I already know the answer to this because messages on the forum for other State printers is not available, but just to confirm, is there no option to scan directly from MFP 177fw (which is the scan button)? I didn't notice any mention other than to scan from PC documentation.

  Indeed, as your laser printers offer no sign before scanning.

  To analyze the use of scanning HP program on your PC.

  Shlomi

• Autofeed of the margins to scan to HP Laserjet 1536 dnf MFP

  Hello

  I have a HP LaserJet 1536 dnf MFP and have problems with the scanner of the automatic feeding system. Papers, I'm trying to make copies to make use of all the 8½ "x 11" "on paper and when they are copied are cut by about ¼" anywhere in the document. " Y at - it an option to make the paper to scan the whole 8½ "x 11" Manger? " Currently, my only solution is to reduce 88% printing, which produces a low police on the copies. Any help would be appreciated.

  Operating system: Windows 7 64-bit

  Thank you

  Invigilium

  I found the solution: buy something else.

• LaserJet M3035xs MFP Scan because of the network folder

  Hello. I had a question about the scan to network folder option on our M3035. At the same time, I had this put option in place and works very well with all our Windows 7 computers. The hard drive in the Copier has failed and had to be replaced that erased all our settings. I used the wizard to add folders to the copier to scan network and even though files test ok at installing any of my test scans are appearing in the record. I was getting an error in a first time on it is not unable to check access I went into the settings using the IP address and added my credentials in this way. After this step, I was able to scan, but nothing appears in the record. HP wants $1,000 to get out because we are no longer under warranty.  Any assistance that you can offer is greatly appreciated!

  Sharon

  Thank you for responding. My Info was valid and set up the same way it was before. I decided to take a different route and put all the files on the server through the server to scan and save. That seems to work for now.

• HP MFP M276nw: y at - it a driver of the HP MFP M276nw sierra

  Printer can be added through add printer process.  Print shops.  Not even a scan option!  Any ideas?  Thank you!

  Hi @LJA53,

  Thank you for joining the HP Forums!

  I noticed your post that you can not scan with your printer HP Laserjet MFP M276nw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

  According to the website Software and Driver Downloads , I see not all the drivers for this printer for Mac OS X 10.12 Sierra. Have you tried using Apple Image Capture for scanning or the HP Easy Scan software?

  If none of these work programmes, all we can do is wait for the software and drivers to be released, or plan to use Mac OS X 10.11 El Capitan until the software drivers come out.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• HP Color LaserJet M477fnw MFP: Scan to computer button disappeared

  Hello, I saw similar comments of the same issue, but none with a solution.  The closest is this: http://h30434.www3.hp.com/t5/LaserJet-Printing/How-to-fix-missing-quot-scan-to-computer-quot-touchsc...

  Problem: We have a new printer that we have Setup.  During the installation process, on the touch screen, provided the message to "Scan to Computer".  We used the option to make sure it worked and took part in the computer we wanted.  We restarted the printer, and the option is now missing!  The option "Scan to Computer" has completely disappeared.  Where it was once a touchscreen button / option, no longer exists.

  Printer: HP Color LaserJet M477fnw MFP

  OS: Mac OS X 10.8.xx

  I downloaded the firmware update, but that doesn't work either.  I tried using the verification of updates of the touch screen of the printer, it can never connect.  I connected to the internet, I connected directly on a hard line, still no connection.  I literally just bought this printer yesterday, with a 2-year service plan, drove an hour to the next closest store that had it in stock and it gives me nothing else problems.

  I have unplugged and waited a minute.

  I've uninstalled and reinstalled the printer and the software from my computer.

  I'm out of ideas.

  Hello @gfrd3489

  If you talked about scanning to the icon post from work or option after pressing the icon of the scan on the printer itself that one has been dropped by HP since she had so many questions with that like on some devices will only scan flat and not of ADF.

  If you notice you still have other options such as scanning to USB key, scan to e-mail or scan in network on the printer folder of are next to the HP scanning app on the PC for windows and mac

  Devices most recent are not supposed to have this option on the first place and the firmware and normal updates which will remove devices more alumni who have it

  There were a few M477 which were sold to vendors when it first came out which was which, but as soon as he gets the first update will be deleted

  hope that clarifies the question

• M277d MFP: Scan to PDF

  How can I scan directly to PDF? The fax windows scan utility only allows me to record on types of image files. I don't want to open a file converter to get a pdf doc?

  Hello @brain2900,

  Welcome to the Forums of HP's Support. I understand you want to be able to scan directly in PDF format. I would like to help.

  You mentioned that you use the Windows scanning and Fax. Have you tried to use the scanning HP and Capture app?

  It is available free through the Microsoft Store. HP scan and capture.

  Another option is to use the real software and drivers for your laserjet.

  HP customer support - Software and Driver Downloads: HP Color LaserJet Pro M277dw MFP

  Scan to PDF is normally by default when you scan documents with the software.

  I hope this helps. Don't forget to take a second, then click on Bravo as a way of saying thanks. If these options don't work for you let me know.

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP Color Laserjet Cm 6040 MFP: Hp Color Laserjet Cm 6040 MFP, scan driver?

  Hi, I have a HP Color Laserjet CM6040 MFP, and I want to know if this printer is a driver of scan.

  You shouldn't have a driver.  The unit has the ability to scan to a network or a local folder.  Here's a link for how to use.  To install you may need to download the user manual.

  http://h10032.www1.HP.com/CTG/manual/c01300478.PDF

• HP laserjet pro 200 color mfp: hp laserjet pro 200 color mfp scan show m276nw

  Hi I have a problem to use the scan software from my PC to scan the document and save it to my PC. Whenever an error message pop up: inaccessible Scanner.

  I use wireless and print without any problem, even I disable the firewall and connect with the printer cable, it still does not work. Please help me to solve the problem, I use the scan function a lot. Thanks in advance.

  Hi @RightOnMoney,

  Welcome to the Forums of HP Support!

  I see that you are having problems scanning with your HP LaserJet Pro 200 M276 MFP printer color. I'd be happy to help you with this.

  If you are able to print, but can't scan. It seems that the HP software is corrupted.

  Printing and scanning doctor may be able to correct the problem for us.

  • Please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
  • What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If printing and scanning doctor does not resolve the problem, please uninstall and reinstall the HP software.

  • Monofunctional and multifunction printers - HP printer software uninstall.
  • Important! Please use the printer Install Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. Download and run The Installation Wizard for printer () a free tool from HP. When you click this link, HP printer installation wizard is downloaded using the download of your Internet browser capabilities.
   

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• c4795 PSC fails to create the file to scan to computer

  I had the previous models of HP psc units and they worked and I am familiar with the process.

  I uninstalled and reinstalled (with the downloaded version) software.

  The scanner works, it shows a preview, but when click Finish (to send images on computer) the progress bar gets up and goes (fast track I think) and no file is created.

  This is the acutal post the link above, that solved the problem for me:

  05/11/2009 15:59

  Hello

  We have worked very hard on a work around for this problem.

  I want to thank the many scholars colleagues in various parts of the world to help create this solution.

  The problem is caused by a dll that is not upgraded during the Cue 13 install.

  The correct version of this dll can be found here - filename hpqxmlul.dll

  FTP://noscnfil:[email protected]/

  Save this file on your PC and then copy it to the correct location.

  For 32 bit

  C:\Program Files \Digital Imaging\bin

  For 64-bit

  C:\Program Files (x 86) \HP \Digital Imaging\bin

  After you have copied the file to the correct location and replaced one that was it restarts the PC and the problem of scanning should disappear

  Please respond correctly after you have your scan job

  Thank you

  JonW

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• HP Deskjet 2540: Enlarge/reduce the size of the document during scanning.

  Is it possible to enlarge/reduce size of document on the Deskjet 2540? My wife uses this function to its sewing patterns. If not able, could someone please recommend software?

  Thank you

  Tom

  Hello

  No function zoom, you 100% het (size) of the original when scan. No need to buy a software, you can use Windows Paint to increase/decrease the file scanned.

  

  Kind regards.