The double option of VCS Starterpack Interface!

Similar Questions

• When I double-click a folder or a drive, I get a "this file has no program associated with it for performing this action. Create an association in the Folder Options panel' message.

  I studied a lot of information to solve this problem, but whenever I click on my drives in my computer or folder, it comes up with this error message. No matter what I do, the error remains. The strange thing is,I can click right and always open folders normally with the "Open" option, it's just that Ican't double-click on a folder and access it using Windows Explorer. I think it might be a virus or something, but I'm not a computer expert. Anyone know how I can fix without wiping my computer?

  I tried the things:

  (1) I have SystemSuite Pro 10 (2009), so I used that to try to scan deep and does all the options I could. I found 4 Trojan files in my files of java for a reason, but I deleted them.

  (2) some sites suggest a problem with the registry, so I tried the fixes for those who did not.

  (3) I had a system checkpoint to restore old and just tried to restore my computer to that, but the problem persisted.

  (4) I used guest trying to access Windows Explorer and some of my other files, but the error message comes up again. It seems impossible to access Windows Explorer.

  Please help me. Although it is a small problem, I really like my new computer to stay in the best shape possible and not have to do a right-click on each folder just to open it.

  did you try on winhelponline (dot) com file association fixed for windows 7?

• I want back the desktop option to the metro widget user interface in Windows 8?

  Hello. I use version of Windows 8 dev, and the Office disappeared from my metro ui widget option. Now, I usually go to the glazing control > advanced click ot on the management of the Office to go to my office. How can I report the desktop option in the menu?

  The Windows Developer Preview is a pre-release version of the next operating system (possibly named windows 8) for developers and not intended for the general public; It of not even a beta so expect problems and problems of stability

  Please post your question in the forum below:

  Windows Developer Preview: OS General Questions
   http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral

  Kind regards

• How to activate the two IPS on VCS starter pack express

  I have the Starter of Cisco Express works with a single IP address using a NAT. This only works inside the LAN. To enable this machine on the internet, I bought the key option to double network interface. I enabled both interfaces, but I don't know how I should configure the two IPS by access from the internet. I tried to activate the static NAT, but it did not work.

  There is only a single default gateway and this is where most of the traffic will be released and which should point to the internet router.

  If you have addresses of internall more than 'LAN', you can simply add additional routes via the administration console.

  As if LAN is connected to LAN2 192.168.150.0/24 and you 192.168.175.0/24 your home and where your laptops

  router for tha is 192.168.150.1 you would add that, on the road to xcommand, add the command:

  xcommand RouteAdd
  *h 'xCommand RouteAdd'
  "Adds and configures a new IP route (also known as a static route)."
  Address(r): "Specifies an IP address used in conjunction with the prefix length to determine the network to which this route applies."
  PrefixLength(r): <1..128> "Specifies the number of bits of the IP address which must match when determining the network to which this route applies. Default: 32"
  Gateway(r): "Specifies the IP address of the gateway for this route."
  Interface: "Specifies the LAN interface to use for this route. Auto: the VCS will select the most appropriate interface to use. Default: Auto"
  

  for the example given, it would be (user admin via ssh):

  xcommand road add an address: 192.168.175.0 LG: gateway interface 24 192.168.150.1: LAN2

  But to be honest I'm not sure jabbervideo it works well with the highway espress in

  a lan environment double anyway.

  As with a vcs - c / e deployment you have the model of the internal and external with vcs

  different hosts where he tries to get funding and then depending on who gets the data

  for the record. It may be that in any case only get you external IP of the vcs-e.

  I would therefore simply deploy a DMZ where the outside and inside can reach the starterpack with

  the same address or even external ip using a NAT that is hosted in LAN1 put directly on a public ip address in a dmz...

  

• can I change the behavior for firefox menu to open instead of opening the 1st option lists?

  is it possible to adjust the way the orange menu firefox behaves when you click an option?
  currently hovering on an option opens the list below (for example, a list of bookmarks for favorite option, or a list of pages visited for the historical option) and clicking it opens the first item in the list.
  I would like to change this so that the list is opened when you click an option, since it is not possible to hover using a touch screen.
  It's quite annoying when the management of bookmarks screen opens if all I want to do is bookmark the current page (which is not possible in this form)

  The orange button Firefox will be gone in Firefox 28 or 29, in releasing the Australis of redesign of the User Interface.

  There are other ways to save a new bookmark. A double click on the star to the address bar does not work on a touchscreen device?

  https://support.Mozilla.org/en-us/KB/use-bookmarks-to-save-and-organize-websites

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• Option provisioning VCS key

  I got 13.2 TMS, VCS - C 7.1, VCS-E 7.1

  100 MSDS supply of licenses,

  VCS - C has the following license:

  0 calls no route, route 100 calls, 2500 records, encryption, interoperability, FindMe, Interfaces network double.

  VCS - E has the following license:

  40 calls no course, 10 calls from crossing, 2500 records, 1800 TURN Expressway, encryption, interoperability, FindMe, relay, Network Interfaces double

  In order to get video Movi/jabber to work, are these sufficient or do I have the device key on the VCS - C supply?

  I have implemented the TMS in legacy mode, agent and managed to sign up customers movi and make and receive calls from clients ipad and laptop. I have now migrated the TMS TMSPE and customers will not fit. Not sure if the license key is the reason why.

  Help, please...

  Hi Yusuf

  I sent you a private message.

  / Magnus

• Bring back the old options windows in Firefox

  Upgrading Lee 42.0 was removed for the difficulty I have applied (setting the "browser.preferences.inContent" preference) to continue to allow the Options appear in a window pop up, rather than in the flat browser window. It's really annoying and difficult to use, the context menu was much easier to use and have floating "above" the browser window.

  The "browser.preferences.inContent" preference setting is no longer seems to work. Please tell me if there is a way to solve this problem, because I am in and out of the options a fair bit and it really is a pain to use now.

  Thank you.

  Hi marcoporcellini, firefox doesn't bring back the old interface options - browser.preferences.inContent preference was just in place temporarily for a period of transition. now that there are new features and settings, go to preferences and was former windowed interface is more maintained, its users would have missed out on them, so the support fell completely in firefox 42.

  If you still miss the old style - the Restorer Classic theme https://addons.mozilla.org/firefox/addon/classicthemerestorer/ addon contains some improvements to make the more familiar the style options...

• "ok, cancel, help to" buttons missing on the page options. A change to v38.01?

  Hello and thank you I only have a button at the bottom of the page options, in categories like security or advanced etc. Once the three, ok, cancel and help. Now just one with a '? ' in this regard. Is it a simple change in v.38? Just hoping I don't have some malware change things around! Summer is here! Thanks again.

  Hi, don't worry! Options to open in a tab, and the changes are saved automatically. You can close it by clicking on the 'x' close tab that you would have another tab.

  If you really don't like it, you can return to the old window Options by: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.preferences.inContent and double-click on it to change the "value" from true to False, taking care to not to change what anyone else. You will then need to restart Firefox.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• How can I remove the double song from my iPhone titles?

  How can I remove the double song from my iPhone titles?

  Hello josephever,

  Thank you for using communities of Apple Support.

  To remove the music from your iPhone, you will need to follow the steps below:

  Remove music

  Remove tracks, albums or playlists in the music app delete all music in the settings.

  Remove the application, music, playlists, albums or songs

  1. Find the song, album, or playlist you want to delete.
  2. Tap the Options icon plus on the right side of the screen.
  3. Press DELETE.
     
  4. When you are prompted, press Delete [purchased or Playlist] to confirm.

  Delete all the music on your device

  1. Go to settings > general > storage and use iCloud > storage management.
  2. Tap music.
  3. Under the music, by sweeping left on all the songs.
     
  4. Press DELETE.

  If you delete a purchase that you have not saved on your device, the purchase will also hide your purchase history.

  If you are a member of music from Apple or iTunes subscription game, you might see 'Remove my music' instead of delete. Remove the music from your iPhone, iPad or iPod touch also removes it from your music library to iCloud. If you delete music on a single device, it also deletes other devices. Learn how delete your music to iCloud library media.

  On an iPhone, iPad or iPod touch, if you do not have the music available offline, it is cached by using the available space on the device. The device will delete cache and caching of music, as space is needed by the device.

  Remove music, movies, applications and other content to your iPhone, iPad or iPod touch

  See you soon.

• Can I remove the preview option? When I roll over the elements if the cursor move fast enough, I get the 'Preview '. I do not need or want. Thank you

  I would like to remove the 'Sample' option When I leave the cursor over an item for a period of time the 'Preview' screen comes up. It's annoying, and I don't need or want.

  type in the address bar Subject: config

  then press i ' l be sure to what I promise

  then type in the bar of browser.allTabs.previews

  then double-click on it to make it fake

  Do the same with: browser.ctrlTab.previews

  exit firefox and restart it.

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Add the new application to the Application Options Panel

  I want to be able to have Firefox open the .vcs files I get in Outlook, as IE does. It looks like I could use the tools-> Options, Application panel, but I must add that mime type. I read that changing the mimetypes on the server can work, but I have several servers to work who send these files. I can see to edit the file, but I need text/x-vCalendar and no text/calendar type.

  The extension of MIME Edit for Firefox 3.0 - 3.7 versions is available here:
  http://space.geocities.Yahoo.co.jp/GL/Alice0775/view/20080912/1221150790
  The developer who has updated the extension is from Japan, and this Web site will be completely readable if you have not installed the correct language package.

  You can download it directly from this link and save it to a local disk.
  http://space.geocities.jp/Alice0775/store/mime_edit-0.601004242000.xpi

  Then use file > open file... to install this extension.

• Strange behavior of startup and cannot access the tools-> options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.