The host che riportano uso di e CPU RAM erroneamente a zero...

Similar Questions

• The host VMware workstation and multi-core CPU

  Apologies if this has already been answered, but all my research to turn questions about processors how can specify in a virtual machine. It's not what I'm after here.

  I want to know is the use of VMware workstation (v6 and v7) is available on a multi-core worksation host physical cores.

  I have a scenario where we have several virtual machines containing sensitive coding environments. The material that they are on is a little old and we don't have the time or the knowledge to recreate systems (a combination of Matlab, DSpace and some custom coding). Our only option (and we did it for a couple with success so far) is to create virtual machines of these workstations.

  Which is absolutely essential for us is the material we choose VMs on host. Virtual machines will use simple/double/processors virtual.

  In order to choose the correct hardware platform, I need to know if VMware workstation is running an instance of the virtual computer within a single processor (in this case is the reduced performace?), or if there are multithreaded and make the most of the hardware it will run on.

  (We are not welcome, never more 2 virtual machines at the same time)

  Any suggestions on material would be appreciated also. I think of something based around a core of Xeon 4-6 with 12-16 GB of RAM.

  Thank you very much

  Nick

  Correct, for laboratory/debugging and interaction VM Workstation is pretty good.

• Station working 12, after suspend and resume, kills the host graphics performance (15.10 Kubuntu/Ubuntu host).

  When I suspend and resume my comments on VMware Workstation 12 Pro systems, using the command "vmrun suspend", my system very fast host (Kubuntu 15.10) suffers from a terrible performance issue after standby.  Graphic files, such as photos, now take 20 seconds to display on the host system to the place instantly. Here is an example of command that shows the problem to a 2.5 MB JPEG file on my host system.

  display of $ IMG_1234.JPG

  Other graphics software become even slow on display: geeqie, eog, etc.. However, the cp command is always instantaneous for the same file, so the problem does not seem to be related to the disk:

  $ cp IMG_1234.JPG whatever.jpg

  
  

  The problem remains until I have suspend the VMs system again (or stop).  If I take it back once again, the problem sometimes returns immediately. Other times it comes back after a few hours or a few days. (The problem is intermittent, but suspending the VMs always makes the problem go away.)

  If the graphic file is small, it displays quickly.  The slowdown is proportional to the size of the graphics file.

  When I run a strace of the 'View' command, I see that the delays are produce for the read() of the image file. No errors appear in/var/log when the behavior occurs.

  I suspend the VMs every night automatically (vmrun suspend) before that cron runs a backup of the entire system (using rsync). Then I have them back manually in the morning when I wake up. Sometimes, the problem is present and sometimes not.

  Two virtual machines use shared folders to access the host system.

  The problem started after upgrading my host of Kubuntu 14.04 15.10 LTS, and VMware Workstation version 10 to version 12. (Both at the same time.)

  System details:

  • VMware® Workstation 12 Pro, 12.0.1 build-3160714. Two virtual machines: Windows XP and Windows 7 Professional.
  • The host system: 12 cores, 32 GB of RAM (28 GB free), SSD
  • Using the new system for graphics (G-Force graphics cards)
  • Under Plasma (KDE) for host GUI.

  Thanks for any help!

  The issue is resolved by disabling hugepages transparent in the nucleus of the host.

  Non versioned: VMware workstation 11 on Ubuntu 15.04 high utilization of the processor resolved

• Cannot access a network share on the host

  Hello

  I have a shared folder on the host (Windows 7 x 64, 8 GB RAM). I'm unable to access this part of the guest VM (Windows XP x 86). In fact, I can't locate the other computer in the network (Win7) or "Network Neighborhood" (Windows XP), although the two computers are on the same workgroup. I have to do something really stupid. With the help of VMware Workstation 7.1.0. If you want to provide me with more information, I would be happy to do so.

  Thank you very much in advance.

  These requirements are:

  -NetBIOS must be enabled (TCP/IP properties)

  -No WINS server must be configured (it is the case)

  -Node type should be B or H (ybrid) (reactivate on reviews)

  -No packjest NetBIOS must be filtered (disable all firewall)

  -Microsoft Networking and file sharing and printing must be enabled in the connection (which seems to be the case)

  -'Computer browser' service is running

  -'Server' service is running

  -Connection (not XP) must be set to 'private', not 'public '.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• CPU/memory of the ESXi host totally access & usage and temp CPU with PowerCLI.

  Dear all,

  I am struggling with the CPU/memory reading of the host completely & information about the use of PowerCLI and the temperature of the CPU is also very useful for me. I used "Get-VMHost-name" to get VMHost to object, but cannot get its properties such as CpuTotalMhz, CpuUsageMhz, MemoryTotalMB, MemoryUsageMB.

  And also do not know which object has temporary information of the CPU. Thank you!

  You probably have a fairly old PowerCLI version (4.0).

  We'll see if the upgrade solves a number of these problems.

• CentOS 5.5 100% CPU use 50% of the CPU of the host - very simple config

  Hello.

  On an upgrade on ESXi 4.0u1 - & gt; ESXi 4.1, I got a CentOS 5.5 32bits with VMware tools and local storage SCSI RAID5.

  Host: IBM x 346 Intel Xeon 3, 4 Mhz single core, hyper-threading, dual-CPU 10 GB of RAM.

  VM: CentOS 5.5 32bits, kernel 2.6.18 - 194.11.1.el5 #1 SMP

  VM resources: 4 vCPU, 4096 MB RAM, affinity and default limits

  I've got high utilization of the processor on this light apache + mysql box. In order to optimize the system, I came to this observation:

  -When my CentOS VM uses 100% cpu, the ESXi host uses only 50%

  My question is: why is it impossible to use more cpu, as this the only VM on the host?

  Clues or tips?

  TIA

  First of all, you have an absolutely incorrect configuration.

  You see 2 CPU * HT * 1 core = 4 logical processors in ESXi. But actually it's only 2 physical cores, and you should not give any VM on the ESXi exceeding 2 vCPU, because it isn't real processors and VM is not aware of it.

  If you have 2 virtual machines with 2 vCPUs each then Yes, HT will give performance gain, but not in this case.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• CPU Incompatible requirements with the virtual machine to the host.

  Hello

  I've been running ESX 4 with all my hosts upgraded to the last V hardware + tools for about a week now.  I don't know if its been always do this same thing because I'm not sure if I tried to migrate the server before after the upgrade, but I get the following error when trying to validate the hosts:

  Host CPU is Incompatible with the requirements of the CPUID machine 0x1 'ecx' register

  Bits of the host: 0000:0000:0000:1000:0010:0010:0000:0001

  Required: 1000:0000:0000:100 x: xx10:0x1x:xxx0:x 001

  Inconsistency detected for these features:

  It will start on any host without a complaint.  Running Server 2003 x 64 but it isn't the only x 64 server and there is no other problem with any of the other servers.  All hosts are x 64 servers HP compatible all identical, all purchased at the same time.

  Does anyone have an idea why its complaing?

  Thanks for the help

  This is a known issue, see this KB

  http://KB.VMware.com/kb/1011294

• The performance of the host CPU / use

  I noticed a strange behavior that one of the esx host processor cores work 100% all the time, see attached file shows running HOST - CPU 1 - 0 at 100% all the time, CPU - 1, 2 and 3

  are not, if I take a quick glance at other hosts, the use of the CPU are also almost evenly divided into 4 cores of the processor... is this normal behavior for the HOST-1?

  (cluster DRS/HA 6-host running on 3.5u2 and 2.5u3)

  Connect to the ESX host and high performance and type 'P', to sort by CPU usage.  See that heavy trucks are at the top.

  Remember that the service console runs only on CPU - 0, then it would follow that something running on the service console of that eats the host CPU, or there is a problem on this machine.

  -KjB

• I am unable to stop the hosts of loading process, because it takes a lot of memory

  I am unable to stop the hosts of loading process, because it takes a lot of memory

  Hello

  Some processes have to load, however, you can use these tools to check those and look for ones that
  can use a lot of memory after loading in the Manager of tasks - processes tab - CTRL + SHIFT + ESC
  Check the CPU column.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Filter host Microsoft windows search burning my CPU usage.

  Original title: Filter host Microsoft windows search

  Filter host Microsoft windows search burning my CPU usage.

  Help me.

  Had the same problem and DiaconuDanielsolution worked for me as well - took some time to recreate the index but then everything was fine - thanks

• Question for the host resource

  Hello

  We have 1 blade that hosts a physical SQL Server on it. The resources of this blade are 10 total to 20 cores processors and 512 GB of RAM on it. We want to virtualize it soon, but we don't have any other guests that we could use this size. We have a few available hosts that are 8 to 16 cores CPU and 256 GB of RAM. I was hoping that I could create a cluster with 2 of these hosts and virtualize the largest physical machine in the cluster. I know that when I virtualize this machine, he will live on one of the hosts at any given time. My question is if these hosts would be 'pool' their resources so that this machine could use more than a single host would offer it. Is it possible at all or not? If not is there another work around for this problem I have?

  We are on vSphere 5.5

  Thank you

  My question is if these hosts would be 'pool' their resources so that this machine could use more than a single host would offer it. Is it possible at all or not? If not is there another work around for this problem I have?

  No, the maximum resource that can use a particular virtual machine will be limited by the maximum available on a single host computer running this VM particular resource. Workaround is to add more physical resources on the host or create the virtual computer with limited resources. Are you sure that your virtual machine uses really 20 the processor cores and 512 GB of RAM? Most of the workload running on the physical server uses all resources.

• upgrading processor on the host ESXi5

  I'm about to upgrade the processor on a Dell T100, which has installed on hypervisor ESXi5.  There are also 2 Windows VMs.   I wondered what would happen to the virtual machines, once the host processor is upgraded.   Do I need to remove the vCPUs and also to re-install VMtools or the upgrade would not affect virtual machines?

  You should not need modify the virtual machine settings, unless you have configured the CPU affinity or your new processors have fewer cores required by the virtual machine. However, as the model/type of processor is seen by the virtual machine, the virtual machines Windows may require reactivation.

  André

• The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode.

  Hello everyone

  Here's the situation...

  I have:

  vSphere 5.1 Cluster with two 5.1 ESXi hosts and configuration VSA.

  vCenter Server running on a virtual Windows Server 2012 machine.

  Task: Transfer virtual vCenter to a physical machine.

  I have install the physical machine with Windows server 2012.

  Installed vCenter 5.5 (hosts Newer then the ESXi 5.1)

  VSA installed Manager (VSA Cluster 5.5)

  When go to VSA Manager I am introduced to the following screen...

  

  Recover DOES NOT work!

  Full move operation DOES NOT work!

  It recognizes the Cluster AUV-> check availability (is online and OK)-> begins to create the Cluster VSA and it fails with the following error...

  Move the cluster host

  VSA HA Cluster

  The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode. Under voltage or suspension of the virtual machines on the host can use the CPU features hidden by this mode.

  Could someone please help?

  Thanks to you all! This problem has been SOLVED as follows...

  • VCenter Server go to--> "C:\Program Files\VMware\Infrastructure\tomcat\webapps\VSAManager\WEB-INF\classes".
  • Open the file "dev.properties" with Notepad
  • Change the line that says "evc.config.baseline = lowest" to 'highest = evc.config.baseline' and save the file.
  • Perform the SERVICES. MSC and reboot 'VMware VirtualCenter Management Webservices'

  After that it of back in the VSA Manager and run it again 'Cluster of VSA recover'!

  Now, the wizard should be able to add hosts to the inventory, create the HA Cluster and add hosts to the HA cluster and configure Cluster HA.

  Done everything! :-)

• When you run a single virtual machine on the host computer, is it ok to assign all the processors for comments

  I have a single guest Windows 7 Pro running on the host ESXi 5 U1.   It will always be in a 1-1 configuration (we needed server hardware, but with BONES desktop for purposes of licensing).  The host CPU is an E5603 (Quad - core 1.6 GHz).  I want the guest to have the maximum amount of possible processor cores, because a true multi-threaded application runs.  Because Windows 7 is limited to 4 cores, I disabled hyperthreading on the processor so that when I assigned 4 cores the VM, I get all 4, not the half because of hyperthreading.

  I am setting for claim processor between the host and the guest?  Should I only assign 3 carrots to the guest while it is still available for the host?

  With the requirement, it's guessing more than knowing what to configure. I think that with 2 Dual-Core configuration, I suggested above, you're on the save side.

  André