The local pure edition support?

Similar Questions

• Moto X 2 Pure Edition - where are the updates?

  I have a MotoX2 Pure edition phone and have not received updates for the lollipop because I got it in December. I'm on 22.21.11 which has its fair share of bugs that I lived with for 3 months. Last month, I noticed that the MotoX2 ATT phones began to receive 5.0.2 and now see that 5.1 is on the horizon, so I wonder where the "updates faster for Pure Edition models" are? I talked to both Motorola and TMobile and here is what I said: Pure phone edition is based on TMO so I will only receive updates of this nature from TMobile (no Motorola, Google or ATT - which is what phone service that I use on this phone). Additional tmobile is not officially support (or sell) the MotoX2 (which I find really weird since the Pure edition is based on TMO codeset) they are neither listed on their list of update of Lollipop (5.0.x)...

  Does anyone else know this or different?

  All updates for Pure edition devices come directly from Motorola. If you are using a version of Moto X XT1095 there was no released update yet for her since 5.0 was sent. The AT & T version (XT1096 I think) brand received an update which brought to 5.0.2 so far. With the release of the update, 5.1 and seeding of this one at POM it is probably good to assume that Pure edition will receive this update. It holds more than 14 000 corrections and changes according to the newspapers, and should be worth the wait.

• Windows wants to renew the IP address for the local network 2 to repair but cannot and says: network support contacts Manager. Don't know what to do

  Recently went to microcenter and added 2 GB memory and ethernet for cable service connection to the computer. Perhaps this new connection is LAN 2...

  Please elaborate on what has been done to add "an Ethernet for cable service."

  Please describe the physical connections from your computer to the Internet (i.e. where make the thread go?).

  What version of Windows you have, including the service pack (right click on desktop and select Properties, if you do not know)?

  Open network connections (start > run > ncpa.cpl > OK).
  What icons are listed?
  Click on each connection to the Local network and review the blue column on the left side of the window, at the bottom under the heading.  Please provide the information displayed (unfortunately, it cannot be copied, so you do not have to re - type).

• access denied to the local disc (c :))

  access denied to the local disc (c :))

  Read the article below and post back with all the relevant information. Thank you.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think. Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• VCenter 4.1 connect to iso image on the local disk

  Hello

  I have a question about certain permissions in vcenter 4.1 until now, we have used vcenter 4.0 and we had a few asigned security role with permisions them following: all privileges: Virtual Machine: Interaction: configure support CD; Configure floppy Media; Interaction of the console; Turn on; Power off; Reset.

  It is basically the minimum requirements for some of our clients to witch we sell vps servers.

  My problem is: given that I've updated vcenter 4.1 security to configure cd media does not seem work apropriately. The only option witch is not grayed out is connect to the host device. The possibility to connect to iso image on the local disk or connect to the physical drive D: (local client CD-ROM) are greyed out.

  Someone knows something about this security role change and what kind of extended privileges do I have to add in order to make it work?

  Hello

  I think you should also "connection device"...

  In addition, there may be one advanced virtual computer that denies this capability... Here are the parameters of the isolation and many guides say to turn it off.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• The Apple Watch edition series 2 have Nickel in it?

  I wonder if the Apple Watch edition series 2, a ceramic white, contains any Nickel

  Hello

  Apple says that the magnets in Apple Watch and strips contain some nickel.

  • Port Apple Watch - Apple Support

  If you want to specify any information specifically regarding Apple Watch Edition (series 2, with ceramic case), I suggest that you contact the Apple Store sales support:

  http://www.Apple.com/contact/

• When I try to send an email to multiple recipients, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. This is not

  I bought a new computer. When I try to send an e-mail to multiple recipients, now, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. It is not yet supported. If please change this address and try again. "I don't know what are the non-ASCII characters, so I don't know what to do. I never had this problem on my old computer. Please explain in simple language.

  The 'local' part in the context of email addresses, the part to the left of the symbol @. The warning is a bit of a surprise, because in general the owner of a mail server is relatively free to specify the address format. There is a movement to allow the games to other characters to be used in the fields, so I'm a little disappointed to see that, apparently, e-mail does not support the latter in the local part yet or it can be your SMTP server that generates this message.

  ASCII characters ("American Standard Code for Information Interchange") are, on the whole, the English alphabet, uppercase and lowercase, as well as figures, common punctuation and case of things like the asterisks, obliques and media bars, but not of accented characters. But even apparently simple things like spaces and dashes have cousins who, at first glance, appear to be identical, but are not represented in the ASCII system. I am thinking especially nonbreaking spaces, dash and half-quadratin.

  But I don't know why your new computer must have caused these warnings.

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• Satellite A105-4114 will not recognize the connection to the local network

  Whenever I plug my cable ethernet to ethernet port on my laptop, the ethernet port does not recognize my cable, even if the lights are flashing. I updated my LAN driver a week ago, and it has not really helped. My internet service is provided by my apartment complex at the school, but I don't think it has anything to do with it, because I had this problem last year living in dorms and at home. I have to restart my computer everytime for my computer to recognize the connection to the local network. Can someone help me please?

  Driver: Intel (r) PRO/1000 PL Network Connection

  Wireless connection works fune.

  Hello

  First of all, you should check your LAN cable.
  Sometimes the laptop may not be correctly connected to the LAN as a result of a defective cable.
  In addition, you should check if the network card is properly recognized in Device Manager. He should t be a yellow exclamation!
  In addition, you must check the settings for the TCP/IP protocol in the LAN card properties.
  TCP/IP must be set to automatic. I assume that you are connected to a server and the server supports supported a range of IP addresses and assigns it automatically.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them

• Re: Satellite P500 of USA - can not read the local DVD

  Hello

  Sorry to appear such a luddite acquired but this laptop great USA from eBay.
  User manual appears to indicate that the player is going to adapt to the locality of the drives I want to play.

  Not had any luck with playback at all to this day, the error message 'not compatible' etc., any guy of suggestions?

  See you soon,.
  Michael

  Hi mate

  I think that the portable player s (optical disc) DVD region is set in the United States and therefore you can not read the DVD released for the European market.

  To resolve this problem, you must change the option of DVD region 2 region.

  My computer-> drive CD / DVD-> properties-> Hardware tab-> choose the CD drive / DVD-> properties-> DVD region

  Notes; You can change this settings ONLY 4 times. After that the parameters is no longer editable.

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• ProBook 6440 b: cannot upgrade to Windows 10 - "The CPU is not supported" error message

  Hello everyone

  I have a HP ProBook 6440 b. CPU is intel core i7 M640. It is currently running Windows 7 64-bit edition. I'm trying to update to 10 Windows using Windows 10 Upgrade Wizard and it gives me error. It says "Windows 10 does not work on this PC. The CPU is not supported (NX). »

  Any help will be appreciated. Thanks in advance.

  Hello:

  I suggest that install you the upgrade from the DVD (authoring tool of your own from the link below - media Make).

  https://www.Microsoft.com/en-us/software-download/Windows10

  The DVD will bypass the hardware checks.

  Also, when you install W10 from the disk, skip verification of updates when you are prompted.

• Satellite Pro A100 has "limited or no connectivity" & no connection to the local network

  Hello!

  I + really + hope someone might be able to help with this - been going slowly crazy.

  Bought my A100 18 months ago in Australia while I lived there and had no trouble to connect to LANs and others with my wireless. Everything was shipped over to me (here in London) last week and everything seems to have gone pear shaped. The House I live in has Wireless Broadband comes with our Sky Cable subscription, working on (I think - there is no real marking on the device) a router wireless Netgear A/G dual band (108 Mbps 802.11 b/g network). My laptop model is: SatellitePro A100 (part No.: PSAACE-007002EN) and it works on the following network hardware (drivers installed in brackets):

  1394 net adapter (5.1.2535.0)
  Intel(r) PRO/1000 PL Network Connection (9.2.24.0)
  Intel (R) PRO/Wireless 3945ABG Network Connection (10.1.0.13)

  I used the Sky Broadband installation disc to set up the network, but every time I try to connect it tells me that I have "Limited or no connectivity" and will not let me online. I've been on the phone for Technical Support of sky for hours, trying to get this sort, but when I plug in the Ethernet cable to the laptop it will not even get to communicate directly with the router (i.e. put the IP address of the router in explore and view the settings of the router). My 'Connectivity Doctor' shows there is a problem with my wireless connection (which the network has not assigned a network address of the computer), but no problem with my ethernet connection and yet neither will allow me to get online and every time that I try to repair the wireless connection I get an error message saying that Windows could not renew the IP address.

  I have disabled the Bluetooth, reset the router I don't know how many times and made sure that all cards have been activated and crosses without bad red and yellow exclaimation in Device Manager. All network devices seem to be "working properly" (according to the properties of the device).

  After days of weeding through the proverbial haystack of resources online while at work, I think that the problem is either something very simple (i.e. a setting random advanced configuration). I read somewhere as you will need to 'install' the router on the system, and that is not "plug and play" as Sky Broadband seems to have deduced by phone... but I would have thought the installation CD has done this, as when I discovered my connections (when the Ethernet cable is plugged in), it recognizes the connection (it won't only ++ anything). If there is no specific process I need to follow in order to properly install the Netgear router (for which I am currently trying to see if there are appropriate drivers, I need to download), I'd appreciate a lot of the age of enlightenment! It could also be a question that I need to reset the network key in the security settings of the router, as there are already three computers in the House connected to the network... but of course I can not do without first sorting on why my laptop can still communicate with the router via the Ethernet connection.

  Points to note:
  -My laptop runs on Windows XP Professional Version 2002 Service Pack 2
  -The disc to install Sky Broadband installed Internet Explorer 7. the last time I was online, I think that I was still using 6.

  If anyone could be of any use to solve this puzzle, you have earned yourself my eternal gratitude!

  -Danielle

  Hello

  I think that the solution should be simple;
  I presume that you TCP/IP settings are false. I mean that the settings should be set to automatically assign the IP address.

  Please check this box. Simply go to the network connections-> local network connections TCP/IP properties properties

  He put everything on automatic