The Microsoft Unified Security Protocol Provider security package has generated an exception LSA (lsasrv with) the event ID 5000
I am operating Windows 7. I get this error that I see in my event log, Event Source LSA ID (lsasrv with) 5000, which translates the message that Windows has encountered a critical error and will stop in a minute. My research looking for the solution indicates that this error is not applicable to Windows 7, but that's it! It happens every hour approximately. It was supposed to effect Windows2000, so whenever I search, it says any fix does not work on my machine. No idea how to fix this error before the reinstallation of the operating system?
"Provider = name"lsasrv with.
GUID ="{199FE037-2B82-40A9-82AC-E1D46C792B99}" / > "
Provider of
Thank you, Rick
Hi Rick,
Thank you very much for the detailed information.
If the error only occurs after the server has been rebooted, it is likely that a service tries to authenticate before the directory service is available. Lsasrv.dll library is required by windows and is used to perform the encryption/decryption and local password hashing. Lsasrv.dll is flagged as a system process and does not seem to be a security risk. However, removing the LSA Server Library might harm your system.
Corrupt Lsasrv.dll file could lead to this problem. You can download the file from any .dll and register again on your computer. But we do not recommend this.
I suggest you to run the System File Checker command to check if there is any violation in the system files that may be causing the problem.
To run a SFC scan.
Please follow the link https://support.microsoft.com/kb/929833?wa=wsignin1.0 to make a SFC scan on the computer.
If the problem persists, then we run check disk command to find the volumes on your hard disk for problems.
To run the check disk follow the steps below:
1. right click on the Windows button.
2. choose command line (Admin).
3. in the command prompt window, type the command Chkdsk C: /F and press ENTER.
4. this process will take about 20 to 30 minutes.
The above command corrects the bad or corrupt volumes in C:\ drive. After you run the check disk command, check to see if the problem persists.
Warning: The data available on bad sectors could be lost whenchkdsk trying to repair your hard drive.
Please respond to this post with the State to help you.
Tags: Windows
Similar Questions
-
Microsoft Office Security updates has failed-0 x 80040154
Original title: open the file diag.cab in the windows update search - how to?
Windows update fails repeatedly, despite the withdrawal of 32 bit Vista Home premium and to do a clean reinstall. Office 2010 Professional Plus was also deleted and performed a clean installation. Shortly after the new installation, the update process has been very successful. Now, he returns to the 0 x 80040154 which was the reason for doing all the work.
Hoping that running Windows Update automated convenience store, that the problem could be better identified and respected. Note that all updates failed, so far, since the work of reloading - are all the Office updates. We try to avoid the loading of third-party solutions, because the risk is a concern.
Gene
Hi Scott,
Keep the computer in a clean boot and check the status of the issue. Own avoids the other application conflicts.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.
http://support.Microsoft.com/kb/929135
Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.
I hope this helps.
-
I have recently upgraded from XP Service pack 1 to Service pack 3 and now have IE8 and Norton 360.
Hi Racheala,
You have any startup program... Click Start-> programs-> startup. Try the clean boot mentioned in process:http://support.microsoft.com/kb/310353.
I hope this helps.
-
I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?
Windows Vista SP2 came out mid-2009. You should have gotten a long time ago.
-
HI am kouadio.
Then connect to remote desktop of my PC giving credentials he strikes me an error like
"An authentication error has occurred. There is no such thing as the security package.
Please can someone help me and tell me the solution for this.
Thank you
Kouadio
Original title: Remote Desktop error
Hi Steve,.
Provide us additional information to help you better with this issue:
- You did changes to the operating system before this problem?
- Your device is connected on a network domain or a Windows Server?
- Exactly how you try to access the remote desktop?
If your device is connected to a domain network / server Windows, please post your request in the sub forums. We have a dedicated team for help you with this problem.
Otherwise, you can view the Microsoft Help article below and check if it helps.
Connect to another computer using Remote Desktop connection
It will be useful. Get back to us with an updated status of the connection to the remote desktop, we will be happy to help you.
Thank you.
-
Computer crashes microsoft windows security audit event id 4624.
Hi all.. Im having some problems with my computer hanging while I listen to music these days... I looked in the Windows Event Viewer and that's what I found with the corresponding times. It's only annoying of any help that you can suggest would be great. I'm using Windows 7 64 bit
Error description:
An account has been connected successfully.Object:
Security ID: SYSTEM
Account name: MATT-PC$
Domain account: WORKING group
Logon ID: 0x3e7Logon type: 5
New logon:
Security ID: SYSTEM
Account name: SYSTEM
Account domain: NT AUTHORITY
Logon ID: 0x3e7
Logon GUID: {00000000-0000-0000-0000-000000000000}Process information:
Process ID: 0 x 204
Process name: C:\Windows\System32\services.exeNetwork information:
Name of the workstation:
Source network address: -.
Source port: -.Detailed authentication information:
Logon process: Advapi
Authentication package: negotiate
Transited Services: -.
Package Name (NTLM only): -.
Key length: 0This event is generated when a session is created. It is generated on the computer that was consulted.
The fields of the object indicate the account on the local system that requested the opening of session. It is more often a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the type of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The new session fields indicate the account for which the new logon was created, which is the account that was logged.
The network fields indicate where source opening of remote session request. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information on this specific logon request.
-Connection GUID is a unique identifier that can be used to correlate this event with a KDC event.
-Transit services indicate which intermediate services participated in this logon request.
-Name of the package indicates what auxiliary Protocol was used among the NTLM protocols.
-Key length indicates the length of the generated session key. This will be 0 if no session key was requested.Details
- < event="" xmlns=" http://schemas.microsoft.com/win/2004/08/events/event ">"-< system="">< provider="" name=" Microsoft-Windows-Security-Auditing " guid=" {54849625-5478-4994-A5BA-3E3B0328C30D} ">< eventid="">4624< version="">0< level="">0< task="">12544< opcode="">0< keywords="">0 x 8020000000000000< timecreated="" systemtime=" 2009-12-10T00:50:23.253155100Z ">< eventrecordid="">9073< correlation="">< execution="" processid=" 540 " threadid=" 1596 ">< channel="">Security< computer="">mast - PC< security="">-< eventdata="">< data="" name=" SubjectUserSid ">S-1-5-18< data="" name=" SubjectUserName ">MATT-PC$< data="" name=" SubjectDomainName ">WORKING GROUP< data="" name=" SubjectLogonId ">0x3e7< data="" name=" TargetUserSid ">S-1-5-18< data="" name=" TargetUserName ">SYSTEM< data="" name=" TargetDomainName ">NT AUTHORITY< data="" name=" TargetLogonId ">0x3e7< data="" name=" LogonType ">5< data="" name=" LogonProcessName ">Advapi< data="" name=" AuthenticationPackageName ">Negotiate< data="" name=" WorkstationName ">< data="" name=" LogonGuid ">{00000000-0000-0000-0000-000000000000}< data="" name=" TransmittedServices ">-< data="" name=" LmPackageName ">-< data="" name=" KeyLength ">0< data="" name=" ProcessId ">0 x 204< data="" name=" ProcessName ">C:\Windows\System32\services.exe< data="" name=" IpAddress ">-Thank you for any information you can provide... im a noob when it comes to such things.
Hi Mkress,
Welcome!
You can get this error if Windows Error Reporting Service does not start, try to restart the service on the computer and check if the problem persists or not, follow the steps below to start the service:
1. click on start.
2 type Services in the start search.
3. look for Windows Error Reporting Service in the list.
4. right click on the Service.
5. click on properties.
6. set the Startup Type to automatic.
7 set the starting state.
8. click on apply.
9. click on OK.
Now restart the computer for the changes to the effect.
I would say that you do the check disk on the computer to find the bad sectors and disk related errors on the computer, follow these steps:
1. the procedure for chkdsk to run:
i. Click Start
II. type cmd in the start search box.
III. right-click on cmd.exe list programs and then select the run as Administrator option.
IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
v. in the command prompt window, type the following command and press enter Chkdsk/r
Note: When you restart, Windows checks the drive for errors, and then Windows starts. Now, run the disk check in the command prompt.
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security. I ran Netstat-no, but data flashed on the screen, but I can't freeze it at the screen to display the data. What keys down to hold the data on the screen to display it.
Thank you, OTTOoriginal title: interruption tcp/ip connect limitsHello
Try the steps below and check if the problem persists.
Step 1:
Run the fix provided in the link below to reset TCP/IP and check if that helps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
Step above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
Step 2:
You can check the link provided below for more information on the use of Net command in Windows XP stat.
Netstat
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/netstat.mspx?mfr=true
-
Audit failure Microsoft Windows security. 4625 login
Passe spent Review Journal windows 2008 r2, that is windows 7 from two computers constantly try to start the session. I spent the antivirus, antispyware, malware, etc and detect any virus, Trojan horse, worm, on computers. You can help resolve makes these applications and how to eliminate.
The port is changing from 50 to 65000. the log message attached
Thank you
Failure of 29/05/2013 audit audit 08:53:02 Microsoft Windows security. 4625 login
Failure of 29/05/2013 audit audit 08:50:32 Microsoft Windows security. 4625 login
Error on the login account.
Object:
Security ID: NULL SID
Account name: -.
Account domain: -.
Logon ID: 0x0
Logon type 3
The typical error log:
Security ID: NULL SID
Account name: MARIA-PC $
Account domain: VFM1
Error information:
Reason for the failure: unknown username or bad password
Status: 0xc000006d
Subreport: 0xc0000064
Process information:
Caller process ID: 0x0
The name of the calling process: -.
Information network:
The workstation name: MARY-PC
Source network address: 192.168.1.207
Port: 50506
Detailed authentication information:
Logon process: NtLmSsp
Authentication package: NTLM
Transited Services: -.
Package Name (NTLM only): -.
Key length: 0
Hi Javier,
The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Keep us updated on the status of the issue.
-
After a strange phone call trying to sell me a security package, I have a virus
Original title: programs network networking Internet site Internet Site Web Web Site URL of the network
How can I get rid of stuxnet virus I was on the phone a lady phoned me on windows and I had a virus that we've been through a few little things on pc and when I realized that she was selling a security package, said, I refused it and the next thing I know I have this virus help
Hello
I suggest you to try the steps below and check if it helps.
Method 1: Try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Hope this information is useful.
-
Error no Microsoft Baseline Security installed
Original title: I just used Microsoft Baseline Security and he says I don't have MBSA on my computer and that's what most of the problems are. Can you help me. my address is * address email is removed from the privacy *.
My email address is * address email is removed from the privacy * if you need. My computer is not working correctly and it says I need MBSA
Hello
1. What is the exact error message you get?
2 did you a recent software or changes to the material on the computer?
I suggest you to go through the Microsoft article and check.
Microsoft Baseline Security Analyzer 1.2.1 frequently asked questions
http://TechNet.Microsoft.com/en-us/library/dd229318
See also:
How to: use the Microsoft Baseline Security Analyzer
http://msdn.Microsoft.com/en-us/library/ff647642.aspx
How to set performance options in Windows XP
http://support.Microsoft.com/kb/308417
We provide more information if you need help.
-
What is MICROSOFT. WINDOWS. SECURITY. INTERNET EXPLORE Spybot search & destroy found the file. Can I remove or ignore.
You will find in favour of Spybot in these forums: http://forums.spybot.info/
Tip: microsoft.windows.security.internet explore is an NNTP address for it now interrupted (on MS newserver) security IE specific newsgroup, always available via some package newsservers & Google groups, but there is nothing but spam messages now => http://groups.google.com/group/microsoft.public.internetexplorer.security
-
How to change the ID of 'security' other than 'NULL SID"in the"Event Viewer"on WinSrv2008
Hello
I'm working on the Windows Server 2008 system.
I would like to be displayed in the event viewer ' ' the correct ID 'security' (it is always displayed as "SID NULL" instead of the right domain/username) for the logon task (event ID: 4624).
For the task of the closing session, the security ID is displayed correctly.
Thank you for your answers
Hello
The forum Microsoft Community are for consumer issues. Windows Server issues should be posted in the TechNet Windows Server forum, where they specialize in Windows Server.
Thank you
David
-
I forgot my microsoft internet security and acceleration server password and username
I forgot my user name and a password for microsoft internet security and acceleration server
Hi Tom,
Unfortunately, we are limited in what we can do to help with password lost or forgotten by Microsoft Policy, which applies to anyone who answered questions here. http://support.microsoft.com/kb/189126. But there are a few options to try:
You have another administrator account where you know the password that you can connect to the password changes to this account?
First of all, make sure that you do not have the CAPS LOCK SHIFT keys or Numlock enabled - this can change what you think, you type in something else (different case or a number or a letter) and the system see what you entered as incorrect.
Second, if you have another keyboard, you can use with the computer, try to do this. Maybe it's that one of the characters of your password is not working properly on the keyboard or the keyboard is inserting extra spaces or something else that makes you think that you enter won't be not what you're really in.
Unfortunately, if this does not work in this case the only option, we can suggest is to restore the system to factory conditions (or do a clean install). But too late for this time, next time create more than one administrator account in order to have a backup in case something like this happens again. A new installation will create a new administrator account. It allows to do some backups to avoid that from happening.
I'm sorry, that we cannot do more to help.
Good luck and best wishes!
-
Microsoft Baseline Security Analyzer
What version of this I should download to my home pc which has windows service pack 3? and where can I find the version?
Start here: Microsoft Baseline Security Analyzer.
-
Could someone help me please I have developed a problem with my CFS3 and the addons when I double click on icons and it comes at the start screen, I get the message that there is an issue that caused the program will stop working and what happens with all the addons it seems to touch anything related to bag 3 and ALL my other apps are working OK. I tried to reinstall CFS3 but whether available I even went to the system restore, but no joy, could someone help me on this, I suspect that it's files a.dll but it is what it is, whether it's the no CD crack I can't say. I downloaded some pictures to give you and idea. your help would be very appreciated Gary
When I run CFS3 happens to the start screen, a message if poster indicating a problem caused the program is not working and it seems to me that this happened after the last security update has been installed. I tried the system restore, but did not work.
I am running windows vista 32 bit with a phenom with service pack 2 procecssor.
Guys please help us passionate cfs3 I've seen forums that I'm not the only one with this problem can a patch install in to solve the problem or do I have to reinstall my windows.
E-mail address is removed from the privacy *.
Hi Gary,.
If I understand correctly you are faced with the question with the Combat Flight Simulator 3 after installing a recent security update. You need to reinstall the game after you install the security update. I would say to contact Combat Flight Simulator 3 support for assistance.
http://www.Microsoft.com/games/combatfs3/support.aspx
Hope the information is useful.
Maybe you are looking for
-
Mouse/mouse pad does not work on my Satellite M30X
Hello I started having problems with mouse pad & mouse on a Satellite M30X. By clicking on the icons on the Desktop gives erratic results as evil etc start application and does not. The operating system has been reinstalled with a new hard drive and
-
Number of FPGA FIFO DMA channels
Hey there, to understand some of the problems in my FPGA VI, I wanted to know, as I need to see the count of 3 FIFO of DMA channels available: (1) the total number of DMA FIFO created in the LabVIEW project (2) the number of DMA-FIFO-method-nodes of
-
On my new Officejet Pro x 476 the 'print shortcut' settings a setting 'factory' and 'general regulations of every day ". What is the difference? Affect print quality that I do not see anything and the speed appears to be the same "" "project had prev
-
How can I activate the low battery alarm?
How can Studio xps 1340 I activate the audible alarm for low dough?
-
Can connect to with the bad IP and the subnet RVS4000
Hello I'm relatively new to networking so that post in the forums, please be gentle. I have a strange problem. I tried to update our switch of production over the weekend with a new Gigabit switch. Everything was going well after the change and the n