The mouse stop scrolling on Satellite T130

Similar Questions

• I use the mouse for scrolling wheel. It stopped working during the installation of the V4.

  I use the mouse wheel to scroll on my desk and the button of "middle" in conjunction with the pointer on my laptop (lenovo thinkpad W500) node to simulate a mouse wheel. At the point in time, I upgraded firefox to V4, this function stop working. I tried it in IE and it still works there, and it still works in swriter OpenOffiice.org , so it is not something has changed in the hardware or the operating system (XP). Any suggestions?

  Try this:
  
  Type of topic: config in the address bar, press ENTER, Firefox asks if you want to access the settings, say yes you know the risk.

  When the list of configurations to come, type track point in the filter area, you will see a frame ui.trackpoint_hack.enabled , that change from-1 to 1. Now you should be able to scroll through the help of trackpoint and the Center button of the mouse on the trackpad again.

• Explorer Touch Mouse mouse stops scrolling

  I have a Touch Mouse Explorer I use with Windows 7 Professional 64-bit (all updates current).  My mouse drivers are the mouse and keyboard Center 2.1 64-bit.  FYI... Recently, I formatted and installed clean versions of all software.

  My question has to do with the function of the touch tape.  Overall I am satisfied with the mouse, but often experience loss of the scrolling feature.  There is no specific programs that are affected.  When it works, it works in all programs.  It is the same for when it does not work.

  The way I found to get the scrolling function return is either restart my PC or I disconnected the mouse and then turn it back on.  The two will restore the scrolling feature, but it stops eventually.  It's time for how long lasts the function value.

  Would appreciate any troubleshooting tips.

  Hi Modach,

  Thanks for the detailed description of issue.

  1 did you check the mouse settings in the control panel?

  2 is this problem specific to this mouse? Have you tried using different mouse on the computer?

  This can be for one of the following reasons:

  · Incorrect mouse is selected in the IntelliPoint software.

  · Conflict with other (non-Microsoft) mice or the pointer software,

  · Problem with the IntelliPoint software or drivers.

  · Application does not correctly recognize scrolling the mouse messages.

  To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

   

  Method 1:
  I suggest that you try to change the scroll settings and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:
  If you have any other software mouse that is installed, such as the Logitech software or touchpad, this software can conflict with Microsoft multi touch mouse. If you uninstall these software and check.
  See the link.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Method 3:
  I suggest you to consult the knowledge base article.
  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  For your reference:

  http://www.Microsoft.com/hardware/en-in/support/troubleshooting

  If the problem is specific to Explorer Touch Mouse, see the link:

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  Back to us for any problem related to Windows. We will be happy to help you.

• MacBook pro freezes when the mouse stops

  I have a very strange problem with my Macbook Pro 13 "Retina display.   When I login, the system freezes once I have stop moving the mouse.  If I permanently move the mouse, the system works, but if I stop moving for about 2-3 seconds, the system hangs and I have to force turned off using the power button.  I have troubleshooted all the way to the bottom for a pure install of El Capitan 10.11.6 but even after cleaning install it always does the same thing.  Of course, it looks like a HW problem but I just wanted to see if someone else has had this problem and if there was a solution that was not related to HW.

  mblas49 wrote:

  I have troubleshooted all the way to the bottom for a pure install of El Capitan 10.11.6 but even after cleaning install it always does the same thing.

  It would be more helpful if you listed what you've tried already, we can't look in your mind. But, run the Diagnostics to start.

  Diagnosis of Apple is not as complete as the software they use at the Apple Store, but it can pick up something. Depending on the age of your system, you'll use one or the other.

  https://support.Apple.com/en-us/HT202731

  Diagnosis - Apple Support

  Apple Hardware Test

  https://support.Apple.com/en-us/HT201257

• What would cause the mouse to scroll slowly on Web pages, but normally on text documents?

  I have a strange problem. I have a Logitech M305 mouse on another machine which is too slow scrolling on Web pages. I ordered a new mouse, but today I noticed the old mouse normally scroll in text documents, even though the text document is displayed in Firefox (such as the "subject: config" page).

  Normally, a page will scroll 3 lines for each click of the mouse wheel.
  On Web pages, it changes and it takes 3 clicks of the mouse wheel to get the page to scroll.

  It is troubling to move the mouse wheel and don't have anything happen until the third click.

  So the question is, what would make the mouse wheel behave differently on the Web pages and pages of text, and how can I solve this problem?

  BTW, this is a clean install of Windows 7 64-bit. I use the same exact type of install now on another machine with a mouse Logitech M510 and normally scrolls on all pages.

  OK, a final report on this issue. Yesterday, before installing the new mouse M325, I decided to uninstall the Logitech SetPoint software. I wanted a new installation of the software for the mouse to go with the new mouse.

  To my surprise, after the set point has been uninstalled the old mouse M305 scroll normally on pages of text and Web pages. It seems that something mysterious happened in the relationship between Firefox and the original installation of set point. Firefox made some adjustments or updates of its own regarding record just as it does for modules, I saw it happen a couple of times before. /shrug

  New mouse + set works perfectly with FireFox now and the old mouse M305 + setpoint is now works well with an old laptop XP Pro, at least as long as the button pop-up gimpy holds.

  Solution, in this case: uninstall the Logitech SetPoint mouse software, and then reinstall a new copy of it.

• Can I use the mouse wireless with my Satellite M30x?

  Hello

  I have a question. I have the Satellite M30x and my dealer me Toshiba PA3205U-1ETC optical wireless mouse will sell. In information he said that's the only specific laptop models.
  Can I use it with my laptop? At my laptop this specific wireless adapter?

  Welcome them
  s.Wille
  Sorry for my bad English

  Why not.
  I use a mouse wireless at home. Pout station is connected to the USB port and the mouse communicates with the wireless station.

  I put t see any reasons why you shouldn't t be able to use these mice.

  Greetings

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• The mouse for scrolling in the secondary wheel

  Can someone tell me if there is a way to use the mouse wheel to scroll vertically in a secondary window in 7.1? (I allow the vertical scroll bar, and I focus to the true value.)   I read that it is supposed to work for listboxes, is it supposed to apply to the sub-panels as well?

  Thank you!

  Greg

  No way without writing code as far as I know. When I wanted to do something like this in LabVIEW 7.0, I had a loop that has probed the wheel using the feeding screw and used to generate a user event whenever there was a parchment. I then used that to set the FP. Original in the Subvi property to simulate a parchment. Note that you need to remove the Subvi Panel first, because you can't write the original property to a VI in a MS.

  The order was therefore-

  1. see the updates in the caller (if the user does not see the VI being deleted).
  2. remove the SP.
  3. the original value (and make sure that the user does not have to scroll past the end of the authorized zone).
  4. Insert VI SP.
  5. undefer updated.

• Left click of the mouse stop

  Hey I'm playing this game on the net where I'm supposed to click with the mouse like a thousand times to make my character to do things.

  is there a way I can stop the left click of the mouse to work when my character reaches a certain area.
  my mouse click but when in the game it shows one you know as "level 70 boss appeared" I want as my left click of the mouse to stop the work. You should read this if a level higher than 20 appears to stop working.
  I have to click a thousand times as many times that I miss on these great events of the mouse. But after like the fight against what I want to do functional left-click again. How can I do?

  Hello

  Thank you for your response.

  As the problem occurs in Google chrome, I suggest you to contact the support of Chrome for better assistance on this issue.

  http://support.Google.com/chrome/?hl=en/

  If you have any further questions on Windows, feel free to let us know. It is our pleasure to be of service.

• the mouse stops working during xp startup

  Dell Dimension E520 my friend has xp on it. He got the blue screen on startup. I was able to run chkdsk/r from the recovery console and got rid of the blue screen. However, when the computer starts, it now receives in the user account log in screen (5 users), but the mouse no longer works. The light on the keyboard goes out to halfway through the loading process. I tried different USB ports. But there is not a single death. The mouse and keyboard work fine in the computer diagnostic program. There only seems to be problems with the material, everything passes.

  I tried the Dart program, but when he put the xp splash screen I got the blue screen. He suggested that the mbr is damaged. The drive works on other machines. I resisted using the fixmbr command because of all the warnings on the damage caused to the left if a virus is present. I think that a virus caused this, so I stopped there. Not sure if fixboot will help, have not yet tried. I tried to plug the hard drive into my computer as an external, but it wouldn't let me access the hard disk directly. I am running win7 32 bit. My computer sees the drive, I can fill administrative maintenance hard disk volumes (was surprised to see the OEM - Yes, 3 volumes, the main volume-Yes, don't know about this third volume (a little larger than the volume of OEM), can't do anything for her). I can win permission, appropriate, audit, but when I go for effective permissions I'm grayed out. I've tried different users (me as an administrator, the directors, anonymous system) does not. I managed to backup the drive on my computer, but I can't access the files when I get back. I was able to run my antivirus program and it found 2 viruses it says that she deleted. I tried to plug the hard drive into his machine, but nothing has changed. I tried to access the files he wants from the recovery console, but was denied access.

  His family has a lot of pic and doc that are important to them, so I try everything short of a clean reinstall, and I'm at the end of the roll. Any suggestions would be greatly appreciated.

  Hello Bubba Doug,

  Sorry you are having this problem!  In addition to LNG. Ladislav Cermak, I've added a link below where another user was having this problem.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/access-denied-when-trying-to-take-ownership-of-an/0778dc1c-417D-4536-AA07-2f4bef614914

• How to disable the mouse pad scroll feature?

  A crossed the features Control Panel and I am unable to turn off this feature

  Most of the keys are now equipped with software designed to have the side right of the touch pad scroll top and bottom of the page and the left to zoom in and out of the page.
  In most cases, if you click Start > Control Panel > mouse, there should be a tab of brand such as Dell Touchpad. In addition, you can find a touchpad icon in the taskbar (next to the clock in the lower right corner of the screen). Right click and open this icon should help you in the right direction.
  The process to change these settings varies depending on the laptop and may require a phone call to the manufacturer for assistance.
  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse stops working but left and right buttons still work.

  I'm having a problem with my mouse, the cursor will stop working, but all buttons still work. I tried another mouse, uninstall and reinstall the mouse driver updated and change USB ports, so it is not automatically turned off. Nothing works I found so far.

  I found something here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-64-bit-mouse-pointer-not-moving-but/fc581ad9-87ac-410e-a7ae-55ffcf626f03?db=5

• The noise stopped working on Satellite P100

  The noise stopped working.
  Toshiba diagnosis explains his failure, but after all the rest is good, any ideas?

  Hello

  That said the State of the sound card in Device Manager?
  You don't see any yellow exclamation?

  Have you tried to update (restore) audio driver?

  Have you checked if the 'secret' was not enabled?

  You hear something using the headset?

  Please check these simple steps, and view the results.

• The mouse stop working after the installation of updates

  Have Windows Vista on laptop. Important Windows Update installed today. Have not installed the optional updates. Restarted the computer. The mouse no longer works. Control Panel - mouse shows only Synaptics touchpad installed.  How to operate the mouse?

  Hello

  1. what day you're talking about?

  2. What is the brand and model of the mouse?

  3 have you tried any other mouse to connect to the computer of the question?

  4. have you tried to connect the mouse to any other computer?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to update the drivers mouse and chipset and check if it works very well.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Click of the mouse stops working after you start the first application

  Hard to explain this problem.  First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere.  Accentuates not delayed anything either.  But when I press ctrl-alt-delete, move the arrow down to start the Task Manager and click here, then click Start to work and things get even once highlighted and everything seems normal.  HP Pavilion dv9000t Vista Home Premium 32-bit Intel Core 2 duo, 2 GHz, 2GBDDR, this is going on for about 6 months now.  I just noticed, I installed a trackball logitek, and after installation, it does the same thing.

  Hello

  ·         What is the brand and model of the computer or the mouse?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to run the Microsoft fixit from link and check mentioned below.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.