The Nickelodeon Sponge Bob maze approx. print HELP!

Similar Questions

• I can't get the labels to print an entire page of the same label he will only print four. Help

  I try to print a full page of labels, all the same. I did in the past, but now it will only print 4. How can I get to print an entire page?

  Thank you for your help.

  Hello

  1. What is the brand and model of your printer?

  2. what applications printer do you use?

  I suggest you to change the print settings and check if the problem persists:

  Reference: To set the properties of the printer

  Hope the helps of information.

• Printers / HP Photosmart 5520: my printer asked a password am not able to find the password or reset an another pls help

  my printer was asking a password am not able to find the password or reset an another pls help

  I've used it since December when I bought the printer, but I just changemy internet company

  It was when he said ask for password which i don't remember not pls help.

  I can be paid to [personal information deleted]

  Hi @funmi09

  I want to help you set up your printer for your internet company recently changed. This document provides the steps necessary to find the WEP key or WPA or your wireless network password.

  Once you retrieve your password, the following will help you to configure the printer; Connection of the printer after you have changed your wireless network.

  If you still can't find your password, you will need to contact your ISP (internet service provider).

  I hope this helps.

• I have a jrl system plotter/printer and driver for windows 98, but my new windows xp will not see the tracer. I used add printer/fax to install, but when the final 'Finish', he could not install. Help, please

  I have an old windows 98 are dedicated to this plotter and it work fine until we have upgraded to the new machine with windows xp.

  Hello Dzuco,

  Thank you for your message.  You will need get a driver xp for printer/plotter.  Pilots are produced by the manufacturer and are usually downloaded from their Web site, however, I can't seem to find anything online to JRL Systems.  I recommend you contact JRL systems for the suitable driver for your printer.  You also have the option to search the Web for 'plotter jrl systems printer driver.  Don't forget that some 3rd party software can contain viruses and malware, so take precautions by downloading and installing the 3rd party software.
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I want the date and time to stop printing on the bottom of my print outs

  The date and time printed at the bottom of print all. It doesn't matter if it's Firefox, IE, my emails, or even a word document. I tried to remove the header/footer, but because it prints on everything and everything I print, I think it might be a desktop definition...? I am running Windows 7. Help, please.

  Can go you to your devices and printers on your Start Menu and check your settings in your printer? You're right, it could simply be that a bizarre is activated he forced a timestamp on all your printing.

• 2 of the 3 computers suddenly can't print on network 6500 e709

  I have three computers and domestic an OfficeJet 6500 e709 on my local network.  Everything worked well for several months until today.  Today, cannot print my two Win7 machines, but my Vista machine can still.

  I went through the center of Solution any sequence of troubleshooting and nothing fixed it.  So I tried my own diagnosis, as follows.

  Because apparently, this forum does not accept attachments, I refer you to the numbered screenshots I posted to http://winter.webfactional.com/HP-problem.doc

  1. printing of each application, I tried, I get "unable to print document."  Most said that the center of Solution is that it is due to "a mistake in the printing system."

  2. starting at the HP Toolbox on the same computer, print a test page.  This method works.  It turns out that there is a connection between the computer and the printer.  The printed test page shows "network status: Ready ', and everything else in the report seems normal.

  3. I go to the window of the printer for this printer, cancel printing failed, view the Properties window and click on "Print Test Page"...

  4.. .and see it immediately.  However, nothing comes of the printer and as little seconds later...

  5... .my screen looks like this.

  ~ Thanks in advance for your help

  ~ Ken

  Thanks, MusicMan ~.

  It happens that my two computers are print again with success.  I don't quite know what solves the problem, and I have no idea why the problem arose in the first place, after a few years a print without problem with this Setup.

  For whatever light it can cast for others (and for me if it happens again), here's the rest of the story:

  After exhausting all the troubleshooting procedures that I could find (including flashes of heat-queue and reboot), I posted my call for help here, turned off my computer and went to bed.  The next day, after having turned all back on again, I noticed that a printer test page appeared in my output tray on the printer, and that he had been sent to one of my computers previously defective, I'll call the "desktop".  As stated in my initial post, printing a test page had been impossible before.  Then, I checked the office by printing a document.  That worked well, and the Office has worked since.

  Then I checked my other computer, the "laptop", and unfortunately it still couldn't print.  Looking for differences between the two configurations, I noticed that the center of complete Solution has been installed on the desktop but not on laptop - laptop has had only the drivers.  So I took to install the Solution Center.  Long story short, the installation process is not well, when the printer is already recognized by Windows and the drivers are already there.  So I finished unistalling the printer and then installed solutions and here Center on the laptop very well printed.

  I hope this helps.

• Want 4520: Cancelled the subscription to instant ink but printer still wants to connect to it

  I cancelled my instant subscription of ink. I also decided to use my printer with a cable.

  Whenever I try to print something now, the software wants to connect so I can use the instant service of ink. I can only print when you click several dialog boxes.

  I want to just a regular old printer connected to my laptop via a cable. How do I convince them what to do?

  Thank you for your help,

  Sabia

  Hi @Sabia,

  I recommend instant contact of ink with 1-855-785-2777. They will be able to provide with support in real-time to rectify everything explain related issues.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?

  Kodak ESPC310 + 0365 and Sony Vaio, printing problem

  Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?

  Hello

  ·         What operating system do you use?

  ·         Remember to proceed with changes in hardware or software on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the fixit tool and check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Follow the steps in troubleshooting section and check if that helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

   

  http://support.en.kodak.com/app/answers/detail/A_ID/19500/selected/true

   

  http://support.en.kodak.com/app/answers/detail/A_ID/1329/selected/true

• Windows live mail, I am unable to print the content of the mail, although attachments can be printed.

  I use windows live mail, for the past few weeks, I can't print the content of the mail, although the address and attachments may be printed but the content may not be printed.

  Only the accessories are being printed.

  Please help me, how can we overcome this problem to them.

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• my jet hp 5740 desktop prints only the first two lines and stop printing. Why?

  After opening documents and viewing, the printer only prints the title of the document.

  Hi John,.

  1. what operating system do you use?

  2. don't you make changes to the computer before the show?

  3. this happens with a particular application?

  Method 1: follow the steps described in the links below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab02

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2: Download and install drivers from the link provided below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=357202&LC=en&cc=us&DLC=en&lang=en&cc=us

  Hope it will be useful.

• Rollers which collects the paper in my Photosmart C5280 printer make any movement.

  I have cleaned the rollers, checked the settings, changed the paper, dusted off the printer, but rolls that are supposed for the paper do not move, and the printer gives me a message 'Out of Paper' and do not print.  Any suggestions?  He is an all-in one Photosmart C5280, running on Windows XP, directly connected to the computer.

  If the entry of paper rolls do not move, then it is possible there is something stuck in it or the sensors that control are having a problem.

  * I start by remove all paper from the paper tray and check at the front and the back of the printer to make sure nothing is caught in the rollers

  * Hard Reset the printer by unplugging the unit while it is turned on, wait 30 seconds and plug it back to.

  Thus, there is a document provided by HP with the steps to resolve when a printer does not have paper in the unit.  The document can be accessed here.

  I hope this helps.

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• my printer keeps printing a previous page all the time so page is double printed

  my printer keeps printing a previous page that all the time so page is double printed, so essentially 2 info pages are printed on one page. How can I erase the old off page

  keep a few pages print themselves with my new job, so I can't read my new job, because he has an old page of work prined. If I call this double printing. or ovwerlap of print. How can I stop, is a previous job stuck in the qque. Help me

  Hi dax222,

  · What is the number and model of the printer?

  · This happens with all the application you are trying to print from?

  · What is the service pack installed on your computer?

  You can follow the steps in the below link to cancel printing or to delete a print job that is stuck in the print queue in Windows XP: http://support.microsoft.com/gp/pc_print_introductiontocanc

  Link for reference: resources for the resolution of the printer in Windows XP problems:http://support.microsoft.com/kb/308028

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  I need help please

  If it is printed in white on white paper how you see it?

  Check your printers settings in his program in place.

• HP Office Jet Pro 8500 A: printer refuses to send photos to the computer. He wants to print.

  I have a HP Officejet Pro 8500 has.  I use the sd card reader to upload my pictures on the desktop.  As soon as I inserted the card, the printer would automatically open on the screen and ask me if I want to view, analyze everything first, or whatever.  Suddenly, he stopped to do all this.  Now as soon as I insert the card, the printer asks me if I want to view & print, create or reprint.  It will not send the photos on the card to the computer.

  That's happened?  How can I get this back to the way it was?

  Thank you

  Glory

  Hi @glory281 ,

  I see that you have problems to download the pictures from the SD card to the computer. I would like to help you today.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If you have another SD card, try it also, just to rule out the SD card.

  Power cycle the router, restart the computer and the printer.

  Try to download the photos again.

  Update the firmware of the printer, if you still have problems. HP Officejet Pro Firmware.

  I would also download and run the printing and scanning doctor. It will diagnose the problem and could solve it automatically. http://www.HP.com/go/tools

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Have a great day!
  Thank you.