Then print error in the spooler (0x000006be)

Similar Questions

• Error in the Spooler subsystem App 0x000006ba

  Found this same problem on answers back in 2010.

  My OS is Windows Vista Ultimate 64.

  Do not have this problem in the 2 years of the life of this PC.

  Try printing and Spooler subsystem App error 0x000006ba. Error of Job Status window Interface also.

  Worked on the resolution of this problem for more than 7 days.

  The Lexmark printer is connected to the wireless router.

  PC n ° 1 with this problem is connected to a Lexmark printer by USB and to the router by cable.

  PC #2 is connected to the router via cable and can print on Lexmark without any problem.

  PC #3 and #4 PC is wireless to the router and can print on Lexmark without any problem.

  I have uninstalled and installed the software Lexmark times more than I can count. After the uninstallation ran I used search and remove related files from Lexmark.

  All PC #1 and Lexmark drivers are up-to-date.  Latest firmware in the Lexmark. I restored the factory default Lexmark printer.

  All Windows updates have been checked twice a day and all the new updates installed.

  I ran difficulty he printer Microsoft and test files. Test the printer shows no problems spooler.  File test found problems once, then no more after that.

  The Lexmark printer icon sometimes disappears from the printer configuration Page.

  After the attempt to print and get the spooler error, the printer indicates a job pending.  I can not cancel this job and it connects the printer so that other computers can not print with current work on PC #1.  Sometimes I stop PC #1 pending work disappeared. Other times, he is not missing.

  I searched the web looking for a solution and all Microsoft. Nothing works.

  Heeelllllllpppppp!

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Check with Lexmark Support and drivers

  Lexmark - Support
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  Lexmark - drivers
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When I complete and sign a form and then print it out, the form data does not print.

  When I complete and sign a form and then print it out, the form data does not print. The form fields are empty with the exception of any signature.

  Thank you. Depending on your answer, I have compiled a procedure:

  Fill & sign a form in Adobe CD and print the form fields:

  (1) open the document.

  (2) click on tools - prepare the form. All fields are displayed in a vertical list in the bottom right of the screen.

  3) click on the first field in the list, scroll to the bottom of the list and shift-click to select all.

  4) click on the first field in the document, make a right click, select Properties.

  (5) on the general tab, uncheck the box locked in the lower left corner. Under field properties common form, select Visible and uncheck the read-only box, close.

  (6) print out and save the file.

  Note: even if you select all the fields in the document in step 3, this procedure may work for the fields on page 1. In this case, repeat steps 3 through 5 for each subsequent page.

• Difficulties of the printer. Get the spooler error messages.

  I need help.  I've been on this forum yesterday looking for answers and tried a number of things.  I'll detail what I tried and which responds, I received the computer.  Let me preface this by saying that this all started yesterday.  My computer slowed and then frozen Friday.  A friend who fixes computers because his life has come and picked up the computer and he told me that he had to fix something to do with the "boot device", apparently it was not properly start.  Reconnecting to my pc, I discovered that I could print is no longer.  That's where I start...
  1 Control Panel > printers & faxes > add a printer: when I do this I get an error msg that says: "operation could not be performed.  Printer Spooler service is not running. "so...
  2. on the start menu, click Run > type "services.msc" > right click on "Printer Spooler" > click "Properties" > on the general tab, startup says "automatic" and «Stopped» Service status  Click on 'Start' and get the error message "cannot start the spooler on Local computer printing.  Error 2: the system could not find the specified file. "so now...
  3. I went to the printer spooler properties, in the Services menu > on the Dependencies tab, "this service depends on the following system components: Remote Procedure Call (RPC)" and "following system components depend on this service: Dell Printer Status Watcher."  So in the services menu, I checked the remote procedure call and it is started.
  4. to the printer spooler properties, connection tab, the box marked "Local System account" is selected, and below "allow service to interact with desktop" is checked.  Further down on this tab, hardware profile reads 'active service '.
  5. after having tried everything I removed/uninstalled all by clicking Control Panel printer drivers > Add / Remove Programs > then remove all applications the range of HP printers.  Then, I went to the HP Web site and installed the printer drivers all over again and restarted my computer.

  Unfortunately, after all that... you guessed it... I still cannot add a printer or print at all!  I'm at my wit's end!  Help if you can, please!
  Do not leave the silly red hair... There's a smart chick under here!  Thanks for any help you can give.
  Melissa

  If the steps in the KB article look too intimidating and/or automated FixIt tool does not work, read the material in the CleanPrinterDrivers link below.  A single step, that you missed to uninstall your printer drivers is 'Step 4' of the Article a link below.  If I understand correctly, if you omit this step, the same driver file is used to reinstall, even if you have downloaded a new version.

  Here is my canned response:

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• All printing errors in the queue for a shared printer

  I have a HP6110 connected to an XP machine.  It is shared and the printer is installed on a computer vista laptop.  I could print however now each job is in the queue and then goes into an error state.  The only way I can remove the task from the queue is to restart the print spooler.

  How can I fix once and for all?

  Well, I never aspired to be certified MCSE on NT than a few computers existing except in places like Bletchley Park to crack the enigma code messages .

  Deleting the files in the folder is at the heart of the fixing of the problem if my hypothesis about your problem is correct. The problem is one of the frequently reported printer problems.

  Don't forget to tell me the version of Adobe Reader, you?

• Cannot print: error in the kernal 32.dll library?

  Original title: unable to print from computer but able to print from the Internet error: entry point Disble Thread library called could not be located in the core of library links 32.dll dynamics.

  I can print from the internet, but not my machine.

  OT: Get error message; "Disble library thread calls the entry point not found in the dynamic link library kernel 32. dll" he is first asked to print an Excel document

  I have now resolved the issue.  It seemed to come from the Adobe Reader. It has been uninstalled and reinstalled and it seems to have solved the problem.  Thanks for your help anyway.

• How do I insert additional pictures in a folder that were not captured by the same device or are updated the postcards and then print them on the record

  How can I insert additional pictures to their appropriate location in a folder? These additional photos are either copies of postcards or changed pictures from another camera and do not show any information regarding taken. I moved their positions right left click and drag , but when I try to burn such displayed (using the Nero essentials as a data disc) , all additional photos appear at the end the slide show and not as stated on my computer.

  I tried different ways in VIEW, but without success. Please help!

  Hello

  You can try to rename the pictures in the sequence number and see if it helps.

  If the problem persists, you can contact the Nero Support.

  http://www.Nero.com/enu/support.html

• Connect to the printer error code 'the operation failed with error 0x0000000a.

  not abe to have student access network printers

  Run this fix it.

  http://support.Microsoft.com/mats/printing_problems/en-us

  mohanad

• Canon MP700 and Windows 7 printer error

  I just installed a desktop computer Dell XPS 8500 with Windows 7. I have connected my Canon MP700 who worked with my old computer. When I try to print I just get a dialog box with "collecting printer status" and nothing prints. My document shows a printing error in the print queue. I downloaded and installed the 64 bit Windows 7 printer driver for my MP700.

  Hi Garry,

  This problem can occur because the printer settings.

  Try the following and see if it helps.

  
  Method 1:

   

  Restart the print spooler device:

  a. click Start, select Control Paneland then click on Administrative Tools.

  b. double-click on Services.

  c. in the user account control window, click on continue.

  d. click on print spooler.

  e. click stop to stop the print spooler.

  f. click Start to restart the print spooler.

  g. click on OK.

  h. restart the computer and check if it helps.

  
  Method 2:

  Refer to the steps in the following Microsoft article.

  Why can I not print?

  Solve printer problems

  Keep us informed on the status of the issue.

• Documents appear suspended in the spooler.

  When printing, all documents for all printers show paused in the spooler on Vista PC.

  Need to go in the spooler and return the documents to print.

  Vista 32 SP2 and HP and Epson printers running.

  Removed all of the printers 'Printers' in Vista, re-installed Epson printer.

  Downloaded new drivers for the printer.

  Epson is connected to the network via a wireless connection to the router.

  Printing from Windows 7 PC print immediately. (No Documents suspended in the spooler on this machine).

  Looked for a setting 'Pause all print jobs in the spooler' but cannot find any setting in the printer software.

  Is there a setting for the spooler somewhere that I can put to allow printing immediately?

  Thanks rod

  Thank you for the information. Method 1, printer was not suspended.

  Method 2, interesting... After I stopped and started the spooler, I could print without pauseing Wordpad document, but when I closed and open WordPad and tried to print again, the document could be suspended.

  Method 3 I deleted the printer on PC problem then ran Fixit, then added to the printer, open WordPad, and tried to print again, the document could be suspended. I restarted the PC, but this time, I noticed a message Windows Popup on Equitrac Document Routing Engine has stopped working. This doesn't sound good and I thought it was related to printing so I set up the motor to take no action to anything he was trying to do. Now, I can print without the document being suspended.

  I need to go through a bunch of tests more, but if everything ok after Tuesday, I consider it fixed.

  Thank you

  Hello

  Thank you very much for this information. If the problem persists after the tests, please read back to us so that we can help you solve this problem.

• How to fix "Printer error state" win8 / win8.1 (late printing) looks like all hp printers to still occur.

  This takes place too may long to count. Impression of Windows 8 and 8.1 works 85% of the time but time hp office then "printer error state" 8600 pro.

  See these same problem. Uninstall is just a miracle same problem will return. Looks like that happens at expiration, then the pop-up message. He wants to cancel printing. I just put and wait (X) the box pop up. Soon the print job comes into play. It is trouble of software product. Not HP readers or hp software. I tried may fix. I just cleaned up PC to format min. installed programs is the same as the old hard drive full of junk.

  Hi Tony,.

  Please contact Microsoft Community.

  This problem may occur if one or more are true.

  • No more paper.
  • Print the door is open.
  • Course of Toner.
  • Paper Jam.
  • In offline mode.
  • Hot Bus error.

  I suggest you to follow the instructions below and check if it helps.

  1. Make sure that the HP printer cables are connected properly. If in doubt, turn the printer off, unplug the unit and unplug all cables from the printer. Plug it back and reconnect the cables. Turn the printer back on to see if the error is cleared.
  2. Check the HP printers cartridges and printheads to ensure that they are properly installed. See also if the cartridges are empty. If the ink cartridges have ink, reinstall the cartridges and print heads. If the cartridge is empty, replace it with a new one.
  3. Make sure that the HP printer software is installed correctly. If the device does not respond when you try to print or printing software will not initialize, uninstall and reinstall the HP printing software. Refer to HP Officejet Pro Full Feature software and driver.
  4. Clean and align the cartridges of printers. Open the software for your HP printer or HP solutions Center to access these features of maintenance.

  We answer with the result, then we can help you further.

• Windows cannot add printer print spooler service is not running. Even after the spooler service is started I get code error 0x000006be

  I have XPS from Dell with Windows Vista Home premium 32-bit. I'm trying to connect the office jet J4680 HP wireless printer. The printer was working with this PC, but for the last 2 weeks, something has changed and I can't reconnect to the printer. I get the error Printer Spooler service is not running. After I have start the spooler service and try to add a printer, I get an error 0x000006be code

  Hello

  The main problem is caused by corrupted printer drivers, you will need to check with your printer manufacturer for
  Download the latest drivers (just re - install the old ones will probably lead to this error). Make sure that you
  Download for your version of Windows and 32 bit or 65.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
  http://support.Microsoft.com/kb/946394

  ==========================================

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest version of the driver).

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread - stop and disable the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If no joy:

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Spooler subsystem app error message when you try to print. then my computer launches the printer offline

  I tried to delete all software, including drivers and then reinstall but have had absolutely no success. I should mention that I use a Lexmark printer and supposedly there are hidden drivers files that cannot be deleted. Any help would be appreciated

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Check with Lexmark Support and drivers

  Lexmark - Support
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  Lexmark - drivers
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.