The path to the silverligh.msi file is not found. Help

Similar Questions

• MSI file is not found

  When I install wi - fi drivers in my laptop, it displays an error of MSI file is not found, but in the system32 folder, I can see the file, msi.dll, without this error, I can't move forward the attachment plant...
  ... I tried many things to fix it, but I can't found the reason for this... Now, I'm tired of error correction in windows 8... (Thinking to switch to windows 7 new...)

  Try this

• External BB10 Webworks/Cordova opening HTML pages on the device: "this file is not found. Check the URL and try again. »

  Hello fellow people,.

  IM quite in my application of Cordova/Webworks which downloads and save an html file in the SD (blackberry.io.sharedFolder).

  At this point, the config.xml file is defined as:

  read_device_identifying_informationermit >

  access_sharedermit >

  ermissions >

  Now, I'm trying to open the downloaded html that is saved to file:

  /Accounts/1000/removable/SDCard/MainFolder/subfolder/file.html

  My webapp, I try to open as: window.open (path, _self);

  Where path is the file above (which exists on the device!)

  Path is also, with the blackberry.io.SharedFolder + "/ MainFolder/SubFolder/file.html".< of="" that="">

  Also, I get the error:

  This file is not found. Check the URL and try again. If the URL is correct, check that your card is correctly inserted on your device.

  I am running and development off the BB10 Simulator.

  The console does not throw any error that I see.

  Any help or advice would be appreciated.

  See you soon,.

  @varunasingh

  Well, this is awkward.

  I have myself fixed by adding the string: "file://" on my road.

  I hope that others see it until they are too uptight.

  This has been resolved. Thanks for reading.

• Why the beats start file is not found on my TouchSmart 320-1050?

  I have a 320-1050 Touchsmart from HP with Windows 7 64 bit operating system.  When I try to open the software of beats, I get an error message saying that the boot file is not found.  I have not made any changes to my computer and that you have not added new programs.

  Hello Shirley,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56045.exe

  One time finished, open windows control panel, open programs and features, locate the Audio IDT entry, right click and select uninstall.

  When this has completed, restart the computer.

  Let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• The fcpcmcia.sys file is not found on a Portege M200

  Hello

  Someone at - he never understand the problem "the file fcpcmcia.sys is not found"? I saw in another post, but suggestions does not solve it and the post has been locked while I couldn't answer.

  I have a Toshiba Portege M200, who has the same problem when I try to put in Windows XP Tablet PC edition 2005 level. I used the recovery CD to return to XP Tablet PC edition (because the previous installation was messed up) and then tried to launch the installation of Windows from a couple different XP Tablet PC 2005 CD that I got from MSDN.

  When I try to reboot when the installation program tells me to do, he runs the Windows Installer, but it quickly fails with the "the file fcpcmcia.sys is not found." She did not mention a location where the file is supposed to be. I can't get into Windows XP Tablet PC (first edition) very well and I see there are 3 files fcpcmcia.sys hard disk.

  Any ideas? I have to upgrade this Tablet PC for the 2005 edition, because some software I need to run demands it. I tried to reinstall the fcpcmcia.sys (drivers FreeCom) but that did not help.

  The CD player I use is a Targus slimline CD-ROM/DVD-ROM (PCMCIA, USB not) which is recommended by Toshiba on their Web site.

  Thank you

  Bob

  Hello

  It is difficult to say why this message.
  The problem is that you have installed the OS of the original note Toshiba recovery CD.
  On the page of the Toshiba driver I found the cardbus driver. Maybe you need this driver?

  Usually if you install the new operating system, you must install the correct drivers Toshiba in the right order. The chipset utility, cardbus, common modules driver are very important and must be installed first.

• HP OfficeJet 4500 Wireless: lack the hpsupportsolutionsframework.msi file may not install/uninstall

  I got caught by the Windows default update from 7 to 10.

  10 was a little bug, but I gave him a few weeks to see if it could be arranged.

  Yesterday, I got a notice from HP that I needed to upgrade my printer software, so I did, which was my mistake, it seems.

  The upgrade process didn't go smoothly and in the end, I had no way to access my printer/scanner, the HP solution Center which I use to make my scanner was gone.

  It's been half a day trying to solve this problem, including downgrading to Windows 7 and to uninstall and reinstall the printer software, but nothing works.

  A critical issue seems to be an error message I get that said file hpsupportsolutionsframework.msi is missing from the temp/local directory.

  So, how do you return this file?

  At this point, I'm pretty disappointed with HP, because I just followed the advice you guys to make a necessary upgrade.  everything worked fine before this.

  Hey @Hermitaño

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the software for your Officejet 4500 Wireless all-in-One Printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Click Start and in the bar look in %Temp%, and then press ENTER.
  2. In this folder, find the folder whose name starts with 7Z.
  3. Open the folder util/ccc.
  4. Run L3_uninstall.bat.
  5. Restart your PC.
  6. Download and install the latest drivers for your printer by clicking on this link.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I have a Kodak ESP 3250 printer and guard appearing the following message "the user interface file is not found (Code: 101-8200)"

  Tried the solutions suggested in the windows click here for more information, but does not. The programs seem to work but cannot get rid of the message. Thank you.

  Windows 7 operating system

  Hi Michael,

  1. don't you make changes to the computer before this problem?

  2. What are all the steps you have done?

  3. when exactly you get this message?

  Follow these methods.

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  We can refer to this article and check if that helps.

  Error: "the UI file is missing" (code 101-8200): http://support.en.kodak.ca/app/answers/detail/a_id/31863/selected/true

  Let us know if you need help with this question, we will be happy to offer you our help.

• Miss me the "messenger.msi" file where I can download it or fix it?

  I have problems to install the new version of Windows Live messenger because it's impossible to find the "Messenger.msi" file in my computer. I need to know if there is a way to download the file or fix it so I can upgrade to Windows Live Messenger.

  Any help will be appreciated.

  Thank you

  Try:

  http://explore.live.com

• Incompatible program, the .msi file is not running

  I try to install a program on my new 64-bit Sony Vaio, by using the .msi file that I got with the program provider.

  It has worked great on my Dell E6400 previos.
  Error information: "the Installation ended prematurely because of an error".

  When program compatibility testing, I get the 'Incompatible program' output.

  According to the manufacturer of only the. MSI.file runs on 64-bit machines of "all other computers" including.
  The problem seems to occur only on my PC...

  Any suggestion on what to do?

  Thank you and best regards,
  Sten B

  Hi Sten,

  This error can usually be resolved by emptying the temp folder.

  Method 1: Delete the contents of the Temp folder and check if that helps.

  a: Click on Start > run

  b: Type folder , and press ENTER.

  c: Now remove everything inside this folder.

  Method 2: Run the Fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  Good day!

  Get back to us if you are having problems.

  Hi Jessen,

  Thank you for your answer!
  I tried, but it did not help.
  However, the solution that my local Consultant of the PC came with was 'no GUI', he turned off the GUI (for as far as I understand). In my view, that it changed the .msi file by adding this command.
  Best regards
  Sten.

• Unable to play the song in iTunes. Get a msg "original file is not found, you want to locate.

  Unable to play the song in iTunes.  When I double click on a song title, I get a msg "original file could not be found is located."  You want to locate? I click on locate, it then takes me to the music library folder that displays a list of the itunes library by date files.  If I click on one, it then brings back me to my list of songs.  I then double click on the song, and then get the msg "original msg was not found.  I can play the song in my folder to \My eMusic.  I think he's using Windows Media Player to play the song out of this folder.  Any help would be appreciated.

  Update: after a lot of research and trial and error efforts, I solved the problem.  For reasons unknown, the songs have an incorrect file path.  Will change the path on each song.

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• I get the error message "a license is required to play the selected song or video. However, a license for this file is not found, has expired or has been altered"while trying to play a downloaded song

  Original title: Media Player

  Yesterday, I downloaded a song.  Now my Windows Media Player will not play anything.

  I get the same room whenever I try to start each song in my library:

  Media usage rights acquisition

  wmasf.MusicNet.com

  A license is required to play the selected song or video.  However, a license for this file is not found, has expired or has been altered.  To obtain a license for this content, please visit the website or open the software application in which the file was uploaded originally.  You need to connect or buy the song or the video.

  I ran several diagnostic, and remedial programs, but nothing worked to get media player to work (without getting this popup Media Player and stop).

  It seems to be a kind of malware that has damaged something in my windows media player.  When I put "wmasf.musicnet.com" in the address line on explore, I get only the same message as the pop-up.

  Anyone know how I can fix the media player and get rid of this problem?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooters in Windows Media Player and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Open the troubleshooter in the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Try to reset the management of digital rights (DRM) and check if it helps.

  Follow the steps to reset the DRM:

  1. first of all, check that the hidden files and folders option is enabled.
  To do this, follow these steps:

  a. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.

  b. click on organize, and then click folder and Search Options.

  c. click on the view tab.

  d. click Advanced settings.

  e. under hidden files and folders, click Show files and folders, clear the Hide protected operating system files (recommended) box and then click OK.

  2. Locate the DRM folder on the computer.
  In general, the DRM folder is located in the following location.
  Note In these paths, drive represents the drive on which Windows is installed.
  Windows 7 or Windows Vista.

  a. Windows 7 or Windows Vista versions x 86-based
  drive: \ProgramData\Microsoft\Windows\DRM

  b. Windows 7 or Windows Vista versions x 64-based
  drive: \ProgramData\Microsoft\Windows\DRM

  3 Rename the file DRM DRMbackup.

  a. right click on the DRM folder and then click Rename.

  b. type DRMbackup, and then press ENTER.

  c. close Windows Explorer.

  Warning: You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.

  For more information, see the following Microsoft article.

  The Player Windows Media DRM: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions

  Hope the information is useful.

• "Cannot save...". "Acces\nom... K:\File because the file is not found.

  I came home from a trip to the beach. Downloaded .jpg photos and started editing them. When I try of "save under" [for example, 100 - 5600.jpg as 100 - 5600.jpg] I get "cannot save...". "Acces\nom... K:\File because the file is not found!" If I try to save it in another format, such as .tif it will track fine. Then, if I try to save as 100-5600 a.tif, it gives me the same thing - "can not save...". "Acces\nom... K:\File because the file is not found!"

  So - any suggestions?

  captreed

  Just saw your screen capture.  Note that the name displayed in the dialog box under account ^ ^ ^ characters in there as your actual path.

  Now, I firmly believe that the special characters are what are causing your problems.

  Rename the different folders in your path to remove these characters and you should be fine.

  -Christmas

• The connection parameters file could not be found

  Hello
  
  I get the message "the connection parameters file could not be found" every time I try to access my local dbisqlc.exe sybase database. I work with Sebel 78 and I entered as a settings my login, my password and the path to the .dbf file.
  
  Could someone please advise?
  
  Thank you

  Hello

  Try to specify the ODBC Data Source [create an ODBC connection] and specify the Data Source file (.) DSN) connection (dbisqlc.exe) tab under

  Section "select an ODBC data source to complete the connection parameters".

  It will be useful.

  Kind regards
  Joseph