The phone contains updated the software cannot be updated. Any solution?

Similar Questions

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php

• I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be raised

  I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be found on the system.  It seems that the program PageMaker 7 which is not on the new computer.  How can I load my InDesign CS5.5 on the new computer laptop?

  If you purchased InDesign CS5.5 as an upgrade then it looks like it's showing that you need to provide information about the old version where you improved since he found nothing that qualifies.  You must only choose the old version and serial number.  (I don't know anything about InDesign, nor how it might relate to PageMaker).

• Just upgraded to El Carlos Moreira of 10.6.8 on my imac. Using 1.5 photos, many are torn to pieces, especially the big raw files. Any solution?

  Just upgraded to El Carlos Moreira of 10.6.8 on my imac (2010). With the help of pictures 1.5, many are shredded, especially the big raw files. Any solution?

  Select one miniature pixelation and try, if reprocessing RAW format will help.  The last RAW support update that you have installed with the upgrade may have changed you the treatment for your camera RAW format.

  To reprocess the file open RAW image in edit mode and use the command "Image > reprocess RAW."  Does return correct thumbnail?

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 5110 printer wireless but the software cannot see the IP address

  Hello. I have a new printer Photosmart 5110. I turned on and it found my wireless network. I entered the key wireless and got an IP 192.168.1.68 and connected is displayed.

  I have an ASUS Netbook. It doesn't have a CD player, so I had to download the HP Photosmart installation software. I am running XP. When I run the installer, it asks if I have a printer connected wireless network. I enter the IP address and the message says printer not found.

  I use a BT Home Hub. When I log on the hub I see the printer and IP address.

  I can ping the IP address of the laptop.

  I can access the printer directly using Internet Explorer and entering the printer IP address - and I can print a test page with success.

  I have Norton Security and I turned off the firewall.

  I can't get the installation software to see the IP address of the printer.

  Don't you think that there is a problem with Norton blocking the IP (if so, how unlock) or something to the BT Hub?

  Can you help or give ideas I can try before I bring her to the store.

  Steve

  Hello Steveargy,

  you have the tray to run the network diagnostic utility? If this is not the case, can you please do?

  I hope this helps

  Best regards
  F.

• Cannot open "Firefox.app" because the identity of the sponsor cannot be confirmed: recommended solutions don't work... still can't open the download. Help?

  I tried the recommended two solutions to replace but none works. Firefox was slowly turning last night so I decided to update it. Did not help. Downloaded again, but now can't access it at all. I'm on a Mac using 10.9.5.

  If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

  Download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 41.0.1: https://www.mozilla.org/en-US/firefox/all/
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose personal data as favorites when you uninstall and (re) install or update Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I forgot the password cannot connect to any account

  Hello. Recently, my mother reset his password on his desk, and now she has forgotten. Can no longer be in the computer what so ever and are glued to the start screen. Is there a way we can change his password and enter into the computer?

  Thanks for your help!

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft information on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• 16 June updated blown all my documents for the last 10 days. Any solution?

  Documents for the last 10 days, all my email settings, all memory of recent activity disappeared.

  Hello Craig,.

  Let's see if the files are actually missing or if they are hidden:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Unhide-files-and-folders/ca46d3ba-1b51-E011-8dfc-68b599b31bf5

  Best regards

  Matthew_Ha

• BlackBerry Smartphones Got App error on my BB Bold yesterday - 603 reinstalled the software, but now Word to Go, sheet to go, Slide to Go all erased

  Help...

  I had a 2nd "App Error 603" on my BB Bold 9780 yesterday in 4 months.

  I have connected my phone to my laptop computer and re-installed the operation of the platform again on the phone.

  I had a lot of trouble getting the device software to recognize the handset, but looking at the forums, the advice was to remove the battery and re - connect the phone to the PC and try again by clicking on update.

  I did, but partly through the re-installation, I re inserted the battery in my phone.

  I began to get a pop-up box several times during the installation process saying that the software cannot be installed with an option to try again.

  I clicked retry each time and eventually completed the installation.

  I then restored the phone to a back-up I did 6 September since erased all re-setup.

  However, today, I see that all the games provided originally with the phone and applications Word to Go, sheet to go drag to Go have all disappeared.

  Now, when I want to view the file that I have previously saved on the media card, I get a message, the file cannot be opened.

  However, I was able to open this file before.

  Should I re-install the OS again?

  Would it be interruptions by inserting the battery that caused these applications to clear?

  I downloaded my CV on my phone and was able to view and edit before, so something went wrong during installation.

  Any advice welcome.

  See you soon,.

  Anna

  Anna, Yes, I would say that you back up your device with the BlackBerry Desktop Software and then wipe on it security (Options > Security > wipe Handheld).

  Then, install the latest operating system for this device.

  See the link below to download it and follow these simple instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  After the application loader is running, you will see a screen where you can click to install or not to install some applications on your BlackBerry. Make sure DocumentsToGo is checked to install.

• The software installation will not see a Media Hub on XP but on Vista.

  When I run the installation software on my desktop running XP, the software says that it cannot find the media center.  Gives error 107 but I can type the IP address and the browser will find and connect to it.  When I run the software on my laptop, running on Vista, it immediately finds the Media Hub and install the software.

  I've updated the Media Hub for the latest firmware, but that did not help.  Any advice on how I can get the software to install on my desktop?

  Summer reading another post in this Ant and found my answer.

  Another question...

  Hello

  I tried to run the installation and add another PC using the installation CD every time and regardless of the operating system PC and other settings of disabled security software can't find the device even if the device has one IP address and I can browse on it.

  I configured the device with out the CD installation and everything works fine, the only problem I have is the backup and media import software install because the software cannot find the device. Is there anyway that these applications can be installed individiually with using the CD? Linksys may provide for these applications separately?

  Thank you

  Answer...

  Yes you can. On the installation for the NMH CD, locate the file installation. RES (should be about 120 MB). You can extract this file using WINRAR, and once extracted, there will be some applications that you can install on your computer manually. Two of them are the backup tool (file name is backuptool.exe) and the Import tool (file name is LinksysTools.exe)

  You can try to do this method if you do not have the hub of media with you.

  Thank you Mared1784 for this...

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mini 210% of the battery cannot go > 75%

  Hello. I have a mini 210-2036TU for<2 months.="" i="" recently="" just="" noticed="" that="" my="" battery="" percentage="" indicator="" cannot="" go="" higher="" than="" 75%.="" last="" night="" i="" charged="" it="" while="" the="" notebook="" is="" turned="" off,="" and="" the="" charge="" light="" indicator="" (orange)="" was="" on.="" however="" in="" the="" next="" morning="" the="" charge="" light="" indicator="" still="" shows="" orange="" (as="" far="" as="" i="" know="" when="" the="" batt="" is="" fully="" charged="" the="" light="" indicator="" should="" turn="" blue).="" i="" did="" though="" update="" the="" bios="" recently="" to="" fix="" the="" missing="" home="" end="" pgup="" pgdn="" keys,="" but="" still="" not="" sure="" whether="" the="" bios="" update="" is="" the="" root="" cause="" of="" the="" battery="" charge="" issue.="" does="" anyone="" have="" the="" same="" experience,="" or="" know="" any="" solution="" to="">

  Problem solved by following these steps:

  1. Unplug the AC adapter / CC & remove the battery from the laptop
  2. Press the power button and hold for 60 seconds
  3. Plug the power adapter, put running the laptop and let windows start
  4. Leave it for 5 minutes then shut down windows
  5. When the laptop is turned off, insert the battery
  6. Turn the laptop computer, start Windows, and the battery indicator in the Windows taskbar should now display the battery level indication

• HP Officejet 6500 e710n-z principal: impossible to completely remove the software after the replacement of the HP Officejet 6500 printer

  I replaced my Officejet 6500 printer and removed the software using the 10 software removal tool windows.  The software has been removed, but a message appears everytime I start the computer saying that the software cannot find the 2 support files.  I can turn off the message and continue the start up, but it's still a nusiance that I would rather not deal with every time I start my computer.

  Hello

  Open Windows Explorer and type the following in the address bar:

  %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

  Remove the shortcut to "Monitor alerts ink" and restart your PC in order to ensure that the error no longer appears.

  Kind regards

  Shlomi