The reinstallation of Windows 8's own hard drive and SSD

Similar Questions

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

• After the reinstallation of Windows 7, it does not load and restarts continuously

  I recently formatted and reinstalled Windows 7 on my Sony Vaio PCG - 71913L LAPTOP however the operating system does not load and his bicycle at all times. From the time turned the first page initialization comes then it stops and restarts and continues to go through this cycle. Is there a soloution to this question

  Check your BIOS settings. Have you installed the drivers of Sony devices?

  Test your hard drive and memory.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no error then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Sony product support: http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=1, 72,70,24,66,9,26,5

  Sony device drivers: http://eSupport.Sony.com/en/VAIO

  Enter your model number or leave Sony scan and detect your model.

  If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, Audio, etc, and so on.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For help to install windows 7 on your VAIO, you can contact the support team Vaio 1-888-476-6972 they will be more than happy to try to help.

  J W Stuart: http://www.pagestart.com

• Can I transfer the license of windows 8 from a hard drive die on new hard drive?

  I have PC and windows license 8.

  A week before, the hard drive of my pc which contained the C drive was dead because bad sector.

  I want to buy the new hard drive and want to transfer the windows license 8 old hard drive.

  Is this possible?

  I read an article which is only possible if you format the old hardisk first.

  But in my case, I can't turn on my old hardisk to format.

  I have PC and windows license 8.

  A week before, the hard drive of my pc which contained the C drive was dead because bad sector.

  I want to buy the new hard drive and want to transfer the windows license 8 old hard drive.

  Is this possible?

  I read an article which is only possible if you format the old hardisk first.

  But in my case, I can't turn on my old hardisk to format.

  The OEM of Windows 8.0/8.1 license is related to the motherboard and not the hard drive, so you can reuse the new hard disk provided his will in the same computer.

  About the old drive you need not to worry about the formatting as the old disk can never be reused. If you want to be sure, you can physically break the old disk with a hammer before throwing.

  Use Windows 8.1 media tool on another PC to prepare Windows 8.1 with updated installation media 1:

  http://Windows.Microsoft.com/en-GB/Windows-8/create-reset-refresh-media

• HP TouchSmart 420 - 1000 t CTO: need help with the installation of windows on a new hard drive for HP TouchSmart 420-1000 t CTO (bought in 2012)

  My hard drive is failng in my computer I get the message that "the failure of hard drive" is imminent for several months now.  I did just recovery disks after I bought my computer and that you have ordered a new hard drive.

  I thought that the part of the setup of windows on a portion of the current hard disk that I need to replace.

  I want to just make sure that if I can restore the windows completely and that all programmes provided with the computer are on the recovery discs I want to do it myself - so I need to know I'm doing it correctly!

  Thank you very much.

  Kimberly

  PS I found this web page below and I want to just make sure that it applies to me:

  http://support.HP.com/us-en/product/HP-TouchSmart-420-1000-desktop-PC-series/5146292/model/5155758/d...

  This link in the post seems to apply to the situation.  If you have already completed the defined recovery disc then it should just be a matter of running the recovery disc after the new hard drive is installed.  The recovery disk set will be "restoring windows completely and all programs included with the computer".  Be aware that all other items that were installed or personal data will not be restored.  When replacing the hard drive, do not buy a disc exceeds the limit of 2 TB, such as published in the SPECS for TouchSmart 420-1000 t CTO.

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.

• How can you reactvate windows after changing a HARD drive and reinstall the operating system

  My hard drive crashed. I bought another HARD drive, installed, reinstalled windows. Windows is not enabled and does not except the key

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I need to display a corporate tutorial site which is only supported by Microsoft Windows.  Is it possible to load windows on an external hard drive and a MacBook to view the Web site?

  I need to post a tutorial for some training company corporate site only supports Microsoft Windows.  I'll buy a MacBook in the coming weeks when I go to training and I wonder if there is a way to load windows on an external drive and launch it on my MacBook?  I know you can use bootcamp, but I don't want to burn up that much of my Flash memory by placing it on the MacBook itself.  I have a 1 to Seagate that I use on my iMac at home for Time Machine.  Could just operate with Windows on it to visit the society tutorial with my MacBook?

  Boot Camp will not allow that.

  It is possible that one of the many emulators Windows for Mac can allow you to run with such a disk configuration.

• HP-au006tx: Hi, I bought the version au006tx of the laptop.can hp I spend my hard drive to ssd?

  Hi I bought the hp au006tx laptop.i want to upgrade my internal hdd to ssd.is my latop upgradable? I have

  Samsung 850 EVO 500 GB 2.5 inch SATA III internal SSD.is portable laptop.kindly answer me.my it compatible with my computer model is hp au006tx.it has 8 GB of ram, 1 TB hard drive, 4 gb nvidia 940mx graphics.i want to replace this 1 TB with 500 GB samsung hdd model ssd as mentioned above.tell me if my cell phone is compatible with this samsung 850 evo 2.5 inch sata III internal ssd 500gb.kindly answer me.

  Hello

  Yes you can. The simplest process is to clone the HARD existing SSD drive (same capacity or more is much simpler) and swap/replace.

  Kind regards.

• Installed new hard drive on laptop with Windows 7 can install Windows XP on external hard drive and plug it into USB?

  Original title: Win7 Pro + HD Ext different OS
  I just installed a new hard drive in my laptop with Windows 7 Pro 64 bit.
  Would it not be possible to install WIn XP or Win 98 + older software (Win 98 or XP) on an external hard drive, then plug it into USB, laptop, in order to run old programs of 16-32 bit?

  It would be best to run Windows 98 or XP in a Virtual Machine, if you need to run older programs.

  You can use a free software such as Oracle VirtualBox or VMware Player:

  Sunny Random Ramblings: installation of Windows 98 in Virtual Box

• Why HP only allow more big hard drives and SSD when restoring Images of original & software OS system?

  8.1 Windows recently damaged my PC h8-1559 (still under warranty). All was not if badly grown f11 empty blue screen and boot BSOD loop was the only thing besides the BIOS that I could see. I must have spent days trying to get Win 8 on my SSD after you purchase this month of PC. Now I have to restore PC to original specifications and again migrate the OS back to SSD. Not really a problem I expect no support, given how much anti-'customize' computers became under software and hardware developers who blame or place the responsibility on each other for the most part.

  I just want to know:

  That HP decided smaller HDD and SSD should never be allowed to use the pre-built PCs and why? More importantly, why has it remained for many years after many complaints over the years? Thank you.

  Hey Hastatus

  I can understand your frustration, but the smaller reader that works is 160 GB. The way the image is put on the disk and extended requires a lot of partitions and each of them is created to a certain height, these sizes were decided before the SSD, and when disk space was not that great, a case, but it was arbitrary. As SSD became more popular and used in some of our systems we made some special changes in plants in order to allow a 60 GB drive to use. But the changes were not made to any other builds, there was not only considered.

  As SSD became more popular, they are also grew in size, so the decision was made to leave the requirement of 160 GB. It's not a way to go back and change to the older, but we will spend this feedback to our engineering teams.

  Bottom line - usable - more small disk 160 GB regardless of the type (HDD or SSD).

  Sorry not information just solution.

  Bill

• In any case, I can install the update of Windows 10 strictly on a whole new SSD?

  I would like help to know the best way to deal with this, I have Windows 7 on my HARD drive and I wanted to upgrade with another SSD just for files of windows for speed. Is there a way I can simply install the new windows 10 update on the SSD, then remove the old windows 7? Or what is the best way without backup everything and free files in all directions?

  Any help would be greatly appreciated!

  Reagards

  Scott

  N °

  Can I perform a clean installation by using the free update?

  No, it will take you run an earlier version of qualification and start the update of the release candidate. You can run a clean install after completing the upgrade.

  Please be aware that you cannot use the free upgrade offer to perform a clean installation on the first attempt. You must first pass the qualification of Windows 7 or Windows 8/8.1 version (if you do by Windows Update or using the.) ISO file). Ensure that the upgrade is completed successfully and ensure that it is enabled. You can then proceed to do a clean install using media recovery or using the Reset function in the start menu > settings > Update & security > Recovery > reset this PC (start).

• Windows 7 does not recognize my external hard drive and it does not appear in Device Manager but not in disk management

  I'm trying to connect to my external hard drive, but the auto test failed
  and I know that the problem is not the cable or anything like this cause it works on other 2 computers
  It won't work on my laptop
  I tried many solutions but most of them that the hard disk appears in disk management

  and they change its trajectory

  but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
  After that I did any suggestions? !

  Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.

  Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  J W Stuart: http://www.pagestart.com

• Portege 3500 - change HARD drive and deal with overheating CPU

  I recently bought a Portege 3500 without any support of discs etc. It doesn't have a CD or a floppy disk. It has 2 problems, I want to trouble.
  (a) HARD drive is obviously out because it is by clicking on me, and it presents a permanent red section during defragmentation.
  (b) the fans are at full power all the time, and the CPU is running slowly.

  (a) I had a new HARD drive that I reformatted on other laptops. I put a base Windows XP on this HARD drive and uploaded on my external that I attach to the Portege. I used "transfer... Assistant "to transfer files, folders, and settings to the new HARD drive but I don't know how to install the old Windows XP OS Tablet it." I have the product key of Microsoft for the operating system. Any suggestions would be helpful.

  (b) I believe that the transfer of heat from the CPU on the radiator is a failure, causing the processor to hot and therefore slows down. I already solved the same problem with a Dell by coating the top of the CPU with Artic Silver 5 paste. I cannot, however to get the CPU in the same Portege so I removed all the screws down. Does anyone know how to split the case without causing damage?

  Hello

  (a) Unfortunately, but I don t really know how you want to install the operating system without using the recovery CD or the windows CD.
  I searched a bit in this forum and found these messages on the installation of the OS on the Portege 3500:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939

  See also this FAQ:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  (b) on the Portégé, you should find the power saver utility. This utility allows you to change the different modes of cooling and processing speed.
  In my opinion, you should also check if the fans are clean. Especially the dust and debris inside of the laptop is responsible for cooling not properly of the CPU and other parts.

  But if you want to know how to remove the covers so I would recommend checking this site. Maybe you'll find something useful.
  http://tech.irisvista.com/laptops/Toshiba4010/portege4010_1.htm

• Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses