The release of blackBerry Z10 Z10 battery when the phone is turned off

Similar Questions

• iBook randomly started playing when the phone is turned off

  Just noticed this with the upgrade to iOS9. The phone is off (i.e., black screen, but still able to receive phone calls or be activated with PW or digital), and iBooks starts reading my audio book. We then see the iBook controls in the lock screen. No one touched the iPhone 6.

  Does anyone else have this problem? Suggestions to prevent it from happening would be greatly appreciated. Thank you.

  Maybe it's not a specific question of iBook. My iPhone is not actively running - sometimes even just sitting on a table across the room to anyone - lights sometimes at random a random application without apparent reason. (This is especially awkward when he phones random random contacts!) Or, as you say, starts playing audio.)

  I don't know what causes it, and I didn't notice all the reasons for this behavior. I think if the phone was turned off in fact he wouldn't do this, but that sort of impact at the point of having a phone in the first place.

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• Nursery application. ScheduleApplication, when the phone is turned off.

  Hi all

  My question is,

  Application Manger.schedule Application (Desciptor, time, true), starts the application on time, but if the phone is turned off during this planning period, the application is not laucnh when I turn on the phone after a calendar time.

  is it possible that I can do this? I have a CLDC application.

  with midlet, I can use the registry to push but not in CLDC application

  Y at - it any other way to set the application to autolauch at a specified time.

  Any help will be appreciated.

  Thank you

  Anne Laure

  Hello

  AppManager.scheduleApplication (Descrptor, time, true);

  There is no other solution for this if the phone is turned off at the scheduled time, until and unless that it point to another entry.

  I will close this thread. mark resolved.

  Thank you

  Anne Laure

• If I'm offline (e) all emails deleted id (removed from the phone) also turned off contacts deleted history in safari where contact information would come from contacts

  If I'm offline (e) all emails deleted id (removed from the phone) also turned off contacts deleted history in safari where contact information would come from contacts

  Of the previous function of recipients.

• BlackBerry Smartphones Priv autorotation setting returns to portrait when the phone is turned off

  I like to keep the orientation of the phone to turn but will not hold the adjustment.  I change the setting for automatic rotation whenever I turn on the camera, but once I got disabling the phone setting goes back to the Portrait.  I have other Android devices, and I have a Z10 and Q10 and never had to put auto-rotation once.  I've been foolling around during almost two weeks now with the support of BB and all I get is an evasive.  (They answer as I am stupid and do not know the difference between the two icons.)  I changed the quick setting of parameters and display, it always comes back to portrait when the phone is off.  Does anyone have ideas on this?

  Hmmm... Well, I don't remember what is happening for me with this exact same build. All I can do is recommend you try again with formal support... something is wrong if she does that.

  Or, if you don't want to talk to them, another thing, you could try the BBVE app, to see if he can identify any problems:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035973&language=English

  Otherwise, this has always been like that? If this isn't the case, then what has changed just before everything started? A new application? An update of a certain type? Something else? Think very carefully that the smallest thing could be causal.

  In addition, the only thing I can recommend is a reload of the OS, using what I call the "skeleton" procedure, in an attempt to circumscribe the precise causal element:

  1. Via the autoloader, load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  Good luck and let us know!

• Update blackBerry Z10 OS10 10.3.2.2168 turns off the Flash in the browser

  Hey everyBerry! Is it just me, or is the built-in Flash Player went into the last OS update?

  I distinctly recall having a menu option to turn on or turn off the Flash and it's gone and Flash support in web pages went as well.

  Nevermind, I just said to myself. Heck! Flash is no longer supported.

  http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000036434

• FM Radio has its out only when the screen of the phone is turned off

  FM Radio has its out only when the phone screen is turned off. Even for the speakers or headphones.

  I SOLVED!
  I had turned on 'Ok Google' and set it listening to "from any screen. Looks like Google to try and listen to all the time and blocks Radio FM output for headphones and speakers

• alarm when the phone is turned off

  I tried to keep an alarm with the phone turned off.

  But it dosent ring.

  is there any setting to change this

  Thank you

  New-generation devices are not able to do.

• the phone screen turns off during a call... No control over the phone

  My Defy screen turns off during the reception or to make a call... Impossible to control the phone... need to take out the battery to turn off the call... Help! PS this could be a software issue or user?

  Do you have a case on your phone? It seems that the proximity sensor is processing the phone as if it were close to your face. A case or a screen protector can cause problems if it includes the proximity sensor - near the earpiece.

• BlackBerry Smartphones battery drains 50% of the overnight when the phone is turned off

  This is a common problem, or I have a duff/phone battery. I ' v has the unit 3 weeks always powered off during the night. Sometimes it drains, sometimes not without reason

  You probably have some application that runs in the background (as a page of open Active browser?) that has drained the device.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
  And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• HP ENVY m4-1015dx Notebook PC: hp envy m4 battery not charging but fresh when the laptop is turned off

  Hello!

  I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.

  Hi @Phanz,

  Thank you for your inquiry.

  I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number.  You have removed the battery while the laptop is running.  Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%.   You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.

  You did all your Windows updates?

  Have you tried the troubleshooter in Windows?

  First of all, I would like to try a Windows restore to before remove you the battery.

  HP computers - using the Microsoft System Restore (Windows 8)

  If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).

  Then you can try the following steps.

  HP laptops - test and calibrate the battery (Windows 8)

  The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.

  Step 1. Go to the Device Manager
  Step 2. Select the stacks
  Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 4. Click on uninstall
  Step 5. At the command prompt, put a checkmark in the box to remove the current driver
  Step 6. Shut down the computer

  Step 7: Remove the battery for a minute and then put new
  
  When the computer returns to the top it should automatically find the driver.
  
  Step 8. Go to the Device Manager
  Step 9. Select the stacks
  Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 11. Click "automatically search for an updated driver.

  Do the same thing with embedded controller compatible ACPI Microsoft.

  Last option is to reinstall your Windows 8.1 Pro.

  Good luck!

• Want to fire green W701 fingerprint reader when the laptop is turned off

  I realize the amount of electricity it uses is trivial, but unfortunately the accusation that carries the battery isn't much else. For the most part it's just because I don't have a use for the fingerprint reader. I completely uninstalled the software from the control panel. I thought that would get the light, but the "light on" survived the uninstaller not so complete.

  I hope that there is a way to do it in the bios. If necessary I could re-download the software of fingerprint and do a from there, if possible.

  It is possible to do anyway, please let me know. It's a minor thing, but I'm pretty annoyed that I'd make a sort.

  When you turn on the computer (off-state), press F1 when you see the Lenovo logo (until the BONES start to load). "I think that you should find the fingerprints under security settings). It shouldn't be too hard to find.

  Edit: Looks like that I don't remember it correctly. In the BIOS, you have the option to completely disable the fingerprint reader, but you do not have the option to turn off the green light only without disabling the fingerprint reader. If you want to disable the fingerprint reader completely turn off the computer, then turn on and press F1 when you see the Thinkpad logo (prior to the OS). When you enter BIOS click protection on the menu, and then select access to the Port of IO. In this list, you should have the ability to disable the fingerprint reader that I am sure that will also disable the go-ahead since the sensor is no longer in use. Press F10 to save and exit from BIOS.

  To remove the green light only, or disable the option to turn on your computer by sliding the finger without completely disabling the fingerprint reader, in my view, you must reinstall the fingerprint reader software. Then, you must open the application after installation and type your password or by the finger scan enter enter parameters. Then click the settings button in the toolbar and you should have several tabs where you can turn off the green light or disable the use of fingerprint predesktop authentication.

  -gan