Similar Questions

• SanDisk Clip Sport Firmware update

  Is it more Firmware updates for this mp3 player. IAM having bug problems.

  Whenever there are firmware updates, it is published here (usually before anywhere else). If you don't see a new f/w posted here, you can assume that it is not everything. You can stop asking.

• Stereo does not read the Sansa Clip after firmware update

  Hello

  I upgraded to the last 2.01.35a of the previous 32.

  Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

  I came back to the previous version and it works again.

  Is there a problem with the latest version of the firmware?

  Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

  any ideas?

  Thank you.

  one.

  Hello

  I tried AutoDetect, MTP and MSC and none worked.

  Now everything works well again, and I will consider the reset factory settings to change the region for other times.

  Thank you.

• The HP DesignJet T520 firmware update

  Hello

  I have a HP Designjet T520 and I'm trying to update the firmware on the printer.

  The printer is currently connected to our print through our network server

  The aim Guide do the following:

  Using the integrated Web server, select Firmware update

  Although, when I connect to the web server, I don't see the update of the Firmware.

  Can someone tell me where is this info?

  Thank you

  René

  Hi ReneMenard,

  The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

  Designjet Forums

• Impossible to find music on Clip after firmware update

  I looked in several threads and could not find an answer.  I have just updated the firmware on my 8 GB Clip.  When it is connected, Windows Explorer shows the music out there (I can even play the Explorer), but on my device, 'Songs', 'Artist' 'Albums' etc. Read "empty".  What should I do?  Thank you.

  Fixed.  OK, I copied all the music (just bought yesterday) on WMP and then re-sync'd and it seems to work fine now.

• The WAG54G v1.2 firmware update

  I have a WAG54G ver 1.2, 4 port eth + adsl wireless router.  The last update of the firmware on the support download site is Ver.1.02.1 from 18/05/2004, which is ridiculous! (details here: http://linksysbycisco.com/EU/en/support/WAG54G/download)

  It comes to the NVA, that I installed it on the router and the lt does not have same setting of WDS, so unit is more or less useless.

  I checked the alternatives open source (wrt line), but they are all with WAG54G V2 and no support previous models v1 and v1.2

  I need to somehow pass this router to something functional.  I checked the page of GPL code as well and while ls there a WAG54g list, I think that itd for V3 routers.  So the question is:

  1 is usable on v1.2 source GPL code (I guess not)

  2. suggestions for a WDS on the router (including beta / alpha firmware) is appreciated.

  Even the GPL code will not help you because often, it does not include modem etc drivers who are not GPL depending on the brand and the pilot.

  Another good reason not to get these combos of modem/router but get a simple simple modem with a router ethernet standard that you can use on any access technology...

  I can't talk about beta firmware. At least as far as I know even more recent E4200 does not support WDS with all other brands as Linksys. And you can be sure that they will not add anything to the WAG54G. It's all just too old.

  WDS has nothing to do with the routing. WDS extends the LAN inside the network local, there are only ethernet and MAC addresses. The routing is only between routers.

  What is so complicated: it's complicated. You repeat traffic. Access points must include any traffic for repeat and which is not, which means that they must find the topology. WDS severely effects of bandwidth. WDS often only works with WEP (or static, anti-rotation key WPA). Do a little reading in the internet...

  As it was not standardized how to handle questions from topologies you will often find that a Repeater works with a gateway of the same brand. A WDS would be possible with the same brand devices

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• The WRT54GL v1.1 firmware update: "upgrade are failed.

  I'm updating my WRT54GL v1.1 firmware.  I downloaded a file called FW_WRT54GL_4.30.13.016_US_EN_code.zip, which I unzipped to produce a file with a .bin extension.  I use the web interface to update the firmware with the .bin file and get the error message "upgrade are failed" very late in the process of upgrading.  I tried to reset the router by pressing the reset for 30 seconds button, but it does not help.  I use Safari on a Macbook Pro under Snow Leopard 10.6.2.  Any help is greatly appreciated.

  Try to use different browser and check... If possible try to use Internet Explorer.

• The MXP 95 edge Firmware update

  Recently, I came in an operation using a Tandberg Edge 95 legacy. The firmware of the device, from what I can tell has never been updated. It is currently running F6.0. I downloaded the F9.0.2 package but I am not familiar with this procedure. Can someone help or direct me to a site of insturctional on the updating of this device?

  upgrade is covered in this document - page 141

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MXP-series/F9/administration_guide/mxp_series_administrator_guide_f90_excl-full-menu-structure.PDF

  You also need a release F9 key.

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• the block erase CP1525nw firmware corrupted - update

  Win 7 64 bit home premium - 128 MB RAM "corrupt firmware ready 2 Download" cp1525nw printer display a message.

  Updated the firmware, I've followed the process below:

  I deleted the network printer and reinstalled as a printer USB (initially port usb002).

  Is turned off the printer.

  Downloaded the firmware using cp1520_series_Fw_update_20131028, got smiley face

  Checked the Firmware stored in windows/systems32/spool/printers

  Printer

  Got to spool print message "printing error".

  Changed the port usb001 and restared printer to spool print document "firmware update".

  Printer has begun to deal with the firmware update

  Queue is removed from the printer.

  Firmware update seems to stop about "erasing...". »

  Suggestions welcome!

  RESOLVED - printer replaced under warranty extended by retailer (Officeworks).

  Firmware could not be updated.

  Model HP no longer exists. Model HP equivalent not in stock.

  Now owner of a similar 3170CDW Brother HL cost to the original.

  > end of post

• Thunderbolt Display Firmware update could not complete.

  Hello.

  Am myself a brand new Mac Pro recently and I'm loving it. Hooked up to my old TB screen which is unused to cause a few months the all-in-one cable is broken. Not much, I bought a cable TB, and used only to plug it in and it works fine.

  That is, until I went in the App Store and noticed a firmware update for display among all other system updated. I do not think that anything of it in time and just continued to download and install all updates in bulk. Well, after all has been said and done I got the popup saying he could not apply the on-screen since it must route the cable all-in-one to do. Not a problem, I thought, it's not that important to me it is installed. But now after whenever I restart the machine, I get the annoying popup even in my face, no matter what I try to do to remove it. I'm fine with not getting updated, I just want this bitch popup go away!

  I am a very advanced user, so I am not against the orders of terminals and/or editing plists performer or that you have to solve this problem. I don't know where to look and I thought this would be my last ditch effort fixing before you say screw it, wipe the system and start over. If no preview of this would be useful. Thank you.

  Apple doc:

  Thunderbolt Firmware Update 1.2: continues to reappear and Thunderbolt ports and target Display Mode may not work

  After the installation of Thunderbolt Firmware Update 1.2:

  • The Thunderbolt ports may not work.
  • Target display mode may not work.
  • The update can keep reappearing as available for download.

  This happens when one Thunderbolt self-powered (other than one directly connected Thunderbolt display) device is connected to a Thunderbolt port during the installation of the update. To resolve this problem:

  1. Shut down your computer.
  2. Disconnect all devices Thunderbolt.
  3. Wait for 10 seconds.
  4. If you use a Mac mini with a Thunderbolt screen, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other devices Thunderbolt at the moment.
  5. Restart your computer.
  6. If sight Firmware 1.2 update is available, download and install and restart your computer when asked. If the update of Thunderbolt is not available, the update has been successfully installed.
  7. Reconnect all devices Thunderbolt.

• HP zBook Studio G3: zBook Studio G3 - DEATH BY INTEL ME FIRMWARE UPDATE

  WARNING!

  DO NOT INSTALL THE UPDATE OF THE COMPONENT OF THE (COMPANY) INTEL MANAGEMENT ENGINE FIRMWARE!

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841 & swItemId = ob_159465_1 & swEnvOid = 419...

  Component Firmware Intel management engine (ME) (American International)

  11.0.0.1194 Rev.A
  December 1, 2015

  We bought 5 of these laptops for our Engineering Department and I was against a tight schedule to get them deployed (the next day). I started working on obtaining a set of installation with the necessary software and then I just want to clone one for the other 5.

  I did a clean install of Windows 10 and installed all the drivers from the HP site. Then I ran Windows updates until everything is up-to-date. I disabled Windows Defender. Now all that remained was update the firmware BIOS, Intel ME and Thunderbolt using the downloaded utilities since the page drivers. The BIOS installed fine, but it's a really weird update process. Due to the beeps and lights blink during his work. There is no progress bar to let you know if she is doing anything. At some point, as the beeping stop but it's still really work. Then he starts and updates another part of the system and so on. Anyway, that everything worked fine. No problem with the update and Windows 10.

  So I ran the update of the Firmware of Thunderbolt and open up a command window saying that it couldn't find the controller. It looks like not there nothing after that point and just closed.

  Finally, I ran the Intel Management Engine firmware update utility. He opens a command window and says that it is loading the file and check and so on. Then he wrote the Flash file and takes a minute or two, doing so. Once it's done, the firm order window and back to business as usual... until you restart. Once you do this, the system is toast. It does not start. Black screen, fans run at high speed and the CapsLock and NumLock bulbs only 5 slow flashes indicating that there is something wrong with the motherboard. I'm starting a supported by HP chat session.

  I am told to disconnect the battery. To access the battery, you need a bit T - 8 Torx and you unscrew 11 screws to remove the grill cover and low fan (pedestal). I did that and disconnected from the battery. Reconnect after a few minutes and tried to start. Nothing, same thing. The support agent told me that a technician on site should be sent to replace the motherboard.

  While the lower lid has been opened, I noticed that there are two small LED lights near the SSD. There are supposed to be the diagnostic lights and I found an article in the service manual indicates if one of the LEDs is lit, the motherboard should be replaced. This lights a few seconds after the connection of the power supply for the laptop or by pressing the power button.

  I asked the support agent if they knew why it happened, but they did not know.

  So, I got 4 portable more to work with. I took off the dead laptop SSD and put a charge in a brand new out of the box. Started by and on the desktop Windows 10. This laptop had BIOS v1.03 on this subject so I ran the BIOS updated and rebooted. All right. At this stage I myself asked to perform other upgrades of the firmware or not. I thought that I had a 50/50 chance and I'm the kind of person that simply be whether it was a fluke or if there really was something seriously wrong with the update of the Intel ME firmware. He ran while first instead of love at first sight to date. Update Intel did ME the same thing before, opened a window to order, checked and then flashed... and after a reboot I got another laptop dead.

  At this point, I shook my head and frowned, looking at the HP logo.

  I tried calling support, but their laptop zbook/computer service has been closed from 10 is no support by phone or chat support. I have to wait until the morning to make a call in warranty for this second laptop dead.

  The Intel ME firmware update released on download of HP ZBook Studio G3 section was not compatible with these laptops and caused the laptop no longer starts. Only an exchange of motherboard could solve the problem. HP since then changed the link to the Intel ME firmware update for the appropriate softpaq.
  
  Those who had run the update of the bad firmware and their laptop brick had to call the HP technical support to schedule a replacement motherboard on the spot.

• How WE / OFF sansa clip jam

  I bought the sansa clip jam, and I can't ON / OFF.
  I need to wait a few hours and sansa clip jam is off and connect him to the load to the sansa clip jam
  Where is the ON / OFF?

  Click and hold the Center button for three seconds. Same on/off button.

• Firmware Updater problems :(

  I just download the Sansa firmware update, and when I go to run it, an error message appears saying "the Installation failed. Please try again later. "I started again and received the same error message. Then I waited about 30 min. and sure enough, same error message. What I'm doing wrong!

  OK, the fact is that 90% of us who have been here very long you will simply ignore the update. On the "rocket", go to settings > system settings > Info and watch the number of Firmware if it starts V01 access the Thread called Fuze Firmware Updater, in the first post to find the update of the firmware that starts V01 and then follow the instructions on this post. If your Firmware number starts V02 find this firmware and follow the instructions.