The screen with the custom title?

Hello

I need to create a custom so that I can put an icon and 2 lines of text on the title screen or full screen.

I need the title to stick at the top of the screen while scrolling.

Extend the screen or full screen?

Should what methods I replace?

Thank you

For this you need

(1) extend from MaianScreen

(2) create a handler and add it

(3) SetTitle (MyManager);

VerticalfieldManager vfm;
vfm = new VerticalfieldManager(Manager.USE_ALL_WIDTH |  Manager.USE_ALL_HEIGHT);
vfm.add(Bitmapfield);
vfm.add(label1);
vfm.add(label2);
SetTitle(vfm);

may be it helps!

Tags: BlackBerry Developers

Similar Questions

When you try to open sites, get a white screen with the title - trc.1emv2.

Original title: Hi I have connection problems.

When you try to open sites, I get a white screen with the title - trc.1emv2 - I left it sometimes for several minutes and nothing happens. I wonder if this could be a virus? This problem started two weeks ago, but I have not downloaded anything > it could be a virus.

Hello

1. have you enabled all the parent controls?

2 do you have limited access to all Web sites?

3. what browser do you use?

You can view the following items and see if it helps:

Difficulty of your web browser hijacked

What is the browser hijacking?

Hope this information is useful.

After a black screen with a cursor, the performed system restore, now cannot open programs, USB drive

Original title: Windows 7 Home Edition

Yesterday, my pc only has a black screen with a cursor. I tried to restore on another point but then after starting upwards and put my password, I get the home screen but cannot open any programs. I can't use the USB stick or cd / dvd drive so how should proceed to solve this? I can't put my external modem to make a back up and I really want to fix this without losing all the data on my pc. I can run programs in safe mode and windows installation disc opens in SafeMode as well, however I can't set safe mode.

Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)

Select the disk partition where you want to install Windows 7 click Next.

You will receive the following warning:

The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

The installation program will now begin installation. During installation, your computer will be restarted several times.

Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

Factory screen and Service the customer default is terrible

I've had my Moto X 2nd generation about 3 days ago. I had my hand over my desk and he slipped from my hand and hit the Office about 4 inches up. Well Yes you guessed it, the screen broke. I was on the phone with the representatives of the Service to the customer for the last 3 days. Did not get anywhere. I bought an extended warranty, but apparently that does not at all help. I am to pay 150.00 for the replacement of the screen, and also back 25.00 for a new wood. This is by far the worst customer experience I've ever had, none of the representatives can speak English very well and none of them seem to have a clue about the Moto X 2nd GEN, it's really a shame because I had a Motorola since the razor and it changed my opinion all thereon. Probably will never buy a Motorola product again.

When you say "extended warranty" do you mean motocare? Also check your terms credit card... a lot offer the accident insurance for the first 30-90 days.

I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

I'm not being updated hardware or software on my Dell Latitude D8380.

I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

Please can you help. Thank you, Sue Dixon

Hello

Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

Reference:

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

1. click on start and then click Run.
2. type msconfig and click OK.

The System Configuration Utility dialog box appears.

3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.

Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

How to perform disk error checking in Windows XP

http://support.Microsoft.com/kb/315265

Let us know the status of the issue.

I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

Original title: how to find missing or corrupt files on windows xp pro

I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files? My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

Hello

1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
2 are you able to install any other software?

Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

Step 1: Try to install the webcam software in clean boot state and check.

From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.

Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

Understanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427

Is it possible to click and hold something on the screen with the keyboard?

Original title: click and hold the function with a mouse?

Is it possible to click and hold something on the screen with the keyboard? My mouse is dying and I can't afford a new right now, but I need to move things on the desktop and do not know how, is there maybe a shortcut for this?

Hello

There is no this keyboard shortcut to accomplish the task.

For more information about keyboard shortcuts, see: keyboard shortcuts for Windows XP

Hope the helps of information.
Please post back and we do know.

whenever I try to install windows xp I have blue screen with the following error: 0x0000007e

Original title: blue screen

Hello

I have format my laptop and now whenever I try to install windows xp, I get a blue screen with the following text

error: 0x0000007e (0 x 0000005, 0x808c4de1, 0xf78da150, 0xf78d9e4c).

I try everything, I remove the memory modules RAM, resetting the bios, etc, nothing works.

can someone help me?

Laptop is a toshiba L20-153

Thanks Joakim

Hello

These error messages may be due to hardware problem.

The methods of troubleshooting provided in the below article might help you.
How to troubleshoot a Stop error 0x0000007E in Windows XP
http://support.Microsoft.com/kb/330182

After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black

The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.

Hi Jeremy,.

Thanks a lot for your help. You're right, I should have said no upgrades and updates.

There were a total of 10 updates:

4 a security updates for Vista,

1 security update for the Microsoft 2010 information access path,

1 day of cumulative security for IE9.

1 windows Live essential 2011

1 definition update Windows Defender (KB915597)

1 "" for Office 2010 "

1 April 2013 malware tool

I uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.

I also checked the graphics card and told me that I had the latest version of the software.

Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.

How and why the full frame disappeared April 16 remains a mystery.

Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot.

My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

I have a black screen with only a white arrow to the mouse cursor. I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor. How can I get my screen back?

original title: black screen

Hello

Remember to make changes to the computer before the show?

Try the following methods and check the status of the issue.

Method 1:

Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

Method 2:

If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

What are the system recovery options in Windows Vista?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

Make repairs to the system from the Windows recovery environment.

http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

Method 3:

If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

Black screen with the underscore flashing in the upper right corner - HELP!

Prouct name - laptop HP 2000-299WM

Product number - QE282UA #ABA

Operating system-Windows 7, 64 bit.

No error message.

No recent changes before the problem occurred.

-For starting, my laptop goes to the screen with the logo blue HP and then straight to a black screen with an underscore flashing in the upper right corner. I tried to restore it to its factory settings and other things, but nothing did! Ive been wondering if I should try what I saw worked for another customer here - http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Black-screen-with-blinking-cursor-HELP/t....

Help!

Hello

Try typing the esc key when you start the laptop to see if it launches the Start Menu - if this is the case, use the arrow keys to select the Boot Menu, click on enter and then use the arrow keys to select the CD/DVD drive and press ENTER again.

Kind regards

DP - K

Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

Original title: black screen?

My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

Hi Miguel C.

a. What is the brand of your computer?

b. do you remember of any changes to your machine before the question?

I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.

J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.

Note: Do not move this jumper with the computer turned on.

Warning of the BIOS:

BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.

Aziz Nadeem - Microsoft Support

[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

* Original title: start Windows 7

I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

Probably yes it is damaged in the case otherwise he would start.

I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor. The cursor does not type. For me, maybe I need to reinstall windows 7 and startup tasks are corrupt. I have my product key genuine for the computer, but no way to get to windows. How to restore windows on a netbook that won't start?

original title: Netbook Windows 7 problem

New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

Make an image of the DVD, you can use a program like ISO Recorder to do.
http://alexfeinman.com/

If you don't have a Windows 7 DVD to borrow, try to upload a picture:

32 bit
http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

Utility delete EI.cfg allows you to use a product key
http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

You can create a bootable USB stick with the following:
Download Windows 7 USB/DVD tool
http://store.Microsoft.com/help/ISO-tool

Skip entering your product key Windows 7 and complete the installation.

When you reach the desktop, click Start, right-click on computer

Click on properties

Scroll down to the Windows Activation

Click the link x days before activation.

Click on the link that says: "show me other ways to activate.

Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

Click next

Select the Activation of the phone

Click Next when you enter your key page

Select your country

Click Next, call the number listed

Be sure to explain your situation to the Appeals Officer.

They will give a confirmation ID, enter it

Click next to complete the activation.

Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

Reactivate the installation, you may also do it by phone:
Activate Windows 7 manually:
1. click on start and in the search for box type: slui.exe 4

2. press enter on your keyboard

3. Select your country.
4. Select the telephone activation option and brace yourself for a real person.

Why Windows 7 setting would deliver a black screen with the cursor visible before you load the Office?

I had a very unusual event this morning. I am running Windows 7 on a desktop computer. On startup, I reached the login screen and proceeded to connect to my name. Prior to loading the desktop computer, however, I was in a black screen with the cursor visible.

1. I am able to load successfully under another user ID.
2. I am able to boot in safe mode (with networking) using my own code.
3. I did a system restore with no luck. The problem persists.
4. I don't think it's a driver issue because it would affect the two IDS and who does not.
5. I have a touch screen and the white slider moves even in the place where I touch. (what works)

Issues related to the:

1. what "custom" setting would result in a shift of the display of this type?

2. If I go to Windows 8, will I have the opportunity to 'reset' my display options? Or it will automatically upgrade to the wrong setting?

Thank you. Any guidance would be greatly appreciated.

Thank you for your solution.

The problem turned out to be the result of a combination of events.

1. I did a change of media display a week ago but never restarted.
2 MS did the periodic security update that rebooted the machine overnight.
3. the update may have actually been in the middle of the installation when I got to my machine in the morning.
4. when the screen has not responded, I restarted manually by pressing the power button.

Ultimately, I was able to access Task Manager and found several instances of several components running. When I "force stop" several of them, the office completed and I was in business.

I still have the wide black border around my 'Live TV' screen in Windows Media Center, but that's another question for another time.

Once again, thank you for the time spent to help me.

Best regards

Steve

The screen with the custom title?

Similar Questions

Maybe you are looking for