The technique of the BB information center - error

Similar Questions

• The Windows Security Center error message: could not start the Security Center service

  I did disk cleaning, defraged, ran Malawarebytes and defender of the window, unexpected uninstalled programs, all my updates are current, delete all but the most recent restore points and ran the System File Checker tool Vista who finds some errors file that it could not fix.

  When I try to turn on the windows Security Center by clicking on turin on, I get "the Security Center cannot be started."

  Suggestions?

  Frosts of North

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products do you have on machine now? And
  who have you ever on it, even if you have uninstalled them? (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Photosmart C4480 all-in-One gives the HP Solution Center error

  Hello

  I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

  I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

  When I run the HP Solution Center, it says at the top:

  "HP Photosmart series C4400

  Disconnected! »

  When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

  Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

  Any ideas?

  Thank you!

  HP Envy m7 running Windows 10.

  Simply click on the star

  Thank you

• The HP Solution Center error message

  I want to use the scanner on all-in-one printer, HP Officejet 5610. I am running Windows 7 (64-bit).  When I select HP Solution Center it says that I'm not running the latest version of Adobe Flash Player for Internet Explorer.  It will not work until I update to the latest version. However, when I update I can't launch the videos sent to my email, so I was advised to uninstall and revert to a previous version.  How can I get the HP Solution Center to run without upgrading to the latest Adobe Flash Player. BTW, my favorite browser is Mozilla.

  I hate to say this, but you can't.  Center solution requires the latest version of Flash Player to run.  I don't know why HP has designed this way, but you need the it or any buttons.  I'm sorry.

• The Catalyst Control Center error message

  I had difficulties to show online flash videos so I upgraded my intel graphics card from Intel HD Graphics 3000 on the Intel site. Since then, I get this message:

  "The Catalyst Control Center is not supported by the version of the driver for your compatible graphics card. Please update your graphics driver from AMD, or activate your card AMD using the display manager. »

  I tried to update the graphics card (Radeon HD 7470 M) AMD but it says that is already updated to the latest version and looks like it has been activated. When I clicked on the graphics card I get this message in the device status:

  "Windows has stopped this device because it has reported problems. (Code 43). »

  I use:

  Product name: HP Pavilion dv6 Notebook PC

  Product number: A7P58EA #ABU

  Windows 7 Home Premium 64-bit Service Pack 1

  Hello ladyv128.  I understand that you are having problems with your graphics card.

  Try to install this version of the AMD driver, and then restart your laptop.

  I would like to know the result and have a wonderful evening!

• T400, cannot start the Catalyst Control Center - error 'GPU active not supported'.

  on a machine running vista business 64-bit current t400.

  last week all was hunky dory.  This week, when I try to open my ati catalyst (CCC) control center, I have the following error:

  "ATI catalyst control center cannot be started because the active gpu is not managed.

  I read a few posts on this problem from not using the ATI graphics card and being rather on the integrated graphics card.  indicate the positions I could reactivate CCC simply by clicking on the battery icon in the system tray and selecting "mode high performance" to force the machine to use the discreet graphics card.  After I do and then try to start the CCC, I get the same error as above.  at this point after switching to the mode high peformance, my device manager also lists "mobile Intel (r) 4 series express chipset family ' as my graphics again.  If I have left or right click on the battery icon in the status bar, I don't see any options for explicitly switching cards.

  the card driver intel 4 mobile is listed as being from ATI to version 8.520.4.4000.

  I'm not sure of my version of the driver for the ATI card.  and I don't know where to look for it.

  to my knowledge, nothing but a number of 'critical' windows updates have changed on my system between the time when CCC was working last week now.

  any suggestions on how to fix this?  and what it does to stop working?

  Thanks in advance for any help.

  I finally thought to it.  and no new drivers or relocations were necessary.  at the end of the day, all I had to do was turn on version lenovo Power Manager (which appear in my taskbar like a horizontal green battery with the number of minutes of use remaining).  from there I can left click and access the menu that has the switchable graphics option where I can choose the economy of energy or high performance.  If a from there, I select high performance, I can then open CCC.

  the important thing please note this is to access this menu, you must be using power management program of LENOVO thinkVantage (sticking the Green battery on your taskbar icon), NOT windows built in the power manager, which appears as a vertical grey/blue /? battery in the tray system (at least on mine).  Once you have, you can explicitly pass the graphics cards.

  the strange thing is, I had been accessing CCC without explicitly switching the cards without problem until last week.  so in a way that the default setting should of spent high-performance energy saving, thus putting me on the integrated graphic card unless I went it manually.  weird.

  slide, thank you for your help.  I appreciate it.  and it is an interesting note on freeing more memory by disabling the switchable graphics.  I'll probably this give it a shot and see how I like it.  memory is never bad!

  Thanks again to everyone who helped.

• Media Center does not download information Guide - error during the processing of the data

  Media Center displays an error saying I need to look at the log of update, but I can't find the update log. Try to download the Information Guide to hand does nothing.

  Of your last log its connection and download the guide, so there is no connectivity problem as stated above.

  Try clearing the guide and the tuner configuration data and set up once again and then check if the guide updates correctly:

  1. close Windows Media Center if it is open.

  2. go to Start , type services.msc in the search box and press ENTER.

  3. look for the following services and check the status field, if they are started and then right click on them and chose to Stop:

  ·         Windows Media Center Receiver Service

  ·         The Windows Media Center Scheduler service

  4 open tasks now CTRL and SHIFT Manager, and then press the ESC key.

  5. click on the processes tab, then click on Show processes from all users .

  6. in the list, click the name of the Image to sort by name, and then look for the following:

  ·         ehmsas.exe

  ·         ehrecvr.exe

  ·         ehsched.exe

  ·         Ehshell.exe

  ·         ehtray.exe

  ·         mcGlidHost.exe

  7. in the case of imperfections, right click and choose end process.

  8. go to start, in the search box, type the following path: C:\ProgramData\Microsoft\eHome

  9. find and delete the file mcepgX-X - X.db and X-mcepgX-X file

  After that it's over, go through the configuration of the original tuner once again and check if the guide updates correctly.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virtual center 4.0 - need to detail the technical information on windows services, very important

  Does someone know where I can find all the technical information

  on the vsphere virtual center 4.0 Services,.

  I want to know how to solve and follow all troubleshotings

  steps, because I had and error at the start of the services of the virtual Center.

  She was tied to the user that start services, I had to change the user

  to an account manager and the error off

  but I want to know for example

  all the 4.0 virtual center associated with list of services.

  all the sequential process to start all services

  How to start these services, for example in a batch file,

  users of system start all services

  I think that this info is not complete covered in manual support.

  someone has the info.

  Thank you

  Maynor

  Have you already taken a glance article KnowledgeBase VMware VirtualCenter from VMware service does not automatically start after reboot

  André

• service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

  Hi Carl_Focus_Phone,

  ·         Is confined with Update Service Pack 3?

  ·         Did you do changes on the computer before the show?

  You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also see the following articles for more information:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Let us know if that helps.

• "An error occurred during the application of the security information to G:\ Trash' access denied.

  original title: Lost Forever?

  After you change the permissions for an external hard drive, I was unable to open the files on this disc. Then I tried to reverse what I did and when I choose apply I get the message error "an error occurred during the application of the security information to G:\. Trash' access denied. the user, I'm changing the permissions is "creator/owner.

  If you choose to continue you get the same error message with different location after g:. If you click Cancel the message is ' stop the spread of the permissionsettings leads to a contradiction of State in which some objectshave settings but others not. " If you have made the change by mistake, you must apply the correct change immediately. to achieve a consistent state. I don't know what I did wrong. do not remember because she has been veterinary disabled brain damaged. Thank you!

  Hello

  You must take ownership of files and folders. Do follow link below:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Windows could not set the offline locale information. Error code: 0x80FE0000

  Windows could not set the offline locale information. Error code: 0x80FE0000

  Handsome,

  Found that I got the same error (0x80fe0000) while trying to reinstall Windows Vista, Service Pack 1 on a Dell Inspiron 1545. Originally, the BSOD's happened and repair Windows has been in vain. Formatting the drive did not resolve the issue

  Replace the player has solved this problem for me. It seems that the disc has been/is damaged and would fail to resettlement.

  time of installation of $60 later and two hours and everything is fine.

  I hope this helps!

  DrMardo

• Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

  Original title: error message

  Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

  Hello

  Update the driver may solve the problem. See the following article to install/update the drivers.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

  http://support.AMD.com/us/gpudownload/pages/index.aspx

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.