The user is unable to use a PPTP VPN behind PIX 506

Similar Questions

• How to make only two columns as editable in five online when the user clicks a line using adf 12.1.3.

  Hello

  I displays a table on the screen. This table is read only during the initial page load. I want to do only two columns as editable on five in a row when the user clicks a line using adf 12.1.3.

  Is it possible in the adf. If possible how to handle this. Please help on this.

  For example, drop table editable Full and then replace rest inputText (components entry in general) with af:outoutText, everything except those two.

  And use the clickToEdit feature...?

• prompts the user for input, but use the last entry as departure

  Hello, I am currently having a VI that I invited the user to a text and then input I use this input text thereafter.  However, I would like to have the guest so that I can use the last entry of the bite as a starting point.  Started the code, I do not know how to proceed.  Any help will be greatly appreciated.

  Thank you.

  hiNi

  If you add a record to offset uninitiallized and change the express vi, you can do it.

• give the user local administrator rights using local admin script

  I would like to give a domain user with local administrator rights using scripts via sccm, now that user does not disconnect, and if the admin rights come into force. I want to get the user who is logged on rights and it shall take effect as it is connected. This is possible thanks to a script or restart a service or group policy update?

  Thank you very much for your time.

  Asher

  Hey Asher,

  Thanks for posting in the Microsoft Community.

  As you try to give a domain user with local administrator rights using scripts via SCCM, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  System Center Configuration Manager

• [ADF, JDev12.1.3] Which is the right place (for example, bean or AM) to create and store secret data that the user is unable to intercept?

  Hallo,

  in my page, when the user clicks on a button, I'have run an operation and in particular generate a code PIN and password that the user must not not know/interception.

  The STEM must be kept "secretly" in the comic book.

  I created a function to generate the PIN code in the 'Utils' to the ViewController project class.

  In the managed bean associated page I would deal with the click of the button through its ActionListener function.

  In this function I would also generate PIN call the "generatePIN" works and finally store the PIN in the comic book.

  Is the bean, the right to 'place' where build and store the PIN in the database?

  Maybe I'd better to generate the PIN and then store it throug a function of the module of the Application?

  Thank you

  Federico

  Well, he should go to the model because it is part of business process and is not part of the presentation of data.

  (AMImpl, VOImpl, or same ViewRowImpl are good places to write such code)

  The STEM must be kept "secretly" in the comic book.

  I don't know what that means exactly.

  Aspect of security, no matter where you place code (in the model or ViewController) because both are executed inside the Java virtual machine server-side.

  If you need to secure communications between WLS and DB, then open the database by using the SSL protocol connection (or create the stored procedure and generate PIN directly in db)...

  Dario

• Recomposition of desktop clears the user setting when you use persistent disks

  I'm in test phase of VMWare View, and I created my server administrator display and a server of composer. I was able to create jobs with the composer. Assignment of a user on the desktop and user can connect through the Client view. When the user logs on, they get a C: (Local disk) drive, drive D: (PersistentDataDisk) and a drive E: (SystemDisposableDisk). The user can create shortcuts and install their profiles of Lotus Notes and everything works great. The user can disconnect and reconnect and stay all settings. If I recompose the office by changing the initial snapshot used to create the office and place it on the office compound it clears all the settings of the user.

  I want to know if this is normal behavior or if the settings of users should be "replication" to the PersistentDataDisk and reloaded when the user connects again. I want to be able to have users customize their desk tops and others for their taste but have the ability to add modifications to the software via the Redial feature.

  Thanks in advance for your help.

  Josh

  A persistent record of the composer view should not be affected by a restructuring or a refresh operation.    Have you checked that the profile is being created on the disk D:\ sucesfully?    I remember problems in the past, if the user was connected to the image of the mother and then the profile remained on the C:\ drive instead of passing to D:\.

• give the user an option to use with audio or without audio

  How to give the user to use published.exe with no audio and audio options?

  If they want with audio just click audio or without audio

  IM using captivate 5.5

  Win 7

  There is a mute on the playback bar button.  All the user has to do is click here to disable audio.  If you have done the captioning text and it synchronized with the audio, it will always show even if the sound is muted.

• access of entrepreneurs and employees of the web site in-house using clientless ssl vpn.

  We have a layout of web SSL VPN without customer who allow employees and suppliers of connection and internal display web page.  I wonder if possible separate employees and contractors to access internal pages.  The internal web page has no authentication of users.  They would like to see if it is possible that traffic employees get proxy behind interface INSIDE IP de ASA and entrepreneur behind a different IP address proxy traffic.  Thus, the internal web page can check IP to contractor and only give them access to view certain web page, but not all pages.

  Hello

  Creating a group policy for each user group will be a good option, you can also use DAP to assign an ACL web to the user who logs on the portal without client, you can use the Radius, LDAP or Cisco attributes to associate the DAP for the user. For example, if you are using LDAP, you can create 2 groups separated here for employees and entrepreneurs and based on the LDAP user group membership, they will be assigned to specific web acl configured according to their access restrictions.

  You can follow this link to set up an acl of web:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa83/asdm63/Configura...

  Once the ACL is ready, you can follow this guide to configure the DAP Protocol: "check the web for acls figure10.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Thank you, please note!

• Add the user to access DCUI using PowerCLI

  Hello

  Is anyone know how to add user (instead of root) in advanced access DCUI in ESXi5.1 of VMware using cli power setting?

  In addition, I read the Article below and it does not work.

  Thank you

  https://communities.VMware.com/thread/449969

  You mix the Whole-VMHostAdvancedSetting and parameters, and Set-AdvancedSetting cmdlets.

  Use the Set-AdvancedSetting cmdlet, it is discouraged.

  Something like that

  New-VMHostAccount - ID MyUser1-password MyPassword1 - UserAccount-Server MyESX1

  $dcui = get-AdvancedSetting-name ' DCUI. Access-entity MyESX1

  Game-AdvancedSetting - AdvancedSetting $dcui - value "$($dcui.)". (Value), MyUser1 "-confirm: $false.

• RE blackBerry Smartphones: Blackberry Curve 8520 - problems with the update of the ID and unable to use AppWorld

  Hi, I have a 8520 and managed to install protect and created a blackberry for that id and everything has worked well.

  When I go to App World, I get a screen notifying my ID must be updated and I click on install and I get an error contacting the server Blackberry ID.  Appworld then closes.

  The result is that I can't navigate Appworld and download apps etc.

  Please help, I looked at some forums that offer to remove the ID software, but I can't find.  PPL have mentioned, it is a bug, and I notice that a lot of these issues on various forums.

  HUMZAZN,

  Check out this thread:

  http://supportforums.BlackBerry.com/T5/BlackBerry-App-World-General/error-80003-cannot-access-BB-ID-...

  Maybe this will help...

• Unable to connect to server vpn behind ASA 5510 with windows clients

  Hi all

  I've seen a number of posts on this and followed by a few documents of support on this issue, but I'm totally stuck now, nothing seems to work for me.

  This is the usual scenario, I have a VPN windows 2003 Server sat on the lan deprived of our ASA 5510 firewall, and I try to get my Windows XP / 7 laptop computers to connect to it.

  Within the ASDM:

  (1) Server Public created for Protocol 1723

  (2) Public created for the GRE protocol Server

  3) created two public servers have the same public and private addresses

  (4) the foregoing has created config Public Private static route in the section NAT firewall

  (5) rules to Firewall 2 also created above on the external interface for both 1723 and GRE

  When you try to connect, I get the following entry in the debug log.

  6 August 6, 2010 17:09:37 302013 195.74.141.2 1045 1723 ChamberVPN-internal built ride connection TCP 1889195 for outside:195.74.141.2/1045 (195.74.141.2/1045) to the inside: ChamberVPN-internal/1723 (XXX.XXX.XXX.XXX/1723)

  but nothing else.

  The server shows not attempting a connection so I think I'm missing something on the firewall now.

  Also inside interface there is a temporary rule:

  Source: no

  Destination: any

  Service: IP

  Action: enabled

  This should allow all outbound traffic only as far as I know...

  Any help would be greatly appreciated.

  Chris

  Hi Chris,

  ASA newspaper indicates that the connection is interrupted because of "syn timeout. This means that asa receives no response from the Windows Server. Right now, we need to clarify some points.

  1 - your vpn server committed a correct default gateway error or the path that lies in your fw interface asa.

  is 2 - possible to start capturing packets on Windows Server. Hereby, we can get data flow information beetween client and server. And we can be sure that Windows Server wonders vpn.

  Ufuk Güler

• Unable to connect even after the user password reset

  Hai all,
  
  10.2.0.3 on Linux
  
  Reset a user password and the user is unable to connect as you can see below
  
  
  [oracle@testdb 10.2.0] $ sqlplus sys/Manager as sysdba
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:21 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  SQL > alter user sysman identified by oracle.
  
  Modified user.
  
  SQL > disconnected from Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  [oracle@testdb 10.2.0] $ sqlplus sysman/oracle
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:32 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  
  Unable to connect even after the user password reset

  Check
  How to change the password of the database user Sysman (DB control repository schema) [ID 259379.1]
  EMCA 11 g fails with the error "ORA-01017: name of user and password invalid; connection refused"and" username/password invalid name; For DBSNMP or user SYSMAN"[ID 741530.1]

• Rename the folder to the user files

  In Vista, I can't rename a folder of the user.  This computer used to be used by someone else, and I can't rename the folder so everything I do Gets the tag with his name on it.  I changed the name of the computer and log in name.  Can I change any other user except this one folder.  Any ideas how to rename this folder?

  It sounds like a problem with permissions for me (he does not resemble a corrupted profile) - you try to use its files under your user name and the system wants as his user name.  The solution is to give your full user name to all records in his profile and then to take possession of all the files in the profile - then you will have the rights you need.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product).  This should also give you access to open and work with all of the files in these filders, as if they were in your file.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  You can also create a folder in your profile named username of the other person and move the files in this folder.  He needs to pick up the permissions and attributes of the new folder (YOUR user profile folder) and you won't need to go to his profile whenever you want to get one of his records.  You may still need to change the permissions and/or ownership if you do this - it would be just to make things easier and quicker to access.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / A +.

• Entered by the user: equivalence with Qlineedit or QtextEdit

  Hello world

  My question may sound strange to you, but I start in the world of Blackberry programming and I use the C++ language.

  How you can make an entry by the user, with Qt I use Qlineedit or Qtextedit, but I can't find any equivalent in BB native Development Kit?

  Can you give a link or an example to learn how to make an entrance (string, int, float...)?

  Thanks for your help!

  Hello

  He does. Almost all the Cascades QML classes are accessible from c ++.

  Both cascadescookbookqml and cascadescookbookcpp in the first repository above projects do exactly the same thing - but in QML, the other in c ++.

  Thank you.

• BlackBerry Smartphones unable to use fancy smiley applications

  Hi all

  I installed applications fancy smiley and when iam trying to use this app while e-mail he invites me "" your current coding of SMS do not supported smileys.please go to options-> SMS-> datacoding and assign UCS2 "...." " I followed the same but unable to use fancy smiley applications... Please guide me.

  Thank you best regards &,.

  Karthik. M

  After you follow these instructions to set the code UCS2, did you do a reboot of the device?

  • Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.