the user profile service service doesn't have the logon, user profile cannot be loaded
I can't sign until administrator, ergo, cannot apply fix
If you used the recovery partition on your HP Compaq, you put it to how it was when new.
You cannot reverse that.
And if you have used non-destructive reinstall HP, you have used their data backup instructions, not Microsoft.
You need to ask HP related to your data.
And if it was a destructive reinstall, you must Recuva, etc..
You want to say "Recuva", not to recover.
http://www.Piriform.com/Recuva
Good luck with your data, because if this does not work, you should contact the data recovery experts and they are expensive.
See you soon.
Tags: Windows
Similar Questions
-
I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
The user profile service has no log on. User profile cannot be loaded
Windows 7. I get the message user profile service failed the log on. User profile cannot be loaded. I followed the instructions on the link, but it seems not to have worked. This is the administrator account that gives me the penalty. Only, I could get by using safe mode. Help, please! This is a brand new with Windows 7 pre loaded, computer I did hardly anything on this computer to give me a problem like that.
Thank you!
Since this is a brand new computer, it would be proactive to test at least the hard disk and RAM to make sure they are good. Fleecy material can cause this problem. Just because the computer is new does not mean that the material cannot fail. Indeed, if the material is going to fail, it will usually do fairly quickly or go for years. If any material is bad, assert your warranty immediately. If the material is good, it would also be advisable to ensure that the computer is free of viruses/malware because the infection can also cause the problem.
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
http://www.elephantboycomputers.com/page2.html#Removing_MalwareOtherwise, this error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.
1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.
2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.
3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:
NET user administrator / Active: Yes [Enter]
[Note: do not enter the brackets!]
If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. Or you can make a bootable DVD of Windows 7 repair of the file on this link:
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/
Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.
Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.
4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.
5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
There is a line for each profile. If a profile is bad, check:
(a) that the name of the key does not stop in ".bak" (remove .bak If it)
(b) that the RefCount value is 0 (change it if it is different)
(c) that the State value is 0 (change if different)Make the necessary changes, close Regedit and try to connect as this user.
6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!
Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:
Start Orb > Search box > type: cmd
When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:NET user administrator / active: No. [Enter]
Exit the command prompt.
General recommendations for creating users in Windows 7
You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
MS - MVP - Elephant Boy computers - don't panic! -
Is impossible to turn on the guest account. Cannot create new user account. After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon. User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically. For the most part, they seem to assume that there is a guest or a new profile in the first place...
The system is Win 7 Pro 64-bit with all available updates. I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...
There are no entries in the registry for a guest or a new standard user account. The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate. Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
S-1-5-18 = system profile
19 = local service,
20 = network service,
21 long numbers + 1004 plus User1 (admin),
22 long + 1005 plus 2 user (admin),
23 plus long + 1006 is user3 (standard,
and no comments or additional profiles appear.
C:\Users includes
All users,
User1,
User3,
By default,.
Default user (which is inaccessible for me, even as an administrator),
Public,
User2,
No guest or additional profile appear.
All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption. Having both a default value
and a default user folder seems hokey.
I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.
Help? Ideas?
This message contains the strange solution.
[Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]
- - - - - - - - - - -
Plan h - while another user said that it was caused by a file Windows Live problem
This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon
You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].
..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].
I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.
This is the useful part where this user has tested the solutions proposed in this thread linked above: -.
This has proved to contain leads to a difficulty. Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.
It turns out that the answer of JDMICHAL May 17, 2011 contained this:
(1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
(2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
(a) make a right click on the file, open the properties.
(b) click the Security tab.
(c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
(d) click on the Add button...
(e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
(f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".After doing this for two files, attempt to connect to the account. He must undergo.
The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).
In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:
C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm
and
C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm
Thank you for leading me to this!
-
The user profile service has not logon. User profile cannot be loaded.
This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
user profile service service failed the logon.user profile cannot be loaded
everytime I try to log the error message above appears, as administrator of what s that keeps me from being able to try to solve
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I get the message "the service user profile Service has no logon. User profile cannot be loaded. »
Original title: cannot open a sessionI get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.
See if the following can get an admin account...
Go to Safe Mode...
Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.
Now, while in safe mode, you perform one of the following?
1 can connect to your account admin without the error message?
If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
If the system restore does not slove the problem, then use this tutorial
http://support.Microsoft.com/kb/947215
2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
If so, you are lucky. This is the built-in Administrator account.
There is, by default, no password.
It could connect and do the system restore.If the system restore is not enough, then perform the tutorial even as above:
http://support.Microsoft.com/kb/947215If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.
-
I use Vista Home Premium
- Windows automatically updated and turn off the power.
- I couldn't connect, it says that the service user profile service does not logon. User profile cannot be loaded.
- Then I deleted my user profile in SafeMode by doing: 'make right click on computer - properties - settings - advanced - user - deleted my old account profile settings '. There is no option for me to "keep my files."
- Then I managed to connect, I guess having creates a default user account? Because there is a new folder in C:\Users\, called (former name). (old name) - PC. In C:\Users\(old name), it is empty.
Now, all my original files are gone because I deleted my old user profile. The size of my c: drive-has not changed much, so I guess all my files are still in only my computer, it's just that I can't find their "PATH". How could I get re-navigate to all my files? I need them so badly.
Thank you very much for the one who can help me.
Hello
Log on as ADMIN and look in C:\Users where C: is the drive where the user folders.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
How can I solve this problem? I have Windows Vista.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
The user profile Service service has no logon. User profile cannot be loaded. error message
I just installed the three latest updates (04/27/11) and now my desktop computer says "the service user profile Service does not log. User profile cannot be loaded. "Does anyone have any suggestions. I now use my laptop because I was the only user on the desktop, there is no way to get on it now.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
User logon denied-"the service user profile Service has no logon. User profile cannot be loaded. »
When I try to login, I get "user profile Service service has no logon. User profile cannot be loaded. "What does that mean? How did this happen and how to fix it?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
The user profile Service service failed to connect. User profile cannot be loaded
I go through the motions of an administrator account and everything seems to work but when I try to use it the first time I get a message error "the service user profile Service could not connect. User profile cannot be loaded. When I look, there is no user under users profile. Some error logs says "access denied." How to operate?
Hello
· You have made no changes to the computer until the problem occurred?
I suggest you follow the steps in the link below to solve the problem you are experiencing.
-
Can't connect! "The service user profile Service has no logon. User profile cannot be loaded. »
I can't log on to my laptop. I get the message "the service user profile Service has no logon. User profile cannot be loaded. "Can anyone help?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
The user profile Service failed to connect. User profile cannot be loaded.
The user profile Service failed to connect. User profile cannot be loaded. Plus all the other user 5 passwords no longer work nor password records or profiles comments or PCL. Under Safe Mode, I am forced to reactivate the Vista operating system before use but cannot mode without failure. How can I get around this block?
I think you should check for malware. You will not have the particular malware that is mentioned in the following Article, but the Article describes in great detail to try to regain control of the computer. If regain you control, we hope, you can use system restore to go back ahead before the problem arose.
It would be useful to know what anti-virus software has been installed on the computer, as the ability to restore the system to function properly may be seriously jeopardized if you use Norton and some other software.
http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/
-
The user profile Service has not logon. User profile cannot be loaded. (I am the administrator)
The above message appears when I try to log in. He only started past today, for no apparent reason. I can access a different account on my computer, but that information is stored on my own connection. The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway). Help... I work from home so it's impossible to get anything done. Thank you.
Hello suestev,
Thanks for posting your question on the Microsoft answers Forum.
Please see the Microsoft KB article below for assistance with the error:
KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
"The user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215I have included several links that addresses the error message for the user profile cannot be loaded.
You profile might be corrupted and needs to be recreated.You can also check the tutorial to
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlGood thread on Technet dealing with corrupted user profiles
http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/How to fix a corrupted user profile:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxIf please reply back and let us know if these articles have helped solve your problem or if you still need help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How can I see duration of appeal?
I can't find any option to see time calls.
-
How to find the password to iCloud after restoring the factory settings.
My wife has an iPad. I stick with my iMac and had nothing to do with the implementation of its iPad. She had a problem recently that would require an update of iTunes. When the update has downloaded a message appeared saying "your iPad can't be up
-
Profile of crèche and external LDAP
Hello everyone, have a strange problem with 10.11 and 5.0.15 server. -Having connected the server to an external OpenLDAP server. -After making changes in the directory utility (mapping of the GernerateUID to the uidNumber) I see also users of.app -I
-
AMD Radeon HD 6490M Windows 8 - 32-bit driver
Hello. Need driver for AMD Radeon HD 6490 M on windows 8 (32-bit). Computer - HP ProBook 4530 s. Where can I take it?
-
sign of carnt in hotmail to receive an email
Im trying to connect to my old hotmail account and I forgot my password - ivei tride to re set my password it says only: > the Windows Live ID is incorrect... but it is the right 1... I don't connect to this acount never just made for my playstation