The works of extremely slow DB_REPMGR_ACKS_NONE policy

Similar Questions

• Convert a physical box 2003 Server vm and the VM is extremely slow. Trying to connect again...

  Convert a physical box 2003 Server vm and the VM is extremely slow. Trying to connect again...

  This is my first time converting a physical box to virtual. This is Server 2003. The conversion took place and I try to connect to the box now but it's so slow. Currently, he sat to apply personal settings for almost 10 minutes.

  My boss has converted physical to virtual several times before and never said that he ran into something like this.

  Am I missing something? Any suggestions?

  I think that it is always looking for active directory. the newly P2V'ed will operate all IP settings. Therefore, you will need to wait until it has expired, and then enter the IP that is (ip, dns and etc.) above. the other way to speed things up would be to disconnect your network and the thing that your OS to expired immediately.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Sharing network of Windows 7 64-bit problem: other machines may very well write, but the readings are extremely slow.

  I tried to access to the shared both directory a Vista and XP machine via cable connections and wireless to my Win 7 64 bit machine on the part and it is extremely slow to read, but not written.  Not only the directory never takes show all thumbnails, and then open a file that is a couple mb in size as a photo takes more than a minute.  However, if I try to write the same file sharing, it takes only 5 seconds.  This fine all worked until I went from the version release candidate for the final version a few weeks ago.  Shared directories exist on another partition for the relocation does not have their effect.

  Maybe it helps diagnose the problem... I just make a copy of a picture of 4 MB on the part of win 7 on my win xp desktop and it took about 1 minute.  I renamed the file on my desktop and tried to write to the share and it took 5 seconds .  Now, it's strange.  So, this is the bed that would take forever.  The Scriptures are fine, which also explains why my nightly backups on the part of win7 are very good.

  I have a machine to hit the share by using the name of the computer and the other using the ip address.  Both show the same problem...

  I also tried to access files using a mapped network drive.

  I can take a 4 MB file and just copy it on my local desktop and it takes about a full minute.  However, written the same file or even another file of the same size as the part only takes about 5 seconds.

  I ran the Windows 7 network troublshooter last night and used the troubleshooter for incoming connections and he says that it found a problem but that he could not fix and he really had nothing to help me.  But I think he sent the information in Microsoft... not sure.  Next time, I'm at home, I'll run again and try to put all the gross results that I could not understand in this thread.

  I've also updated my driver for the network card and redone permissions and actions several times.  The only thing that I can also say that something can highlight, it is that when I was using the RC of windows 7, I don't have this problem at all.  It was my first installation of Windows 7.  I reinstalled from the final version and all of these files already exist on another partition on the same drive.  I just had to move my public and directories user space on the D: partition and share everything.  Maybe the new facility with something on the existing structures of the file works well with the new facility of the former?  But this does not explain why a new directory and file that create displays the same behavior.  I'm thinking out loud a bit to see if it helps that anyone think that anything...

  I thought about it!

  At least for me, it was a setting in the Advanced tab of the network adapter.  I have a Realtek Gigabit network card and one of the places must have been missed incorrectly.

  I changed the 2 following settings to "disabled", and he immediately started working very well.

  Disabled IPv4 Checksum Offload
  People with disabilities large send Offload (IPv4)

  I have a suspicion that among recent updates of Microsoft for this driver he missed bad... but it was this or the latest driver from Realtek.

  Update:

  In other research I have narrowed it down to make it just the Large Send Offload value.  Is located on "activated" whenever I update the driver Realtek to the latest version.  If I then go and set it to "Disabled", everything works fine.

• Out of the window of extremely slow variables

  Hello

  export of data in the CVI2013 table view may be extremely slow. For example, to have data, as shown below (6016 elements table) I used the menu command output / ASCII to save table to a file on the local hard drive. It took more than five minutes...

  

  Hello Wolfgang,.

  It is a known issue, and we're tracking with bug ID 414568.  We will include a fix for this in a future version of LabWindows/CVI.

  Best regards,

• The encoding is extremely slow (slow speed export)

  Hi all

  I just signed up to CC for video editing. I've used a friends computer which has CS5 full set. It's been great. Very quick and easy.

  Has decided to buy a new powerful 6 core i7 computer and signed up for the new software CC - first Pro, After Effects, Media Encoder and Photoshop. All installed end

  I film and edit my son's football games. A typical football game 90 min would take about an hour to export an MP4 file from 1080p25 on my friends computer. Would also take a similar time to the 720 p version.

  Only, I did my first edition in CC and configure export 1080p25 and 720p25.

  What has shocked me, is that the estimated time to encode is more than 12 hours! What happened. How can this be? Sometimes the coach wants best but this time of waiting is crazy.

  How can I fix this slow time to code and back to a more realistic hour ish?

  Thanks, Bryan

  1 - moved to the right forum

  2 - more information needed someone to help him... Please click below and provide the requested information

  -Premiere Pro video Editing information FAQ http://forums.adobe.com/message/4200840

  3. exactly what is on the INSIDE of the video you are editing?

  Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

  A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

  https://forums.adobe.com/thread/1070933 for instructions of screenshot

  Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• New Windows automatic update of August 10, 2011 is our extremely slow laptop. What should I do?

  The day before I had defragment the hard drive and do a "Disk Cleanup" after many months.  Laptop was significantly faster.  Then, there was an automatic update of Windows and now the laptop is extremely slow.   Any suggestions as to what I should do next?  Thanks to you all!

  Hello

  ·         There were several updates installed?

  ·         Have you checked the problem in safe mode?

  Check to see if the following is useful.

  Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

  Method 2: Log on to the computer manufacturer site and check if you have the latest drivers installed.

  See also:

  Increase the speed of the PC: optimize your computer, help your PC run faster

  Maintenance tasks that improve performance

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• extremely slow response on mac, used to work properly, the difficulty?

  No matter what I'm doing with TB on mac (OS of Yosemite, latest version of TB) it is extremely slow and unresponsive, tried uninstalled and installed again without success

  ewaisman,
  You still see the problem?

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Please help make the equivalent of a defrag on my Mac, as it is extremely slow

  my Mac is extremely slow, painfully slow in reality and needs a cleanup but I don't know how to delete it all waste such as cookies etc and help run faster.

  Help, please

  Cookies do not affect the performance of Mac, and there is no advantage in "defragmentation". Do not use any product that claims to "clean up" your Mac either. They are all scams.

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

  Determine if the problems persist also in 'Safe Mode':

  • "Safe Boot" or Safe Mode is a troubleshooting mode that bypasses all system of third-party extensions and only loads the required system components. Read about it: departure upward in Safe Mode
  • You must turn off FileVault before you start your Mac in Mode without failure.
  • From your Mac in Safe Mode takes longer that usual, graphics won't get smooth, audio is disabled on some Macs and some programs (iTunes for example) may not work at all.
  • Just from your Mac in Safe Mode does not solve the problem, it's to observe its performance without additional components.
  • To end, Safe Mode restart your Mac normally. Stop will take more time as well.

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Windows 7 is extremely slow to return to the screen saver mode.

  I installed upgrading Windows 7 on my computer and everything is fine.  However, when the system is idle and past in mode screensaver (with or without a password), the return of the screen saver mode are extremely slow (just a white screen).  It is sometimes quick, sometimes it comes back in 3-4 minutes, but most of the time it takes a long time.

  The system is a low end, but more than enough to manage w7.  It consist of:
  Pentium dual core (2140)
  2 gig memory
  NVIDIA 7300GT 256M

  I tried to delete the zone alarm security suite, does not solve the problem
  thought it was the HP 2610 print software, removed and still happens.
  update the bios (MSI p4m900)

  can someone figure this.  Is there something that prevents him to return to the desktop.

  Note that, I try to reboot from the blank screen by pressing the windows, right arrow, return.  But I think also, it does not address key strokes.

  THX

  I found a way to fix it! I did this:

  1. Press win + r and run msconfig. Go to tools and brand to troubleshoot the computer, and then click Start.

  2. then go to system and security and press electricityballance (not sure of the name in English because I have a Norwegian version..).

  3. restart your computer.

  4. my screen saver was not afterwards, but I gave it to display photos and now it works perfectly!

  When I checked the general tab afterwards, it did not have the checkbox to use the... start (a last..) one has been verified and the second has a blue full mark.

• Extremely slow after the recent updates.

  Nice day!

  After a recent update, my computer starts extremely slow for example, a file transfer time to initialize very low speed. No hardware changes have been made, and everything was in tact. The CPU usage is very low, but the computer does not respond, what the hell. Initially the system would be stuck on windows startup, but I waited until what he actually started upward because it usually takes less than 2 minutes to start. I tried system restore to restore to before the updates were installed and it worked! I wanted to just know how can I find out what update caused the problem or do I stop updating?

  Windows 7 Ultimate 64 bit SP1
  See you soon!

  Andrew

  Install all a test for signs of the back problem, you go. When you have identified the problem update and then use the correct way to remove the update or select Start, Control Panel, programs and features, see installed updates and follow the instructions under uninstall an update.