The Y510 GPU temperature

Similar Questions

• Satellite L500 - the GPU temperature high all in game

  Hi all

  I use a laptop L500 with the following:

  Windows Vista 64 - bit SP2
  Intel Core 2 Duo @2.1 GHz T6500
  4 GB OF RAM
  ATI Mobility Radeon HD 4500 Series.

  I followed my GPU temperature while performing a new game with the GPU - Z utility.

  As soon as I start the game the temperature rises of 65-70 ° C to 90-100 + C in 10 miutes. There seems to be a link between temp and performance, so when my temp fires the game fps drops dramatically. Whenever I alt tab the drops back to normal within a few minutes.

  My question is wheather this high temperature is ok or he says something of a cooling problem? If I have to clean my laptop I would expect a notable difference (never cleaned - was used for 18 months)? I read somewhere that updating my BIOS since v1.4 could possibly help, it's true and it's worth the risk?

  Any help and suggestions would be greatly appreciated.

  Thank you very much

  Hi Mirari,

  > If I clean up my laptop I would expect a notable difference (never cleaned - was used for 18 months)?
  Oh yes, you will have noticed a big difference if you use already for 18 months now and never clean it before. Normally, the laptop must be cleaned every 3-4 months and after this time and cleaning you will notice a difference that laptop will run much cooler again, but I have to say that I use my laptop every day.

  It of not difficult to clean the cooling system because you don t have to disassemble the laptop. All you need is a stream of air compressed to blow the dust from the cooling fans, as described here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]
  If you have any other questions, just post again :)

• Y480 GPU temperature raising

  I just bought Y480 a week ago... It's a great laptop with a great CPU and GPU for games...

  But I realized that the GPU temperature increases up to 90 * 85 ~ * celsius when it runs at full load...

  Is it normal to Y480 get temp all in game?

  or there is something wrong with my laptop?

  ' Welcome.

  max temp for most of the processors that I've seen is ~ 100. protection thermal, either the speed limit or shut down the system, you risk a little before that. When you arrive under heavy load, it seems that the fan is running at high speed? about room temperature, you use the machine in an environment conditioning or is the work of pc ~ 27 baseline c?

  in the end, if you are comfortable with the time you see, whereas it is a new machine that my recommendation would be that you contact and discuss options. If it's an older machine, I would say another interview.

  Kind regards.

• Sierra Messages App is forcing the use of the discrete GPU

  Since the update of my mid 2015 15 "MacBook Pro to Sierra, Messages.app requires the use of the discrete GPU and kill my battery time.

  All the world fell on this and if so, have you found a solution?

  Here, even with a MacBook Pro in early 2011... problem seems to be based on the new 'features messages"that you can use in iOS 10.

  From messages app, the internal GPU is used until I get a message with one of these new features to messages. Then the GPU will switch to the discrete GPU AMD and continues to work with him until I left messages app.

• Is it possible to know if my screen colors to the correct color temperature

  Is it possible to know if my Macbook Pro display colors to the correct color temperature?

  When I got it, it seemed hot, so I adjusted... .but how do I know if it is now right?

  Hello there, Chris.

  It seems you are trying to determine how much to calibrate the screen on your MacBook Pro. The following Knowledge Base article provides a few strides and the link to do this in the latest version of Mac OS x:

  OS X El Capitan: calibrate your screen

  The colors on your screen can be changed by many factors, such as ambient light, the position and the angle of the screen and the age of the screen. To take these changes into account, you can set your display to show accurate color using calibrator Assistant monitor.

  Calibrate it regularly to ensure accurate color.

  1. Choose the Apple menu > System Preferences, click view, and then click color.
  2. Click calibrator Calibrate.Display wizard guide you through calibrating your monitor, then creates a calibrated color profile. When the display profile is ready, it is automatically assigned in the color profile of your screen.

  Some screens have additional built-in color calibration and precision features. For more information, see the documentation that came with your monitor.

  Set the color profile of your screen

  If your screen does not look right

• Satellite P100 - 222 PSPA6E - when the new GPU driver will be available

  Hello!

  Me laptop Satellite P100-222 (PSPA6E), a GeForce 7900GS Videocard. Vista operating system is established. Display version 7.15.11.5666 driver.
  The driver are already obsolete, to some new 3D schedules it has a bad display of structures and so on.

  It would be desirable to learn, when appears in new display driver?

  Hello

  > when will appear in the new display driver?

  Who knows I didn t find any info on the Toshiba page.
  But as far as I know the many laptop models are equipped with the same graphics chip.
  Therefore, you can also try a driver for another model that was equipped with the same GPU chip.

  Welcome them

• Satellite M70: access to the data of temperature and fan

  While we did not have these problems with other laptops, we found a way to access the data of temperature and fan on a Satellite M70.

  A friend has tried this on Linux but have failed and also with XP I do not find a way to read data (current temperature of the CPU, or State of the fan-cooler).

  Given that I noticed several irregularities when using (the fan is that the CPU load is very minimal), work sometimes is going to be a little uncomfortable.

  Thanks for the advice / gw

  I put t know if it will help you, but in this ad, someone managed to run a control application of the material.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14284

  Maybe it will work on your laptop.
  But to my knowledge Toshiba doesn't support this request and I'm not sure it will work.
  Anyway, try it's free ;)

• How to activate the Intel GPU of 4000 on Satellite L850-10J

  Hello

  I would like to know how to activate my graphic card intel 4000.
  On the Device Manager in the graphics card menu I can not see the 4000 graphics card intel, shows me only HD 7670 M Ati graphic card.

  I did an update of my bios version 1.60.
  What is supposed to do?

  Thank you.

  Hello

  You want to switch between the internal and dedicated GPU. Right?
  You said that you have an ATI graphics card.
  For laptops that are equipped with the graphic chipset ATI something like that is not possible because not supported

  As far as I know, you can do so with the nVidia GPU support the Optimus technology.

• What is the acceptable battery temperature

  Are there standards saying that I should be concerned if the battery temperature exceeds beyond some threshold value. In the case of our Moto X play, what is the acceptable battery temperature.

  Answer to this question must respond to requests of many people in different forums and comments that cry on the Moto X play not hot. I use it for 3 weeks with normal use and a rare game here or there, I have not found it is hot. CPU - Z showed me the highest temperature of the battery around 35 degrees c.

  If the phone gets too hot it will stop before is damaged. I've never seen the official temp what when that happens however. If I had to guess it's probably around 125 F. It could be higher. I guess just right. I hope this helps.

• Not possible to use the Nvidia GPU both graphics primary source all the time?

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  brian1208 wrote:

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  To force an application to use your NVIDIA graphics card, right click on its shortcut (or an .exe file), point on run with graphics processor and select the NVIDIA processor high performance.

• ProBook 6570b - are the CPU & GPU extensible?

  Hi, I bought a refurbished Probook 6570b running Windows 7 Professional 32 bit. It seems it does not come with the cpu core but rather a celeron B840 1.9 GHz, not more, it has a discrete graphics unit.

  My question is this. The CPU & GPU are scalable?

  Thank you for taking the time to read this!

  The CPU is extensible. According to the HP product bulletin the following shall be supported:

  3rd generation Intel® Core™ i7 - 3540M (3.0 GHz, 4 MB L3 cache, 35W, 2 hearts) *.
  Up to 3.70 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i7 - 3520M (2.90 GHz, 4 MB L3 cache, 35W, 2 hearts) *.
  Up to 3,60 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3380M (2.90 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Up to 3,60 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3360M (2.80 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Up to 3.50 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3340M (2.70 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Up to 3.40 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3230M (2.60 GHz, 3 MB L3 cache, 35W, 2 hearts)
  Up to 3.20 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3320M (2.60 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Until 3.30 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3210M (2.50 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  Up to 3.10 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i3 - 3130M (2.60 GHz, 3 MB L3 cache, 35W, 2 hearts)
  3rd generation Intel® Core™ i3 - 3120M (2.50 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  3rd generation Intel® Core™ i3 - 3110M (2.40 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  2nd generation Intel® Core™ i3 - 2370M (2.40 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  Intel® Celeron® B840 (1.90 GHz, 2 MB L3 cache, 35W, 2 hearts) *.

  with a better processor, you also get some slightly better integrated graphics. If you want graphics discrete, HP supports the following graphics cards: AMD Radeon™ HD 7570 M with 1 GB of video memory dedicated GDDR5

• Lenovo Energy Management using the NVIDIA GPU

  How can I disable lenovo energy management to use the nvidia gpu? At the time, lenovo energy management has not used the nvidia gpu. Thank you.

  Already done with the problem. But my solution was however little stupid. I just used onekey recovery to return to the initial state and not to update my GeForce driver, now I use the stock 295.93 version.

• Reading the words of temperature controller fits using Modbus

  I'm working on a project that involves the use of a certain number of temperature controllers, Omega CN 7823 s.  The Protocol of communication for them is RS485 Modbus ASCII or RTU.

  I had a bit of trouble getting a job of communicating.  I think I do everything correctly in terms of setting up the initial communication parameters (baud rate, parity, etc.), but have been unable to properly read the values.  I am able to write values to operating records, but cannot read them.  When I try to read (using the code 03), the result is simply a multiple of 256 (if I try to read registry 1001 H, which is 4097 in decimal form, I get a result of 256).

  I'm running in ASCII at a speed of 9600, 7-bit data length, parity and 1 stop bit.

  Any help would be appreciated - I am attaching my VI and the manual of the controller.

  In the end it turned out that I had to create a property node to the VISA Instrument and specify the mode series RS-485/2-Auto.  This allowed the computer read the response from the controllers of temperature instead of simply reading the message that was sent to them.  I wish I had discovered this day 1, 2 or 3 to work on this problem, instead of the day 5.

• Precision in the reading of temperature PT100 and Module of NI9219

  Hello

  I m the temperature reading with a PT100, connected to the NI9219 Module. I put LabVIEW on mode 4 son RTD (PT100 range). I m able to read the weather temperature but I m do not know the right precision s or not. The temperature is between 25.5 and 25.8 ° C. Is this possible? I am able to do something to have more precision?

  Thank you in advance,

  Claudia

  Hi Claudia,.

  The specifications for the 9217 provide the absolute measurement accuracy Pt 100 RTD (3 and 4 sons) on page 14, it is not necessary to calculate [1].

  Since the 9219 is more flexible in the types of measures that it can bring, absolute accuracy for each use case is not provided. Instead, OR gives error of gain values and offset to be used for the calculation of the absolute accuracy [2].

  Follow this logic to calculate the absolute accuracy:

  (Absolute accuracy) = (entry reading) * (Gain error + drift in temperature) + (Offset + drift in temperature error)

  Reading the line "RTD 4-wire or 3 wire Pt 100" in the table on page 24, the error of gain and offset for a module between 20 and 30 degrees Celsius is ±0, 1% of reading entry for gain and offset sectors ±2400ppm. Drift in temperature comes into play when the module is outside the normal operating temperature, but for Pt 100, gain drift is ±15ppm and the offset of the drift is the ±60ppm (see page 25).

  So, for a module at room temperature 23 degrees Celsius and a Pt100 to 100 degrees Celsius using the 505 Ohm input range, the calculation is:

  At 100 ° C, the RTD would measure 138.5 Ohms if its temperature coefficient 0,00385 Ohm/Ohm / ° C, then

  Absolute accuracy = (138.5 ohms * 0,1%) + (2400 ppm * 505 Ohm)
  = 1.212 Ohm + 0,1385 ohm
  = 1.3505 ohms

  fracture of 0,385 Ohm / ° C, and

  Absolute accuracy = ±3, 5 degrees Celsius

  [1] NI 9217 Operating Instructions and Specifications
  http://www.NI.com/PDF/manuals/374187c.PDF

  [2] NI 9219 specifications
  http://www.NI.com/PDF/manuals/374473b.PDF

  I hope that I can help you with this information.

  Best regards

  SUSE

• Error loading operating system after shutting down the computer because of the high operating temperature

  I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.

  Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.

  Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."

  No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.

  I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.

  BT, I don't know what to do now. Loooking for suggestions.

  Hi Diadem1981,

  You can follow this link completely & check if the problem persists.

  Error message "Error loading operating system" when you restart your computer during installation

  
  Reference: How to install or upgrade to Windows XP

  Hope the helps of information.

  Please post back and we do know.