ThinApp 4.5 installs but doesn't start

Similar Questions

• SPORE on Windows 7 installs but doesn't start. Message says "Spore has stopped working".

  
  

  I recently bought the game spore original and installed on my compaq cq5320f. It installed correctly but when I try to run the game, the screen goes out for a second, then an error message box saying "spore has stopped working" it self closes and says windows is working on a solution and if it finds one, that he will let me know. the only option is to close the box.
  
  
  I tried everything, including a spoke with a representative from EA that had me do a start-up in minimal mode, of the United Nations and to reinstall and even suggested I buy a new video card: I did. I upgraded to the Radeon 4850.
  
  
  I am the only user on this computer and have had norton antivirus running on it every second because she was online. When I right click on the SPORE icon, it does not give my an option to run the previous version and the same error occurs when you try to run as an administrator (whose profile is already anyway).
  
  
  I am at a loss here. I know that's not the game, because I installed it on my laptop (running Vista) and it works fine.
  
  
  Please... help?

  Hey mervcasey,

  Please test this behavior in the new user account. Not sure if this will help, but it is worth looking at.

  Method 1:

  Create a new user account for testing purposes.

  For a full tutorial on the same, see: create a user account

  Method 2:

  If method 1 is the problem, you might be interested in this article to help with the same problem.

  Difficulty of a corrupted user profile

  Method 3:

  If both methods fail, please check your event log and see if there are any notable event that can help to shed light on the case.

  Reference:

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ShowUp plugins "Topaz" in Photoshop CC 2015 but doesn't start

  I uninstalled and reinstalled Photoshop CC 2015 as well as all my plugins "Topaz".  The plugins appear in Photoshop menu filter, but will not start.  All my other plugins of Imagenomic, Neat Image, Google etc. Nik work without a hitch.  I followed all the instructions from Topaz Labs also unsuccessfully.  Ask your question here, it's practically my last option.

  I have no doubt, there was a bug in the version of July 2015 2015 CC Adobe but I'm not sure that it was the sole cause of the problem.  My "Topaz" filters have always been in the 5th slot; so, if I understand the statement "Topaz", they should have worked from the start.  What finally worked for me was "Topaz", should (with the help of Support Adobe) manually uninstall Adobe CC 2014, 2015 CC via CC to uninstall/reinstall, restart my Mac Pro and reinstalling all my plugins.  My plugins "Topaz" resumed their place in the slot 5.  We smooth sailing for what is Adobe Photoshop CC 2015/Topaz has been since then.  However, as a result of doing that, I had a problem with Google Nik Viveza 2 suddenly stop working.  Adobe support told me it had to do with the fonts Arial corrupt and I was instructed to download and reinstall the police.  When I was doing this, I discovered that Arial (and other fonts) had been extinguished.  Just to see what would happen, I turned it back and Viveza 2 has started working again.  Finally, Google Nik must have updated their filters a few moments later because an Adobe CC 2014 Plugins folder which contained only the Plugins from Nik Google suddenly showed up in my list of applications.  I deleted this folder, after a consultation with Adobe, and all the plugins continue to launch and operate to this day.  Adobe needs to step up their game of quality control.

• Halo 2 installs on Windows 7 but doesn't start.

  Hello

  I'm running a Dell XPS 17 with Windows 7 Professional, a dual-core i7 2.7 ghz and a nVidia GT 550 m 1 GB graphics card. What happens is that I can install the game without problem but when I go to start the game, my mouse icon between busy then just go back to normal. I looked in my process in the Task Manager while you try to start it and halo2.exe would appear and then disappear just as if the process took end. I looked everywhere possible and saw several people with this problem, but no one seems to have a fix. Any help would be appreciated.

  Well, I've found a workaround. He has not been executed because when it is installed, I guess he thought that I had only the Intel 3000 gpu that has been integrated into the processor. So what I did is hooked up via HDMI to a monitor and then installed the game. HDMI only works off the coast of the nvidia card, so the integrated gpu has not yet come into play.

  I do not know which type of installation so you have this may or may not work.

• age of empires 3 installed correctly on windows 7 but doesn't start.

  I managed to install the age of empires 3 and age of empires 3: the Asian dynasties under windows 7, he had no installation errors but for some reason when I click to start the game until nothing comes at a time he told me to switch to a theme aero from the computer to a theme of basic computer and I did but it still didn't work I also have it reinstalled a few times

  Hello capo811,

  Step 1:

  I suggest that you try to install the game in Windows XP compatibility mode and then follow these steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Step 2:

  Access the .exe file for the game and make sure that it is running in Compatibility Mode (Windows XP)

  Step 3:

  Install the Patch 1.14 softwarehttp://www.agecommunity.com/gameUpdates.aspx

  If it still does not work, I suggest you run the game in Windows XP mode:

  You can install XP mode on your computer if you have professional, Ultimate or Enterprise Windows editions. Here is a link you can follow and which will give you information about this:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• ESXI 5.0 installs but won't start

  I bought a test computer to try to esxi and run some windows xp vm, the motherboard is Intel and Corsair SSD hard drive (pc is new), I performed the installation and it reported no network card which was an Intel onboard, so I bought a Sunix card and installation continued without error, but when I restart the machine It's as if there is no boot sector or operating system installed on the drive and it does not start.

  Have you changed the type of controller in the BIOS? When you use an SSD you to change AHCI SATA controller (or other). You also need to enable virtualization technology. Check the manufacturer's guide to activate that...

• Vista installs but won't start...

  Hello

  Recently, my laptop started to fail. Nothing occurred which gave me an overview of what has caused this, but it started freezing randomly after anywhere from 20 to 45 minutes of use. Simple tasks would become unresponsive. I had to turn it off manually in order to restart. Then, he got to the point where it would not even start. I ran a diagnostic and it failed on the hard drive. I ordered a new hard drive and tried to install vista 32 bit using the disc that came with my laptop. He installed after awhile but when it's over, he would simply sit at a black screen with only the cursor showing. I left it overnight to see if she would do anything, and he didn't. I then unplugged the computer (did I mention that my battery leave simultaneously load when all this started to happen) and the computer turned off. When I boot it it goes to the window loading screen with the little bar that cross in the middle. The bar moves for a second or two, then stop for a second and then continues and repeats the process. Stop going, are going to stop. So I guess my question is... WTF! Dell wants $ 50 to tell me what is the problem... It's cheaper. If anyone has at all no inclination who would, please let me know. Thank you.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Contact Dell at the link above or try their Community Forum here.

  Problem with the recovery media that comes with a laptop computer, contact the manufacturer.

  It is Dell Recovery, not Microsoft Media.

  See you soon.

  Mick Murphy - Microsoft partner

• ESXi 6.0 installs but does not start HP DL380 G7

  Hello

  I have a HP DL380 G7 server, I have 4 disks, configure a RAID0 array and created a logical volume of the sum of the disk 4 (2.2 to)

  ESXi 6.0 correctly installed and asks to restart, when restarts the server tries a different boot devices (network, etc.)

  I have tried F11 during boot and select to boot from the local disk, but the problem persists.

  No idea how to fix?

  Thank you!

  Thanks for your help!

  It was my mistake, check the Configuration of the Array utility there is an option in the main 'select the boot Volume"menu, selected my logical volume and here!

• Mysterious problem - HP DL380 G7 Server - ESXi installs but won't start

  Someone has already seen this? I have a new DL380 G7 server, I have 8 drives and installation with 2 bays, RAID10 (4 discs). ESXi 4 DVD comes from an ISO, I downloaded from HP (and have used on other servers as DL380 G6 without problem). The installation goes by at the end asks me to restart, and then I remove the DVD and restart. The controller, SmartArray P410 is defined as the boot device (there is one in the system) and I even try the F11 at startup and tell it to boot from HD... the screen is blank for a second then the server tries the other boot devices (network, etc.).

  I am really puzzled. During installation, the installer sees the two logical drives very well. I took LogicalDrive0 to install to.

  Thoughts? I'm puzzled.

  I agree with the suggestion of J1mbo . It is a good way to make sure that you install the operating system/ESXi on the expected logical volume.

  Another possible way to make sure that you install on the logical volume is created volumes with slightly different sizes. (I usually create one with only 10 GB for ESXi). In this way, you will be able to take the logic unit number in the Setup program based on its size.

  André

• Installer simply does not start

  Hi everyone, this is my first post

  Intel i3 with win7x64 I have a problem with the instalation of workstation7: it does not start! the event viewer does not record anything.

  Here are some details: after own win7 installed, everything works normally: workstation7 installs and works. but after a few months, he stops working, and then all I can do is to uninstall. then the installation program doesn't start. What is especially courius, is that at the same time windows virtual pc stops working too much, in the same way: Event Viewer stores nothing.

  Any ideas?

  Thanks in advance!

  Hello and welcome

  It would have been better if you asked before uninstalling.
  Maybe we could have easily fixed the "but after a few months, it stops working."

  have you installed third-party software like webcams, at that time vpn clients?

  OK - lets reinstall to-please read a howto I've done
  http://FAQ.sanbarrow.com/index.php?solution_id=1113

• Windows XP installation appears completely - but doesn't do anything.

  Hello!

  I just spent the last three hours trying to reinstall Windows XP (SP3) on a computer. I used a typical drive and ran through the usual steps.

  I choose to format the hard drive freshly install Windows. It took almost an hour and a half to get into shape, then a few minutes to do the installation.

  Then, it starts in Windows - nothing had changed. Installing windows system and old entire file was completely intact.

  What is the problem with that!

  Not sure why the format didn't work, I'd do a "full" format But before you start running Partition Wizard or one of the hard drive to write zerros disk utilities, which will remove any reminants of the previous version.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hard drive test - CD Bootable: (some utilities like WdDiag can write zerros to the first and the last part of the disk that should do the job)
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I downloaded cloud creative installation flie. It starts but after minute massage pop up: set-up creative cloud file is stopped

  I downloaded cloud creative installation flie. It starts but after minute massage pop up: set-up creative cloud file is stopped.

  Farthermore I can't uninstall already installed creative cloud. the massage says "this computer uses this file cannot uninstall.

  How should I do?

  After rebooting, it worked. Thank you very.

• RAM Preview doesn't start when simultaneous multiple images rendering enabled

  Hi all

  
  

  I have a problem with coating AE CC, with my new PC computer in 8.1 Windows pro 64 bit

  
  

  As the title says, my question is where Ram preview doesn't start when simultaneous multiple images rendering enabled. It starts really 8-30 seconds depending on the complexity of the project and the rendering is slower and jumps frames!

  12 cores with 2 GB of ram each.

  When I turn off the option of several images simultaneously made starts ok.

  but it's really very sad that I can't use this beast of a CPU to full potential. a new processor intel i7 5930 KB, 32 Ram DDR4 2.4 Ghz
  

  
  

  Advice and options would be very appreciated.

  
  

  Thank you

  Vonzar.
  

  
  

  
  

  
  

  
  

  Installation program:

  8.1 Windows Pro 64-bit

  CPU: Intel Core i7 5930 K 3.5 GHz Six Core Socket 2011 - 140W box 3

  GPU: nVidia GeForce GTX 970 4 GB DDR5 PCI - E

  RAM: 32GB DDR4 Non ECC CL16 2400 MHz Crucial Ballistix Sport

  Motherboard: Asrock x 99 extreme 6

  Using all 12 hearts ever sense. It is slow because the images I/O and disk cache kill all the bandwidth, and of course there may be effects and used features that simply don't work well with the MP.

  Mylenium

• New hard drive installed on Portege M200 but does not start

  I upgraded the hard drive in my Portege M200 from 4 GB to 80 GB using Parted Magic to clone the original disc. Cloning complete successfully, but instead of starting with the new drive, the M200 simply display a blinking cursor when turned on. Any help is very appreciated.

  TIA, update

  Hello

  Maybe you can try one of the below to solve your problem:

  BUT! ALWAYS keep a backup!

  Boot the system with a flexible BACK (with fdisk.exe inside) to restore the MBR by typing

  FDISK/MBR

  This works even on a SATA drive. Start alternative all Win2k or XP installation CD, go to the console command and issure of recovery

  FIXMBR

  See you soon

  Tom

• The following error during the installation of Windows: "cannot start Windows. A recent hardware or software change might be the cause.

  Help, please! Installing Windows Interrupted!

  Hi recently my computer was giving me a bit of concern for example (running slow, do not easily light etc...). A couple of days, my computer has decided not to put on after a glance on the net (on my other computer), I found I had a problem call KSoD or black screen of death, therefore I went on youtube and made all the different things said youtubers can fix this how ever none of these things worked, so finally I decided that I would have factory reset my computer/windows to using the system restore. However, at half way through the installation of windows after the factory reset (my computer came with no disk Windows), my computer has decided to remove what I believe to be called a blue screen of death, that this happened before and I thought it was part of the installation but when I turned my computer on he showed at the bios screen , but then it said 'unable to start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc and restart your computer. 2. choose your language settings, and then click Next. "3 click on repair your computer ' all this is very well apart from the fact that I do not have the windows installation disc. I'm stuck at this screeni however have a disc of windows 7 and that he was going to install windows7 after I got my vista Setup! but the only I see is the bio screen so I was wondering if there was some way I could install windows 7 from the bios or simply delete the entire half installed this error files windows vista from the bios screen? Please, any help is greatly appreciated. Or get a new internal HDD would fix the problem aswell?

  Hello

  You can check out the following link and check:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See also, how to start your computer from a Windows 7 installation disc or USB flash drive.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  Note:

  If the copy of Windows 7 is an upgrade, you will need to install a full version of Windows Vista and then upgrade to Windows 7

  I hope this helps!