ThinkPad E430 "battery is not installed.

Similar Questions

• Battery indicator indicates "battery is not installed."

  Lenovo SL 510 10mos old. "Recently, the battery indicator indicates" battery is not installed. Occurs when you use the power supply mains or battery only. Have the batteries removed and replaced, but still the same message. Power Manager shows also the battery does not exist. Operation is OK on battery alone, but I have no idea about the State of charge of the battery, time remaining, etc.. Is there any solution for this? The update of the firmware released 08/09/2010 will solve the problem? Help please.

  Tried all three. Patrick first Bishop: no change driver Hotkey: no change. Last updated firmware. Message: firmware update not required. Rebooted and flag State is back on and functioning.

  Thanks for your help.

  DOGMAN43

• Nine E430, battery will not charge?

  My E430 arrived in the mail today (yay!, love) but he know "non supported battery battery not charging" before installation and know the battery indicator says "11%, plugged in, not charging" is this normal? IM worried.

  Out the battery and restarted, seams it's working now.

• HP Pavilion 17 Laptop: battery connected, not charging AND battery unaccessable

  In recent months, at one point, my battery would indicate nn % (plugged in, does not support) and maintain this accusation so much it was plugged. Running on the battery, the charge would eventually diminish and in order to get the battery charge again, I went through the process of uninstalling the compatible battery control method ACPI in Device Manager. Usually within 24 hours, choses things would be back to plugged in, does not support. However, that is no longer to fix the problem. (When it was a question the indicator next to the place where the power adapter is plugged blue flash. Also, I upgraded from 8.1 to 10 a few weeks ago, but this question was held for a few months now).

  Now the battery is 2% (plugged in, does not support) and when I use the HP Support Assistant to check the battery, I get the message "control of battery HP could not access the battery. I did a hard reset, reset the BIOS and updated the BIOS, to anything will do. If I unplug the adapter, the computer turns off.

  Suggestions of additional corrections? I saw a further suggestion to perform a system recovery but I did not yet a recovery disk to win 10 (I don't have one for victory 8.1), and it would make a difference anyway since no plugged in, charging problem took place under win 8.1?

  Hi @shmay7,

  From the information provided, I think it's a problem with the connection between the laptop and the battery. It might be something wrong with the point of contact between the battery and the portable or to the battery circuit. It is better to have another battery, so you can try it with the laptop. The creation of recovery media should not be affected by the problem of power with the battery is not installed.

• Battery is not properly recognized on Satellite L500

  Hi all.

  I ve Toshiba Satellite L500 with Windows7. Two days ago a red cross appears on the indicator of battery and opinion: 30% available plugged in, does not support. Consider replacing your battery.
  And when I plug off AC Laptop stops. I replaced the battery but the same action when taken outside the computer AC stops. Don't run some antivirus programs, no results. I installed a battery tester who told me that the battery is not installed. Run the program CFS files not bad.
  Haven't tried with the Power Manager no results.

  My battery works well on other laptop similar.
  Pls help!

  Hello

  Remove the battery and start your laptop with AC power only. When the operating system is loaded, turn the battery and check if the battery will recognize.
  If this isn't the case, I guess there is a problem of electronic power supply on the motherboard and it should be checked by the Toshiba service provider.

• T60 - battery does not recognize universal charger

  Hello

  I bought a refurbished lenovo T60. It was fine, the first few days. Battery charge and so on.

  Then the charger/adapter has gone bad.

  I have a universal charger and I use it. The problem with him, is that battery refuses to charge him. If the charger is on,

  thinkadvantage Power Manager tries for a second, then the battery display of "battery is not installed. The T60 would go to the power, but does not charge the battery.

  Only when the charger is switched off voltage/a came out, the laptop is running on battery power. I have the chance to see the battery is running, but it would drain the battery.

  Please notify

  -Is the problem with do not use the charger of lenovo.

  -What I have to buy lenovo charger or an option by which the battery would get charged «universal charger»

  Thank you

  Siddhartha Roy

  Chargers no-lenovo usually charge the battery very well but I saw these cheap "knock-offs" heat while they ignite. I strongly suggest that you get a real. They are not expensive. If you have lived in the United States I could get it to you for less then $25 delivered to your door for 90 watt, or $20 to 65 watts. I imagine that they are still cheaper in Asia, in order to verify the costs on the local websites or ebay. Good luck and make sure you check their authentic before purchasing.

• T400s "battery not installed" after updating to Bios (1.20)

  Hey,.

  I have a problem with my T400s. It is a month and he now asked me to update the system software. I did it and it installed a lot of new drivers etc Inc. a Bios Update. (1.20)

  The problem is now, who can't see the condition of the battery. (The battery icon remains Gray and says "battery not installed")

  The work of computers very well (AFAIK) both on battery as power.

  I checked the thinkvantage Toolbox diagnostics and there I can see the State of the battery (for example, discharge, 48%).

  The latest versions of thinkpad power manager and driver ThinkPad power manager are installed.

  I tried restarting the computer and remove the battery for a while, it does not work...

  Someone at - it an idea?

  Have you tried to reinstall thinkvantage Power Manager?

• I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  Settle in the right forum.

• Keyboard ThinkPad E430 problem

  Hello

  I have a Thinkpad E430 (type 3254). It is around the age of 14 months. Yesterday, he randomly started having a problem with his keyboard. It acts like the Enter key is pressed continuously, and about 1 sec after clicking another button, it stops. The key entry by itself stopped work shorts and only sometimes and translates a continuous press.

  As soon as I start, enter has entrance and start normal is interrupted. If I press a key it is normal again until an operating system load. By example, if I start debian, line breaks get inserted between the console enter messages that are displayed until I have a press and if I boot windows, it gets stuck on the login screen that is given without the password, so a loop is executed. This problem also sometimes randomly while working normally.

  The keyboard has not yet seen use intense or any other drink spills. Usually, I keep the laptop at my desk and use an external keyboard. The last time I took it was 2 weeks ago.

  All the world is facing this issue before? I doubt, it may be a software problem, so I need a new keyboard?

  Thanks for the help.

  ook so that nobody knows or don't bother. Anyway, I solved it and I'll leave it here.

  I called lenovo helpline, and they told me to remove the power supply and the battery and then keep the power button pressed for 2 x 30 seconds. It seems that the drainage load static on the motherboard. It helped but only for a few minutes. Last night, I drained the battery at 5% and the question is now gone. I recharged to 100%, and the system is normal.

  I don't know what caused it, but it might have something to do with the power manager Lenovo, which I recently installed.

• ThinkPad E430 - unable to connect to a G router

  Hello

  I bought a brand new ThinkPad E430 (i3, 4 GB RAM) with Windows 8 64-bit pre-installed. While the machine works fine (my only complaint is a short battery life - only 3 hours or so on "Balanced" plan that contains no serious task on), he doesn't want to connect to my router, Asus RT - G32 (Rev. B1) (only B/G modes are supported).

  The router is 100% error free (I have several computers and phones on it and everything works fine), but my most recent computer does just not with it. It connects, but only "in part". Some Web sites to work, but after a while, they stop working, and Gmail Talk and Skype, for example, never connect at Wi - Fi access (on the cable, everything works perfectly).

  I've tried about every router configuration (channels, wireless "54G" only mode, the value change WPA to WPA2 connection, etc.) and I played with Win 8 care arrangements (N disabled mode, only G active), but nothing seems to work for more than a few minutes.

  Now, everything is by default back and I'm back on the cable.

  Somene please indicate if there is something else to try? BTW, I connected the computer to the N router at my girlfriends place, and it works well. Only, he refuses to work on my G router.

  Thank you and best regards,

  Henrik

  Hi again,

  Given that the computer works well on your girlfriend N router, the problem may reside in the technology of the router itself. The router you are using is running on a single 2.4 GHz frequency band, which was very common. So common, in fact, that there many things that can cause interference. Routers newer, such as a/b/g/n devices, use of 2.4 GHz and 5.0 GHz dual-band frequencies. The experience you had with the N Router makes me think that, to obtain maximum performance and the tip of your wireless experience, a router capability a/b/g/n dual band may be necessary.

  It will be useful,

  Adam

• MacBook Pro battery does not load

  Hi, I recently bought a NuPower OWC battery. I installed it in my MBP 13 ". It works great the first few days. I performed the cycle of charge/discharge, then noticed the other day when the use of my MBP and I plugged in the charger, when I clicked on the symbol of the battery it says "battery: no charge. I turned it off, and then after a while the light from GREEN to ORANGE charger. I loaded all night. Then the next day, same thing happen. "Battery: no current charging", but when I turned it off, it has been 2 hours since plugged in charger GREEN light does not change to AMBER. Is it possible that the battery is faulty?

  eannbelan,

  Try a Reset of the SCM: http://support.apple.com/kb/HT3964

  You can also try an Apple Hardware Test n: https://support.apple.com/en-us/HT201257

• Connected battery does not support 11%

  Question, that of why the battery is holding at 11 percent, hip but not load? I can do to remedy this? What may cause this etc... ?
  
  Early in the morning of 10/07/2016 shows 11% battery not charge.
  
  I plugged last night during the 9 p.m. Mountain time.
  
  After connecting, I was running Utorrent 3.4.9 of the overnight download of some files.
  
  A pilot plant was held yesterday 373.06 out ready driver NVIDIA GEForce game date 10/05/2016 - cost very spotless and without incident.
  
  I have two cables of load. Both worked fine yesterday.  Both are connected to a different location on a different circuit. Overvoltage protected by Belkin.
  
  Thank you, and here are my coordinates of the system.
  
  Name of the operating system Microsoft Windows 10 home
  Version 10.0.14393 Build 14393
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name XXXXXXXXXXXXXX
  System manufacturer Hewlett-Packard
  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  System SKU xxxxxxxxxx
  Processor Intel Core i7-4510U CPU @ 2.00 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.42, 18/03/2015
  SMBIOS Version 2.8
  Embedded Controller Version 77,53
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.14393.206".
  User name xxxxxxxxxxxxxx
  Time Zone MST
  Physical memory (RAM) installed 12.0 GB
  11.9 GB total physical memory
  7.90 GB available physical memory
  13.7 GB total virtual memory
  9.38 GB available virtual memory
  1.81 GB page file space
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hi @gdcgray,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you have a battery problem with an error "plugged in, not load ' and the battery does not fresh at all. It'll be a pleasure to help you with this.

  A remarkable work has been done by you by performing a basic troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  It certainly looks like the battery needs to be replaced. However, let's first establish that it is the battery and not the connector of battery on the motherboard that is defective controller.

  Please follow these steps.

  Please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and reconnect the charger
  • Please try to calibrate the battery.
  • Please update the bios from this link http://hp.com/drivers
  • Run the battery from this link: http://support.hp.com/in-en/document/c03467259

  Please run all the tests of components and if the battery is not please take note of the failure code.

  I hope this helps. Please let me know how it goes. I really hope that the problem is solved without hassle and the computer works great. Thank you for being a part of the community of HP. Please let me know if this can help, and if this is the case, please mark this message as a "'Solution Accepted". " Kudos would be also greatly appreciated for my efforts help. You can simply click on the ""Thumbs Up "button. "

  Thank you and have a blessed week ahead!

• Update the BIOS on a Tecra M5 - 386 when the battery is not recogised.

  My battery is not seen by my Tecra M5, but still fresh and feeds the laptop, I found info that offers as well as an upgrade of the BIOS might help, but the software update me gives an error message "[error] AC adapter is not connected, or battery power is not enough." How can I update the BIOS by bypassing the software security device? Told me on another forum that execution of the update .exe with /forceit BIOS in the CMD window that did not work. Can anyone help please.

  In most cases, the update of the BIOS does not solve battery problems
  Maybe the battery starts to malfunction because of age.

  I would recommend replacing the battery first!

  By the way; I guess the while the update of the BIOS error because of the software required missing; If you are using Win XP, then you must install page European driver of Toshiba common Modules. If you are using Windows 7 you must install VAP (value added package)

• My macbook pro battery will not hold a charge

  My macbook pro battery will not hold a charge. I took in an Apple reseller and claimed him install a new battery. He said that my battery was still good. I asked him to install a new battery just to have a brand new machine. With the new battery installed, the computer still will not hold a charge for very long. I got the Apple dealer and he ran several tests without conclusive results. I always have a laptop that will not hold a charge and must be connected to use for any period of time. Can anyone offer a solution? Thank you.

  Try a reset of the SCM.  System sometimes forget the management of his own material. Reset the management system (SCM) controller on your Mac - Apple Support

• New battery is not charged or recognized on my laptop satellite

  Hello

  I recently bought a new and said to be the original (on ebay) battery for my laptop Toshiba Satellie. I have aready replaced my battery once with no real battery that hold less then a year. However, I got the "no battery is detected" when I have insalled first battery, and now I get the notification ' Plugged in and not charging.

  I looked and tried several solutions found on the internet, including the re - install the driver ACPI battery and some ways to restart, but was not helpful. I suspect it has to do with my power adapter that is not in its best condition, or the battery itself is defective.

  I'd appreciate any suggestions.

  Thank you
  Eliya

  Hello

  I think that the battery is not compatible / incorrect or defective.
  First of all you n t need the drivers to operate battery
  So if you didn't have the same problem with the battery, then I would say that the battery is not ok.

  This means that you need test the other batteries...