«This computer running illegal Windows...» »

Similar Questions

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, run the Setup again.

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hey Abraham G

  you use discs of recovery that are made for your brand and your computer model

  and if you have problems using the manufacturer's recovery disks, you will need to communicate with them about

  It's their recovery process not microsofts

  Walter, the time zone traveller

• Can this computer run 64 bit?

  I'm going to buy a Dell Optiplex 745 and wanted to know if this computer can run Windows 7 Pro 64 bit.  Here are the specs.

  4 GB OF DDR2 RAM
  Processor Pentium D Dual Core
  750 GB hard drive
  ASUS ATI Radeon HD450

  Can only run a 64 bit OS?

  Also should I be worried even obtain 64-bit?  What I use my computer for is Minecraft, YouTube and Twitter.  I don't know the difference between 32 bit and 64 bit so if you could also explain that it would be greatly appreciated.

  Yes, he is capable of 64-bit:

  http://Ark.Intel.com/products/27515/Intel-Pentium-D-processor-915-4m-cache-2_80-GHz-800-MHz-FSB

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller. Also, if you decide to switch to Windows 7 64 bit in the future, there is no way to upgrade from 32-bit Windows, clean install only.

• Cannot repair this computer automatically in windows 7

  Whenever I try to start my computer it tells me Windows boot using the Startup Repair. Whenever I do this it says that it cannot repair this computer automatically. In the details of the problem, it reads

  Signature of the problem:

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:121 problem

  Signature of the problem 05: AutoFailover

  Signature of problem 06: 1

  Signature of the problem 07: NoRootCause

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  I always did this whenever the computer automatically updated. I can restore it, but then it just updates later that day here. Help, please!

  Original title: update Windows 7 send my computer in Startup Repair every time

  Hello

  Please contact Microsoft Community.

  I understand that you are faced with the question on the Startup Repair.

  I will definitely help you with this.

  I suggest you go through the link below:

  See the suggestions that were marked as answer in the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/all/startup-repair-cannot-repair-this-computer/718e1c0c-A907-404e-b48e-700e4e65c248

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Message "do you want to allow the following program to make changes to this computer?", in windows 7 "

  I just got this new laptop, and I got tired to remove my accout paswsword so I have things that him... and now every time I try to change things it appears: "do you want to allow the following program to make changes to this computer?  It then invites me type an administrator password and then click Yes. and there is no space to type my password... and also I can only except the No. I can't insert a cd... I have HELP lol

  Access is denied.

  now what? He still does not

  This happens because only Bikesh T jumped an essential step on many machines. Here you go:
  1 log in under an administrator account.
  2. click on start.
  3. type the three letters cmd in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET user administrator / Active: Yes

• Number indicating that this computer runs slowly and asking if I want to move to the base to improve the performance of windows.

  Using the operating system Windows 7 Pro with sufficient available memory and a hard drive that is partitioned with a couple of terabytes completely unused.  I have three monitors, but rarely actually use more than one.  Suggestions as a probable plan of action for the error message which, like summer, which occur frequently in recent months?

  Happens to me all the time and I'm not even running aero (I have Windows 8).

  If you are satisfied with the performance of the video, let it go. If this troubles you, get a better video card...

• I've been using this computer from dec 2010 all of a sudden I wake up a pop that says that this computer running windows genunie not how to fix it?

  I follow the instructions using windows 7

  Hello

  I am happy to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• help me get this computer running right again

  I download something for movies and I caught a virus. Cannot get into safe mode on the computer is because you enter the password on a black screen with writing and windows will light up and then u press ok and Office lights.  When I was working on the computer, I went to control the classic display, I saw like three icon, which were in boxes with three points of color and the rest were right.  I know I have a virus and anything could happen.  Download malware bythes but able to get into safe mode.  help help help help PS he saided 14 threats there.   Delete them but my computer got a virus and do not work.

  As you can not start the computer with reliability, use a working machine to download Windows Defender in offline mode.

  Download the 32-bit version or 64-bit appropriate here http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline?SignedIn=1&SignedIn=1 and burn a CD. Boot from the CD and run a full scan.

• I BOUGHT A DELL OPTIPLEX GX270S DESKTOP AND THOSE WHO OWNED THIS COMPUTER IS MICROSOFT WINDOWS XP PROFESSIONAL DISPLAY ON THE MAIN SCREEN AND ME TOLD THE NEWSPAPER ON. ME REQUEST USERNAME AND PASSWORD, CAN SOMEONE PLEASE ME SAY WHAT I HAVE TO DO? __

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • Help me rebot my windows xp professional

  Contact Dell > telll them the serial number SN: > ask them to send you recovery disks.

  They do it for a cost of $ small.

  Do a clean install of the operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• why I can not install my printer driver on this computer laptop w/windows 8? I have the lexmark disk.

  I can't install the printer driver for my printer lexmark 2300 on the my new HP laptop with windows 8.  I have the lexmark installation cd.

  Hello

  Probably the CD was born before Windows 8 is why he knows nothing about this product "nice". Please visit the following site. Hope that your printer is still the list:

  http://support.Lexmark.com/index?page=content&ID=OS27&locale=en&UserLocale=en_AU

  If so, you can download driver from here, it is a product of Lexmark.

  Kind regards.

• Windows could not set up to run on the hardware on this computer.

  After getting a new hardrive, I used the recovery disks. Once the three discs are finished, it goes to "Please wait while Windows continues to set up your computer" then a few minutes later it rises, "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. Is there a way to correct this error without lose more money?

  Hello:

  Try to make your own Vista installation disc and see if you can get Vista installed in this way.

  If you are in a fault light but rewarding, you can make your own Vista installation DVD so you can read your Vista on the PC 25-character product key.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• I get a pop up that says that this computer is not running windows genunie

  I've been using this computer from dec 2010 all of a sudden I wake up a pop that says that this computer running windows genunie not how to fix it?

  I ran the Diagnostic tool suggested 1.9.0027.0 with the following results:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {DA3A44EE-3695-4C81-B47E-4DDD8B7E01C7} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {DA3A44EE-3695-4C81-B47E-4DDD8B7E01C7}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-2417642685-859074727-1096029795Gateway NV59 Phoenix Technologies LTD.V1.09 20091126000000.000000 + 0002E813E07018400FC04090409Central Standard Time(GMT-06:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800006-02-1033-7600.0000-3092009
  Installation ID: 002943852626818405599325422933479754348716776080198466
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 7QJB7
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 06/08/2012-13:58:07

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 8:6:2012 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LAAAAAEAAQABAAEAAAABAAAAAgABAAEA6GEQYILD3hFU8Zi87L/p774oXF0 =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CALPELLA
  HPET INTEL CALPELLA
  START PTLTD $SBFTBL$
  MCFG INTEL CALPELLA
  SLIC ACRSYS ACRPRDCT
  SSDT PmRef CpuPm

  Can anyone help?

  That usually fixes 80% of these symptoms. I just got an email with another possible fix.

  E-mail repeated here
  Another possible remedy for machines that do not respond to the
  Update the drivers of fast storage Intel - the symptoms seem to be
  identical in a report of MGADiag
  This list of incompatibilities of file that we know so well can also be caused
  by a 'locked' CATROOT2 folder - the solution is usual
  Rename the CATROOT2OLD file and reboot
  Unfortunately I do not know how to rename this file for sure. Now, I'm trying to find out.

• Cannot display state of the last scan on windows Defender. Not available error - operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator

  Original title: problem with Defender

  Dear Experts,

  Windows Defender, I cannot view the status of my last scan.
  He says not available, it is saying the operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator

  What doi do

  Hi marneylou,

  (1) do you use the computer as an administrator?

  (2) is your computer connected to a domain network?

   

  Restart the computer, run the windows defender analysis and check to see if you can view the status of the last scan.

  Step 1: Stop and restart the Windows Defender service. To do this, follow the steps below:
  a. Click Start, type Run. (You can also use Win Key + R)
  b. type services.msc
  c. right-click Windows Defender service and click on stop > then start

  Step 2: You can see the steps mentioned in the article below

  Troubleshooting of Windows Defender

  http://support.Microsoft.com/kb/555957

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows is unable to complete the installation. To install windows on this computer, restart the installation.

  INSTALLATION OF WINDOWS FOR THE FIRST TIME

  Hi, I am using the windows 7 Home premium with Sony Vaio netbook.  This message appears when I've been windows installation since it is newly purchased, "Windows could not complete the installation. To install windows on this computer, run the Setup again"when I click ok, and then the computer restarts automatically and then come back to this message. I reboot several times but the result was always the same. Home premium to Windows 7 has been with the netbook already, so I don't have the Disc... can someone help me solve this problem? Thank you very much

  My colleague has had a similar problem when she came back to the States with a new Vaio from Sony, I didn't just run recovery and reinstall Windows and its worked good since. She even gave me a hug for fixing.

  The problem seems to be the OOBE which would suggest its more hardware than windows, but I understand your nature, you want to be right about everything.