Timeout in the middle of the test - Hex 0xBFFF0015

Similar Questions

• VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Hello

  We use LabView to control a sequencer of high-voltage (HVS448LC 3000 D) LabSmith using LabView drivers from the manufacturer, power supply. Everything works well in our program (attached) until we try to use another program on the computer at the same time. For example, if we try to open a window for our camera, or even a folder in Windows, the program gives the following error:

  1073807339 error has occurred in the CITATION read in FromHVS448.vi-> CommandHVS448.vi-> RegulateVoltage.vi-> Gated timed injections version 06.the vi

  Possible reasons:

  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  We would like to be able to control the camera software and the power of LabView by using the same computer, but we do not know what could cause this problem. We would appreciate any suggestions! Thank you!

  You should really put a lot of orders of pre-instrumentation in parallel.  Force an execution order by using the wire of the error.  Serialize all commands to the instrument.  You may have an order interfere with one another.

• Error (Hex 0xBFFF0015) time-out in NI VISA test panel when you try to play the system

  Hello

  I try to control the position of three valves actuator of four lanes of Garland. They are VICI Valco and model # EUHA. I connected them via RS - 232 to USB in my computer. I was able to communicate with them, when I sent a few simple commands through hyperterminal and when I open MAX devices appear and the sign says the devices are working properly. However, when I go in the test panel and try to run some of the default commands, I get timeout error, 0xBFFF0015, during the reading of the order. Thanks for any help you can provide.

  To get your LabVIEW code, you right-click on the control/string constant and select '-' display Codes?

• How to change the position of 'you passed the test?

  Hello

  I need help on how to change the position of the message "congratulations, you passed the test. Perhaps the failure message.
  It should be in the Middle, but now to the left, it sinks in the background.
  I Don t see where to change it. All of the index are adjustable but it escapes me...

  
  Thank you very much!

  I think you are talking about the area of control on the slide to score? Move this area result or score slide himself slide.

• NavigateToURL works during the tests, but not upon publication

  Trying to create a hyperlink simply in Flash.  Works perfectly during the test.  But when I download from the net, by clicking on the link takes me to www.thirdnewhope.com/iamtnh.blogspot.com rather than just www.iamthn.blogspot.com.  I tried to change allowscriptaccess forever.  It does not either.  I'm puzzled :-(

  AS3 code:

  button_1.addEventListener (MouseEvent.CLICK, goClick);

  function goClick(evt:MouseEvent):void {}

  var url: String = " " http://www.iamtnh.blogspot.com ";

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_blank");

  }

  HTML code:

  < div id = "flashContent" >

  < object classid = "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width = "560" height = "400" id = "events2013" align = "middle" > "

  < param name = "movie" value = "events2013.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-[if! IE] >->

  < object type = "application/x-shockwave-flash" data = "events2013.swf" width = "560" height = "400" > "

  < param name = "movie" value = "events2013.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-<! [endif]-->

                      <a href=" http://www.Adobe.com/go/getflash ">

                          <img src=" http://www.Adobe.com/images/shared/download_buttons/get_flash_player.gif "alt ="Get Adobe Flash player"/ > "

  < /a >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  < / div >

  disable your Blocker for popups.

• Keystone Kops to the test center... Real world Test candidate experience

  Had to sit the old 1z1 - 117 tuning sql beta 10:30 today... little ut review whirlpool got a lot abreast on the subjects.
  
  Anyway got the old bus beyond the battle of minden, in the Test Center on the 2nd floor... about a mile east of the old town of dalek... Although wikipedia seems not know that!
  
  ... Problem: the test center seems all locked up.
  
  .... At least there's someone else there also... He used before and he knows its on the 2nd floor.
  
  .... There is a test Pearson VIEW center on the 4th floor... only does car apprentice pilot things or something... but he gives a contract to Pearson view number and says 2nd floor nowt to do with him.
  
  ... but it gives a form of Contact of view Peason is optimal.
  
  But back to the stage 2... It is a phone number on the door... then we it sounds... it says that invigulator is sick that the review has been postponed at 13:30 (thanks for letting me know!).
  
  So I resisted the Wetherspoon and opted for pantry Becky.
  
  Triggered the incident 2045511662 with Pearson view that this really isn't on (luckily I had order number with me!). . Do a (beta) review between 13:30-16:30 after preping for 10:30, I'll be off peak.
  
  ......
  
  In any case receives a call from the GUY 11:50, saying it is on the way... so makes me feel better and that Pearson had communicated with him.
  
  .....
  
  13:25 arrives anyway, me and the other guys in the middle of trial... its still locked. He gives me his number as he wished to goto A.S.D.A. (wal-mart yanks) so I'll call her if it opens... but it is delayed by elevator having a pappy and goes doors opening - doors close... several times... and nice test center man then turned upward...
  
  In any case the man recording us in (photocopy worst agreement I have ever seen... I actually do rad these... only I do)... takes us into the test room, is me in front of the camera by the server... I smiled... and waits... and waits.
  
  Well it seems that the server of Stab City computers 830 is blue screening. Really, it won't start. He wants to give the blue screen of death. On several occasions. He wants to fix the OS Gates... Well good blue screens again. Ecc memory is up and down. The other candidate is called to help... but he aint going to get up even with V - stuffed in every port. I guess reinstalling the ram might help... but I think it's a recycling work. Too bad it wasn't youtubed.
  
  ......
  
  Finally, everything is abandoned.
  
  .....
  
  Well, given another number of Pearson view and rings... said to ring back and postponed to the next working day... that is to say Monday. I ask for the incident, but he refused and indicates that it is necessary to sort on Monday. Hmmmm. I could have sat twickers but MOM theres the issue of traffic on the ground at B-ingo... etc.
  
  .....
  
  Well, I'm on the price of tickets for the test in addition to the lost day Center. So I'm not impressed. Still, I'm looking forward to organizing a reschedule Monday for my SQL tuning. That said many samples centres will not open outside the school College dates, probably because the support is a little more difficult.
  
  .....
  
  Upward revising for subjects to review was helpful... even if I mostly used the book Lewis picked up on my desk and scummered and went on 11 GR 2 thoughly performance tuning documentation much more.
  
  ....
  
  Moral course of history. Bring 2 x 1 GB DDR2 ECC ram in the test center where their server is sick!

  bigdelboy wrote:
  .. .not my dish and chips, the and capaccino to Beccy pantry. 1.40 + 1.00 + 4.50 GBP.

  What. No tip? :)

• Disable the test pilot

  I just noticed test driver in the list of tools. I never loaded it. I also found that I was on the beta channel that I never accepted to be. I have loaded just release 23.01, but cannot remove the test pilot. It does not appear in the list of addons, so there is no option to delete.

  How can I get rid of this unwanted addon?

  On my old XP PC, kept for an earlier application only, I run Firefox 19.0.2 with updates disabled (never check the updates). Yesterday, an application of the test pilot appeared request an update for one of "my studies". Had no idea that this was therefore rejected. Arises once or twice more, so I looked for info and found this page. How she came in my non updated geriatric FF? Remove it now.

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well

  In 10 (64-bit) Windows, Deskjet D2360 prints the well test page, but the colors aren't any application (documents, photos...). Cyan looks like dark blue. Green also appears dark blue. I just updated the drivers from the HP website, but the behavior remains the same.

  The problem appeared after Windows 10 updates (January 2016 and later versions).

  Print and Scan Doctor couldn't fix it. Help!

  (Suggestion: If your printer prints the test page, why not propose an image file with what the test is supposed to look like.) This is useful especially to confirm colors. If I have a print test and see a few squares of color, how could I know if they are the correct colors?)

  After a long period of frustration, I found the non-professional magic solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/printer-prints-wrong-colors-after-Windows-10-update/TD-p/5242565/highlight/false/page/3

  Print a test page with HP print and Scan doctor. Once the problem is resolved.

• Will not print with the exception of the test pages

  I can't print any document (PDF or Word format) but all the test pages will be printed. The document will show less than a second in the print window then disappears. It doesn't matter if I try to print wireless or I plug the USB printer on the computer.  Also, no Google Cloud Print will print.

  The printer is a Photosmart C7280 all-in-one and computer is a HP Compaq nx7400. I use an operating system of Windows 7 with Office 2007.

  Welcome to the joalrabr forums,

  I understand your Photosmart C7280 print not since your connected PC or wireless USB however, it will print the pages of the test directly from the printer itself.

  First of all, I would like to run the HP print and Scan Doctor. I hope the tool will fix the problem. If it cannot, it will tell you the problem.

  Please let me know the results!

  Happy Monday

• Satellite A500 - HDMI never knit - error don't pass the test regza

  Hi mate,

  I come from Italy and, first of all, I want to apologize for my English... ^ ^
  I'll try to explain my problem:

  Whenever I try to connect to my Pc to my TV by HDMI port "Satellite A500'... an error pops up:

  _The tv is turned off or in standby or does not pass the test regza... _

  What it means?
  What can I do?

  Thank you

  concerning

  Hello

  As I know some of the Toshiba LCD TVs supports binding Regaza.
  This feature allows you to control the device (laptop, LCD monitor, etc.) using only a single remote control.
  But this only works if all devices support the link Regaza.

  If one of the devices (LCD or laptop) doesn t supports the link Regaze then you will probably get an this error message.

  Of course, you can disable this feature as well.
  I m not very well, but you should check the Toshiba applications preinstalled on your laptop (Toshiba assist, etc.). In addition, you should consult your manual for more details

• Soak the test?

  I read a lot in the news lately on this topic to come "soak the Test" and the rumors swirling around him that it may be Marshmallow:

  • Is - this Marshmallow?
  
  
  
  • How can I register for the test of impregnation?

  http://Phandroid.com/2015/12/11/droid-Turbo-soak-test-2/

  
  

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• Update ATML report header with the data collected during the execution of the test?

  I need to add data obtained during the tests to the report header (ATML TR5/6_Horizontal.xsl). I tried to implement all update features I've seen here, nothing done. I can get some added things if I do during the PreUUT, but I do not have these data. Does not work try the same commands (use the Parameters.UUT.AdditionalData container). I have not been able to get either the recall of ModifyReportHeader to do. Help and I saw others examples of support seem to be about half of what I need to this implementation. Any help is appreciated.

  -Randy

  Hello

  ModifyReportHeader would be the first thing I would try - what kind of problems did you have when you tried this?

  Have you read through the following knowledge base?  How to change a report XML TestStand header

  Kind regards

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K