Tip of power while using lightroom-not can not access the catalogs

Similar Questions

• Reinstalled LR 5.7.1. Now can't access the catalogs and develop the module has been disabled. [was: Please help.]

  I don't want to upgrade to CC LR6.  I have re-uploaded LR 5.7.1 last night, and now I can't have hundreds of my photos.  In addition, my develop module has been disabled.  How can I have access to all my catalogs and don't use NO of CC?

  Hi Pamelaa,

  Go to the location where the Lightroom Catalog is stored and try the most recent catalog.

  Also in Lightroom, go to file > open recent item and see if you have any other catalog here.

  And for the disabled development module, please see: module development disabled

  Let me know if it helps.

  Kind regards

  Tanuj

• How can I get assistance guaranteed while I'm not in the country of purchase?

  I bought the HP Pavilion 1220st just before leaving Istanbul, Turkey. And I started to use it in the Netherlands. In the second day, I experienced a few problems and I checked the hard drive. At this time, I saw bad clusters in the hard drive and on the third day, I lost the hard drive. Now I'm contacting HP service in Turkey, everything first, they directed me to service building in Istanbul. I don't always put the possibilities if I can get help in Amsterdam. I have not yet final sense.

  My question is whether anyone has similar experiences and know how I can get support while I'm not in the country of purchase.

  Sincerely,

  Recai

  Thanks for your reply,

  Service in Turkey directed me to communicate with the service in the Netherlands. After the communication I received today a new hard drive by UPS. I reinstalled everything with my recovery disks and now I am answering this post with my new computer . It seems that everything is working now.

  Recai

• 5.4 Lightroom can't access the page import: "internal error - could not find namespace: AgCreativeCloudUtils".

  I just installed Lightroom 5.4 (I use OS 10.10.2), and now I can't access the import page.

  The error message says: internal error - namespace was not found: AgCreativeCloudUtils

  Does anyone know how to fix this?

  Thank you.

  I thought about it. I used 5.4 but installed 5.7.1 so a simple reboot fixed it.

• I have a cc has photoshop & lightroom, but can not access the mobile app for my ipad, I get a free 30-day trial?

  I have a cc has photoshop & lightroom, but can not access the mobile app for my ipad, I get a free 30-day trial?

  Hi Michael,

  Please try the below mentioned steps to activate Mobile with Lightroom.

  • Kindly sign out and sign back into creative cloud on your machine: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
  • Please also synchronize lightroom desktop and mobile with the steps mentioned in the link: using Adobe Photoshop Lightroom | Lightroom - computer desktop and sync Mobile app

  Thank you

  Atul Saini

• How can I access the album artwork for printing. It is used to be simple, that now I can not find anything

  How can I access the album artwork for printing on a CD? It is used to be simple, that now I can not find anything

  (Retina Powerbook 15, OSX 10.11.2, Itunes 12.3 2.35)

  Right-click on the right track... Get info... Select album art... Drag it to the desktop

  print it from there.

• I am currently using Lightroom 4. I bought the IMac with the largest memory, but he has quickly filled. To conserve space on my computer, I bought a hard drive and I tried to get my lightroom back up there. (I don't know if I did it correctly or not

  I am currently using Lightroom 4. I bought the IMac with the largest memory, but he has quickly filled. To conserve space on my computer, I bought a hard drive and I tried to get my lightroom back up there. (I don't know if I did it correctly or not) Now, all my photos in Lightroom are "offline or missing", and I have no idea what to do next. Any help would be greatly appreciated.

  I guess you mean not memory and disk space, you want to clear space on the internal drive. Is this correct?

  If you have moved your photos somehow (this is not a backup), please follow these instructions to reconnect photos in Lightroom. Adobe Lightroom - find folders and files moved or missing

  In addition, you must (it is obligatory) make real backups of your database catalog and photos, that means accurate identical copies, made by a method automated and placed on a different physical disk than the originals. Lightroom allows you to make backups of your files of catalog on a regular basis, it is an option under the catalog settings. To make backups of your photos, you need some third party software to do.

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.

• I can't access the internet with IE 11 on my PC so I would like to download Firefox on my laptop and install it on my PC. I have been using Firefox on my laptop.

  I use Mozilla Firefox on my laptop and I would like to install it on my PC because Internet Explorer 11 stopped working. I can't access the internet so I downloaded the installer of Firefox on my laptop and saved on my PC. It initializes, but unable to connect to the internet to retrieve the program. How can I work around this problem and install your browser?

  Unfortunately, it did not work. I tried downloading earlier and it cannot connect to the internet. I need the program to install. I reset IE 10 as their recommended technical support and I even tried to reinstall, but that no longer works. I'd rather have Firefox

• Can not access the recovery on M30 partition

  Hi all

  I use a Toshiba M30. Last week, I uninstalled the old version of Norton Antivus to install the new version of Norton Internet Security. After you have uninstalled the NA, I found that my phone does not work normally. I, therefore, formated C pilot. Then, I could not access the recovery partition to reinstall the OS.

  How can I solve this problem?

  Thank you very much.

  CUONG

  Could you please be a little more clear on the problem.

  You try to use the recovery CD? Why did you format drive C? When you say that you can not access the recovery partition, how are you trying to access? through BACK.

  Sorry, but your question isn't very clear and a bit confusing. Thank you very much

• Tecra M5: Can not access the internet pages, but can ping in cmd.exe

  Hi all, this is confusing to me.

  I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

  -Intel Pro Wireless adapt
  -Drivers audio Sigmatel
  -nVidia graphics card

  Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

  I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

  I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

  I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

  Thank you very much

  MARC

  Hello

  According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

  Well, in your case I would first check the router settings and re still.
  In addition, you must reset the router.

  Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
  Please note that the TCP/IP protocol settings must be set to automatic.

  Check everything first!

• Satellite A110-277: can not access the internet wireless

  Hello
  I have a Toshiba Satellite A110-277. We have wireless internet access in our House and it was workin fine, but since a few days I can not access the internet. My laptop is certainly recognizing internet connection wireless, but through IE or Firefox it just does not connect.

  For some reason, he worked briefly through Firefox, but then that stopped. I don't see what anyone, I have done differently, other than (finally) updated Windows Media Player, but why would that cause problems, I don't know!

  I would really appreciate help as soon as POSSIBLE, that the internet is my lifeline to work!
  Thank you
  GcDh

  Hello

  You said
  > My laptop is no doubt recognize the wireless internet, but does not connect via IE or Firefox, it's just
  Hmm, I guess that you can connect to the WLan router and can insert the WiFi encryption key successfully right I'm right?

  How does LAN connection? Can connect you to the internet using the LAN cable?

  Feedback would be appreciated

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry