to access computers on adhoc network__

Similar Questions

• My wired network cannot access computers connected wirelessly

  Very strange problem of networking:

  Everything is Windows 7 and the network is defined as a working network.

  My laptop (wireless) can see and access my desktop (wired), but my desktop computer, although it can see my laptop, cannot access.
  If I connect the laptop cable, the Office can then access. I do not change anything, just plug in the cable.

  If also connected to my netbook with unusual results. The netbook runs Windows 7 starter and is wireless
  He can see the desktop and the laptop and access, but does not appear in its own computer network list in the Explorer.
  It is visible in the desktop browser, but are not accessible from it. It does not appear on the Explorer of the laptop at all.
  If I have the cables up to the netbook, the Office can then access it, but the netbook can then access the laptop if it is wireless.

  Just to clarify - netbook on wireless - I can access the laptop (wireless or wired)
  NetBook on cable (wireless or disable as well) I can still see the laptop, but cannot access it.

  When I first put this network - a couple of years - all spoken at all. I think I lost it after an upgrade of windows, but don't know when because I rarely access the laptop from the desktop, usually the opposite.
  Anyone got clues? Or how can I delete all networks and start again because I have a different network (same working group) on each PC name, but I can't change the names - windows seems to decide what to call them.

  Hello

  Thanks for the reply.

  I would appreciate if you can help me with the following information.

  1. what happens when you try to access wireless computers? You receive an error message/code?

  2. don't you try to access folders to disable firewall/antivirus?

• Cannot access computers running Windows XP Pro on wireless network.

  3 machines on the wireless network. 1 running Windows 7; 2 running Windows XP Pro.  Previously, I had full access in all directions. No problems.   Now I can't access Pro X machines. Neither the machine, Windows 7, or a XP Pro on the other machine. I can see XP machines in Windows Explorer with the complete display of all shared folders, but when I try to access a file, I get an error message. "\\Tiger\Documents and setting are not available. You might not have permission to use this network resource. Contact the administrator of this server to find the you have permissions to access. Not enough server storage is available to process this command. "(This is the message I get when I try to access one of the XP machines on the Windows 7 machine The message on a XP machine when I try to access the other XP is the same, except that the last sentence is "the network path is not found."  I CAN have full access to the Windows 7 machine is XP Pro machines. I checked the properties of sharing on both XP machines, and they seem to be the same when everything worked correctly. I have installed any new program - except the regular updates of Windows and the frequent update of the antivirus of Trend Micro. Any solution?

  Thanks Steven Winograd. I don't know how to frame a search that would have led me to the Article 177078, or that it applies to my problem, once I found it. I may have a new technique, but I CAN follow a recipe from Cookbook to change the IRPStackSize. Increase the value of 15 to 18 solves the problem without a further hiccup. Thanks again.

• Www to access computers on dmz

  I just installed the third ethernet port for a DMZ on our PIX 515 (6.2). This facility went well and I put a web server on the DMZ. I want to access the web from the demilitarized zone to get the fixes, but any system on the DMZ will not otherwise access the web. I thought that it is correctly configured with ' nat (dmz) 1 172.x.x.0 255.255.255.0 0 0'. Global (outside) command is defined for all users to access the web, but can't access the web in the demilitarized zone. What Miss me?

  Thanks for your help.

  Hello

  in order to ensure:

  -is the default gateway of the web server pointing to the ip address of the firewall's dmz interface?

  -is properly configured on the web server DNS?

  Kind regards

  Tom

• access to computers through internet - to know the IP address

  is there a possibility to access computers knowing for example the IP address and access to all his files, etc.?

  There are several ways todo this... others have already suggested some systems. Here are links to other simple configurations that can be useful...

  How to set up a personal web server home:

  http://lifehac.KR/2iLVCN

  Configure the server to Vista point to point Tunneling Protocol (PPTP) virtual private network (VPN)

  http://theillustratednetwork.MVPs.org/Vista/PPTP/PPTPVPN.html

• Impossible to share files on a network - "you are not allowed to access these files.

  original title: remote access computers

  I have 2 computers.  A PC in my office upstairs, a laptop computer in the family room on the ground floor.  I wish I could access on the computer to another without going through e-mail a file to myself a computer and opening and saving the file to the other.  I have searched onlline and through various Windows Vista books but could not find the right answer.  I get a "you are not allowed to access these files" (or something to that effect) whenever I try.  When I go to Windows Explorer and click on 'network', the two computers.

  Can no idea what I might be doing wrong or how I fix?

  Thank you.

  Hello

  You did changes to the computer before the show?

  You can check the permissions of the file or folder the file is saved in and appropriated:

  a. right click on the file or folder and then click Properties.
  b. click the Security tab.
  c. under group or user names, click your name to see the permissions you have.
  
  To take ownership of a folder:
  a. right click on the folder you want to take control and then click Properties.
  b. click on the Security tab, click Advanced and then click the owner tab.
  c. click on change. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. click on the name of the person you want to give to the property.
  e. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects check.
  f. click OK
  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx
  Note: applies to windows vista

  You can also check out the link and check if it helps:
  Connect to another computer using Remote Desktop connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  
  See also the link to learn more:
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

• Windows cannot access \\COMPUTER1

  When I try to connect to a working group, it connects perfectly. My laptop can 'see' all of the computers on the network, it is able to see the shared data and files from a computer that uses Windows Vista, but when I try to access the data stored on a computer that uses Windows XP, it will not work. I have two computers running Windows XP and when I try to access their data, I see the following message is displayed:

  Windows cannot access \\COMPUTER1

  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.

  Error code: 0 x 80070035

  The network path was not found.

  I use Windows 7 RC build 7100, but I make Windows 7 Ultimate lately in this month, so I really hope that I won't have the same problem there. But please, answer. I'd appreciate any help you can advice.

  Hi Jacob, P

  Thank you for visiting Microsoft Answers.

  Disable the firewall for debugging. If the firewall is the problem, you will need to configure it to allow access to addresses of "zone of confidence". Note that some firewalls must be completely uninstalled to prevent them from affecting your network.

  PING each computer by its IP address, and if successful, PING by name. You can get the IP address of a computer by opening a command prompt (DOS window) and by typing IPCONFIG.

  Check your Services are started on all PCs: workstation, DHCP Client, DNS Client, server, TCP/IP Netbios helper, computer browser.

  All computers must be in the same workgroup for the navigation computer to function properly. Sharing of print files & must be enabled on any computer you want to share files or printers. You also need to actually share the resource in question from the hard disk, right-click on the drive-> printer-> folder and select sharing.

  If you have problems to access computers that are visible in network neighborhood, make sure the computer access has an account with the same name and password that the computer connecting to it uses to connect.

  While the default NetBIOS setting is correct for normal network configurations, it is possible so that it can be changed, and it costs nothing to make sure that it is correct. NETBIOS over TCP/IP must be enabled for browsing the normal network.

  Please visit this link for more information on the networking of personal computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  I also suggest you to start in safe mode with network and check if you can connect to the computer.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• \\N-PC is not accessible. You might not have permission to use this network resource while trying to access the network computer

  Title: Cannot access computers on my network?

  For some reason any my computer won't let me access any computer on my network.

  When I try to open any computer, including mine, since the tab "network" on the left he gives an error message saying "\\N-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid.
  I ran the corner store to home group and network troubleshooting & two is out clearly said there are no problem.
  Anyone know how to fix this?

  Hello

  -What are the versions of the operating system installed on the conencted to computers in the network?

  -Did you do changes on the computer before this problem?

  Step 1: I suggest you to choose a network location, and then try to access the computer and check if it helps.

  Choose a network location

  http://Windows.Microsoft.com/en-us/Windows7/choosing-a-network-location

  Step 2: I also suggest you to check the network troubleshooter event logs to solve network problems and to check if it helps.

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Step 3: If the problem persists, I suggest you to follow the steps from the link and check if the problem persists.

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  For reference:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Step 4: Disable the Antivirus

  I suggest to disable the Antivirus/Firewall temporarily, then check the issue.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Note: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Hope this information helps.

• How to configure motorola nvg589 wake the wireless

  I am trying to set up a modem/router ATT Morotola NVG589 for me to wake up my Mac LAN to file share with another Mac or Apple TV via wi - fi.  I have 3 Apple Macs on my home LAN.  All running the latest OS 10.11.1 and are "wake on wireless" capable.  File sharing is enabled.  No problem to access computers on any other computer when they are awake.  When other computers are not sleeping, they are no longer seen in the side bar of the Finder of the computer that I use and the files are no longer accessible. I also have an Apple TV (3rd generation) who cannot access computers and their iTunes files when computers are asleep (awake is not a problem).  ATT was no help.  It's their League of the "technicians".

  Wake for network access requires Apple Hello sleep Proxy Service reside in the firmware of the router. The way it works is that your Mac records their presence on your local network before entering into sleep as usual. The router, which never sleeps, acts as a "proxy" for Macs and will respond to a request for remote network on behalf of a client by issuing a "magic packet" to the material of the Mac, which in turn he wakes up while the Mac can respond to the remote request. Periodically (about once every hundred minutes or more), a Mac sleep wakes up for a short time announce its presence on the network and then fall back to sleep.

  Although it is open source, I'm not aware of any router not Apple that incorporate this feature. If you are interested in further investigation, then ask Motorola if your router has this feature by name: Hello sleep Proxy Service.

• LaserJet 600 m602: Laserjet 600 too large print the number of copies

  I work at the public library, and we have a Laserjet 600 m602 to our public access computers to use. It is a network printer. We have problem with printer what impression of the office 2010 products, if more than one copy is requested printer will go crazy and print several copies much more than requested. The printer screen will say 1 X print the number of copies. Only way to stop it is to remove as many jobs he sees. It acts as if it were several jobs. We do not see this problem when printing from the Internet. Driver HP laserjet 600 M601, M602 M603 PCL6 HPCM600c. processor is set to WinPrint - Raw. Bidirectional support is disabled.

  Firmware is 2305090_000468

  I had already installed the pilot PCL6 universal and implemented to date to 600 M601, M602 M603 PCL6 thought that could be the problem but it has not fixed the problem.

  I would appreciate any help on this matter before going to is broken on paper.

  Thank you

  Melanie

  Solved.

  After a lot of research on reading and tests finally discovered the problem with drivers print and collate. Default settings for Microsoft Office 2010 and Adobe Reader are to gather if one that one copy is activated. For some reason any that caused printer to go crazy.  I tried the Standard driver and universal for the printer, but always had the problem of printing too many copies. I used the PostScript driver and it solved the problem.  Now just get the number of copies required. Thank you for your help.

  Melanie

• error starting after installing vista sp2

  I have a dell latitude D830 running vista business 32-bit.
  Installed Windows vista sp2 update and now the computer will not boot.

  automactically goes to the Startup Repair, but still not access computers.

  Can anyone help me please with this problem?

  How can I access the hard disk to uninstall vista sp2 update.
  Would not lose information on computer...

  Any suggestions or ideas on what I can

  Thank you for using Microsoft Vista answers Forum!

  You can start your PC in safe? If you can, go ahead and uninstall the update SP2 via Control Panel > Windows Update > view update history , then select install updates. Right-click on the SP2 update and select uninstall

  How to start in safe MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• My XP computer will not see my computer 7.

  I have set up my work network and made sure all the computers are on the same workgroup.  My XP computers saw the 7 computer beautiful day that I put in place now, they won't see the computer.  They are always on the same workgroup.

  Help, please.

  Hello

  Thanks for the reply with the status.

  Are you able to ping and access computers?

  Check out the link below to see if you can test two computers to establish a connection:

  How to test a communication with another computer?

  Hope this information helps.

• How I've implemented and acer under Win 7 homegroup that network running Win XP Professional?

  I tried to launch the set-up of the XP file and will not be installed.  I want to do is to be able to print from Acer.

  Salut Bill Badass,

  1. You are able to access computers on the network?
  2. How the printer is connected to the network?

  See the articles below and check if it helps.

  Sharing files and printers with different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

• ping request was not

  I observed a strange problem, I have a small work group based windows xp one of our xp machines has no ping response, for example when I ping from machine B to A ping is successful when I ping B to a ping and failure, then I checked the firewall on and off throughout ip address correct without viruses and spy goods found pls help me also I m impossible to browse a machine B machine

  Hello

  ·        Were you able to make a connection between two computers before?

  ·        What is the exact error message that you encounter when you try to access the computer?

  Method 1:

  I suggest you check in SafeMode with network you are able to access computers. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode with networking from the list and press ENTER.

  c. check to see if the problem persists.

  Method 2:

  I suggest to disable the security software installed on the system and check if the problem is resolved.

  Note: Once done the test, I suggest you to restart the system security software and check if the problem is resolved.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Remote Desktop connection logon

  I was able to use the remote desktop of Windows XP Pro. I have a computer in my living room and the other in the kitchen.  I can access computers from the other room .  What don't get me, is when using the living room computer for remote access to the computer in the kitchen, kitchen computer disconnects.  It is same for the kitchen for remote access to the living room.  I saw a remote technical support remote access to a computer and you can see them manipulate the desktop computer.  How this happen?

  They do not use the remote desktop connection for this - they use another form of support office automation tool.  There are several on the market that will do that.

  Remote Desktop connection resumes work stations, as you have seen and disconnects any account that is active at a time.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook