To access the works of fresh paint started on Windows Phone 8

Similar Questions

• InDesign test obsolete unable to access the work unable to buy as said buy unavailable

  Hello

  I started working on trial design in the hope of buying it when it expired and continue my work. However, to my horror when I try to buy it, it says not available for purchase in Sri Lanka as I am currently in Sri lanka, although I live in Sydney. Only after the expiry of the test I found that InDesign is not available for purchase in Sri Lanka. I tried for more than a week. I can't access the work that I did and now my deadline is near, I need to present the report. Within this week, can help you pls by extending at least from the trial. It's not my fault if I can't buy it here.

  Help, please! Would really appreciate your help. If I can at least access my folder, it will be ok I can finish it in another application.

  Unfortunately, we can not help you in a public forum. You will need to contact Adobe support by chat or by phone. Make sure that you are connected to your identification code Adobe click on the blue link:

  Contact the customer service

• What does the option, 2nd right, down the canvas of fresh paint do?

  I do not know how to make it any easier than this.  The first option (circle) reverses the last traces of paint, the next option (circle) put the paint back stroke and the 4th (circle) is to dry the paint on the canvas so your next color will not mix.  I don't know what option 3 (circle) is for.  I tried several times to see what will happen without any result.  A Yes, I know I'll feel stupid when I find, however, someone please tell me.

  I do not know how to make it any easier than this.  The first option (circle) reverses the last traces of paint, the next option (circle) put the paint back stroke and the 4th (circle) is to dry the paint on the canvas so your next color will not mix.  I don't know what option 3 (circle) is for.  I tried several times to see what will happen without any result.  A Yes, I know I'll feel stupid when I find, however, someone please tell me.

  ==========================================
  The following tutorial might be worth a visit:

  Fresh paint allows you to create masterpieces in Windows 8
  http://www.technorms.com/18136/fresh-paint-lets-create-masterpieces-Windows-8

  The following of the tutorial seems to address
  your question:

  ===

  "The bottom of the page also has a small set of menu items.
  From left to right, there is a button undo and redo. Unfortunately
  almost universal Ctrl + Z Undo does not in
  This app so it will be your best friend when painting, as
  We all make mistakes. The middle button is to hide the lines
  image and perform more than one painting of freestyle. Next is a
  fit to window button, so you can quickly zoom out and see the
  image as a whole. Finally, there is a dry button that deploys
  the paint. In this way, you're not autour galling when you
  don't want to - as a tool that you will learn to use a lot. »

  ===

  Also the following FAQ may be useful:

  Fresh paint FAQ
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/fresh-paint-FAQ/552a7366-fbd2-4b19-a4b8-4021453a4835

• Cannot access the drive Lacie D2 Quadra (1 TB), Windows says you want to format.

  Original title: my drive hard Lacie cannot be seen by Windows Vista

  I have a Lacie D2 Quadra (1 to) I've had for a year now, which worked fine under Vista until about a month when I did a windows update. Since then, he said, I had to reformat my hard drive. Needless to say, I don't want to do that. (I have all my files there) I tried it back before the update, but it still can not read the disc and still tells me to reformat.  I had a friend check it for viruses and found none and the drive worked on his computer. I ran antivirus on my computer and the drive and nothing. then check that the drivers are up to date... they are. can someone help me.

  Hello

  What is the stratus of the device in Device Manager?

  Step 1: Run the following article fixit tool and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Start, type msconfig in the search box
  b. press ENTER.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• Cannot access the HP laptop Bluetooth functionality after upgrading Windows XP to Windows 7

  Original title: reinstall the Bluetooth Driver

  I have a 32 bit HP under Windows 7 Pro laptop.

  My machine originally came with XP but when I upgraded the hard drive, I switched to Win7 Pro.

  I can't access the Bluetooth of the machine functionality.  It does not appear in Control Panel or Device Manager.

  HP broke off my machine, so their drivers are limited to XP versions.

  Any suggestions on how to reinstall a driver?

  Hey Parker,

  As you have upgraded to Windows 7 from your pre-installed Windows XP laptop, as the HP laptop is configured to meet the requirement of Windows XP operating system and it is better you contact HP support for an answer to the question and guide you in the right direction by following the links below.

  Contact HP:
  http://welcome.HP.com/country/us/en/contact_us.html

   

  Post your question in the Forums of HP Support:

  http://h30434.www3.HP.com/PSG/

  I hope that the information above helps you.

• The Kuler app will be released on Windows Phone?

  I wanted to connect to a feature request to the Kuler application to be released for the windows phone platform.

  Thank you all for sending this request.  I'll make this request.

• Cannot access the data of a dvd burned using Windows Vista

  Mr President.

  We burned a dvd using the integrated software disc Vista burning... the procedure was as follows:

  After inserting the disc, we formatted the disk by checking the "Quick Format" option... the format once completed, we pulled the folders n files that are supposed to be stored on the dvd n that the process has begun... After the end of the burn, the dvd is ejected automatically... but the dvd is not readable on other laptops or desktops... well helping... data are very IMP... We have no other backup data... and we have formatted the old laptop and upgraded to Windows 7...

  Forward to your response

  Kind regards

  Hitesh Baku

  How does the combustion process end - did you finish it or simply eject a DVD?  If you have completed it, exactly, that you have to finish?  What type of backup has been made (or did you use just copy/paste instead of the grogram backup) and what version of Vista are you using?  Did you use the live file format or the image ISO format http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html?  What kind of CD or DVD (CD, CD - R, CD + r, CD - RW, DVD, DVD - R,...)?

  Insert the DVD into the drive and go into Windows Explorer and right-click on it and select explore.  Any files or folders appear?  Go to start / Control Panel / folder opt / view on the and make sure that the button to view the hidden files is checked.  Also check the box to show system files and uncheck to hide extensions of known file types (this can be useful later).  Nothing now watch or it always seems to be empty.

  Go to start / Control Panel / administrative tools / computer management / disk management and check on the DVD in the car and tell me what it says on the size and the amount of available space (in other words, think data on the DVD).  Closer to your mouse on the DVD player and a text box appears above it lists criteria to this stationary player down.  Please post what he says EXACTLY, in the same order, as it is presented.  Does show as active for example?

  Here are the instructions on how to copy data from a hard drive to a CD.  Read carefully.  You skip steps or fail to wait until the processes were completed before moving on to the next step?  If we know what hurts you, it may be possible to fix it - but I don't know (because I have no idea, but why it happened). http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html.  Also, check out the following article, especially the section about closing or to finalize the process and see if you have done this http://windows.microsoft.com/en-us/windows-vista/Disc-burning-frequently-asked-questions.

  Here is another article on how to burn a CD/DVD in Vista to test to see if you followed the procedures as indicated or anything left side: http://maximumpcguides.com/windows-vista/burn-a-cd-or-dvd-in-windows-vista/.

  I believe that you have finished the session before it was finalized and it's the cause of your problem (assuming that Disk manager shows ALL the data on the dik at all - in which case I am afraid that the information was not stored on the CD/DVD and are not recoveralble, because there is nothing there to recover).  If the development is the issue, there may still be a way to finalize the disc - although I'll have to research further on this subject because I don't know how to finalize a disc that has already been ejected before it was finalized (and depends on what probably treat you used).

  ===========================================================================================================================

  Even if you have your drive formatted and installed Windows7, it is still possible to recover some of the data that was stored there using special recovery software.  I don't know if these programs work with Windows7 (it is a forum for Vista) but you can check the details before you download them or go to the Windows7 Compatibility Center to see if they are listed http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx.

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Here are some free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if it does not also the chances of recovery are very slim, but we invite you to try other options if you want)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  I hope this helps and I look forward to your reply with the results of the options I suggested, the I asked you to perform checks and questions I asked (and I know there were many, but I'm not here in front of your computer with the disk to try things myself so the only way I'm collecting information that I need help (if possible) is to seek your help for) help me.  Thank you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• To access the BIOS Setup on Pavilion G62 running Windows 7

  I'm trying to fix a virus Malware white screen and in the process, I need to be able to start my laptop from the USB key. By pressing "ESC" annoys me to the Start Menu and which lists "BIOS Setup" as F10, but I can't scroll down to this option nor the fact by pressing F10 (or any other listed functions) get no response.

  Am I being dumb here or the Trojan horse has disabled the ability to use the function keys. If the latter is there anything else I can try please?

  Hi Malcolm,

  It is always interesting to try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery for now) and see if the keyboard responds.

  Another option would be to connect a USB keyboard (if you have one available).

  If there is no change, can you post back with the complete model number and the laptop Nr - see here for a guide to the location of such information.

  Kind regards

  DP - K

• How to display the tasks and menu bar start on windows 7?

  Ive tried all to display the taskbar and start menu in windows 7, but nothing does.  Could you please help me?

  Hello

  Were there any changes made on the computer before the show?

  See the article and check if that helps:

  Show or hide the taskbar

  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-the-taskbar

• the premier pro does not start in windows 10

  Hello

  I have just updated to windows install 10 with a cleaning. Now, I have a problem with the Premier Pro cs5.5. It does not start correctly.  instead of the projection of the screen it goes to an empty p [the age with the bar tools, then falls, disappears. I was wondering if I have to do a re-install or there may be an update to make it compatible to windows 10.

  In addition to the comments of John, a few people with a new Adobe DVA are struggling to get them to open in Win10 but found that by double-clicking the program file, the Properties section and choose "run as Administrator", they had to operate. That said... Win10 and a number of video applications are not on the excellent conditions in any universal sense.

  Neil

• With the new 15.0 version, I am not able to access the program or my files. I need phone support like Apple, nor I can fix it!

  Hello

  Please take a look at the following document to see if it answers your question about finding the files that are stored locally on your device.

  How to manage files Acrobat DC for iOS

  Please let us know if you have any additional questions.

• I can't access the internet applications on my blackberry blackBerry smart phones

  Hello

  I have a blackberry curve 8520 then 5 when I try to use facebook twitter or blackberry world app on my wifi it doesnot and it give me a message that I'm not connected to a WiFi network

  ,,,,,,,,,,,,,,,,,,,,,,,,,

  Fix. In order to use them, even via wifi, you will need an active blackberry data plan from your provider.

  http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

• 'the disk check utility requires exclusive access to Windows__files on disk' (my hard drive). "Re-start of Windows. __

  FAILED: attempt recovery of bad sectors (disk hard C)

  I followed the instructions to increase the speed of the PC on the home screen of the box to highlight the function of microsoft.com.

  I could access the program successfully on my home screen (Windows XP Edition family version 5.1 service pack 3.0).  Phase 1 of the scan completed successfully, but about 70% through the phase 2, the analysis stopped and I got this message: "the disk check utility requires exclusive access to some Windows files on the disk.  These are accessible only by re-starting Windows. "   I was in charge of restarting my computer and repeat the test.  I did this, but got the same message several times in a row.

  I use the MS Update center regularly, my Windows XP software has been certified 3 times as being Windows genuine, and I update MS Security Essentials at least every 2 days.  I DON'T KNOW WHAT ELSE TO TRY!  As a general rule, ALL my other Windows functions work correctly & completely of my home screen.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Please contact me at * address email is removed from the privacy * with specific instructions.  I'll try the center of update every day, where you will find all items that can be downloaded to fix this thank you for your continued support.  Joy Knobloch

  UPDATE WE CHECK DISK: 2 responses of PML & TWELCH were marked as possible answers.  After you schedule a check disk and shut down your computer, you must WAIT an hour or two before starting.  There is perhaps a long line of users waiting to get their audited records!  I finally managed to get the disk to run check (I also checked the box that says automatically correct errors).  BUT I NEVER GOT A CONFIRMATION MESSAGE THAT DIRECTLY STATED THAT ANY "BAD SECTORS" HAD BEEN RE-COVERED.

  LAST QUESTION: Can we assume that if the disk check ran completely and automatically corrected "problems", that the "DEFECTIVE SECTORS" have been found?

  Thanks to everyone who participated in this forum.  E-mail address is removed from the privacy *.

  It is not clear what you were / are doing.  Try this:

  Start > run > chkdsk /f > OK

  A box appears with the following message:

  The type of the file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by
  process.  You want to schedule this volume t
  check the next time the system restarts? (Y/N)

  Type Y and press ENTER.  Then, restart the computer.

  If, during the process that follows, you still receive the message "FAILED: attempt recovery of bad sectors (disk hard C)" or something similar, go to the website of the manufacturer of your drive hard drive and download the appropriate for your hard drive diagnostic tool.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Unless you allowed to access remotely in accordance with a phone call to the support of MicrosoftTHAT YOU HAVE MOMENTUM, you must disable the remote access and Remote Desktop (right click on post work, select Properties, click on the 'Remote' tab).  In fact, you must disable these features now and only reactivate if still initiate you a phone call to technical support Microsoft and will need to enable them.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.