Sony DCR-SX85 memory

Similar Questions

• I can move video from Sony DCR-SR42 files to a memory stick?

  Please show me how to move a movie from a disk file to a memory stick Sony DCR-SR42 hard. Thank you.

  Location Memory Stick of the DCR-SR42 is used to record images and so it is not directly the camcorder can transfer files from the hard drive to a Memory Stick. However, once you have the camcorder connected to your computer, you can then move the files using your computer.

• PE9 ProjectPreset for Sony DCR - DVD308 Mini DVD VOB files

  I'm new to PE9 and I cannot bring widescreen widescreen video of finalized DVDs from my Sony DCR - DVD 308 in format.  The video on the handhelds is wide, but when I bring it in PE9, it opens a dialog box for the importer of video, I get the mismatch warning and he brought as a standard video format.  I tried several different presets, including 'NTSC-Hard Disk, memory Flash as Sony DCR camcorders' but to no avail.  The video that comes is always the standard proportions.  What I am doing wrong?

  Excellent!

  Sometimes, before (it is not the only one here) will miss the flag to display 16:9 wide in the header of the file. That's what interpreting the film. Same thing for the other AV file flags, such as FPS.

  Happy editing,

  Hunt

• Sony DCR-SR85 will look grainy in first elements 7

  I was using a Sony DCR-SR85 camcorder with a 60 GB hard drive. Latey I noticed that when I save my wife's horse in the arena the video seems a bit grainy when I down load it into prime Elements 7. I say grainy, but maybe it's not the right word. The pens have conducted horizontal and the pixels with the pipes to almost make a wave in the background. The horse looks very well in the video, I am shooting in standard mode, but is planning to go to high quality mode to see if that helps. I give work area in the calendar after I downloaded the video pre 7. He always looks a little weird every time you move anything with near multiple horizontal lines. (as a kind of enclosure)

  HI -.

  Your camcorder is what we called a 'hybrid' and can shoot in a variety of standard definition modes and levels of quality. It is difficult to advise you without knowing a few details.

  What mode are you? If you go to edit your video in Premiere Elements, you can shoot in HQ mode.

  When you set up your project first Elements, that project settings did you use? You must use the disc hard/Flash Memory Camcorder Project / Standard definition preset for this type of camcorder.

  How did you get the video from your camcorder to your computer? In version 7, you should be attaching the camcorder to your computer via USB, and then use the Media Downloader items first (tab organize, go to get media / AVCHD or other hard drive camcorder) to import the video into your project.

  Although, by nature, your computer will focus on your camcorder interlacing (which appear as horizontal lines) and these are not issues when you play your video on your TV, there are certainly graphic problems that are inevitable. As all videographers, know you should never shoot video of a person wearing a striped shirt or a person standing in front of Venetian blinds. Narrow lines produce a distortion called a moire - and if that's what you see, there is not much that can be done on that, with the exception, do not shoot, unfortunately.

• Rechargeable battery NP-FH40 model for model Handycam Sony DCR-SR42E

  Because I'm not able to find rechargeable battery NP-FH40 model for the Handycam Sony DCR-SR42E model in one of your stores in Delhi, what is the replacement battery model. Help, please.

  Hello. The H-series batteries have been replaced by the series V so look for a NP-FVxx. The voltage may be slightly different from the original battery, but this isn't a problem. The physical difference only is the size of the center of each side of the battery tab then you might want to try before buying just to make sure it fits. I replaced my series H with V series without any problem.

• Import media from Sony DCR-TRV355E

  I bought Final Cut ProX in part to change a large stock of video family based on Strip. Now, I find that my video camera Sony DCR-TRV355E, who has worked well with iMovie 06HD no longer works was FCPX. Entry shown in the video import screen but at the top right the legend says no signal of the device.

  After having scoured the manuals that I see that my camera is not taken in charge that is a great shot. Surely, there must be a work around?

  Would be very grateful for the help. Thank you

  FCP X treats D-8 camera as a device not controlled, no timecode.

  Try to use QuickTime X to capture.

  Al

• need help to connect my sony DCR-HC23 handycam to pc

  Hello
  IM interesting to connect my sony DCR-HC23 handycam to my pc, so I could save / change my mini dv.
  the cam has 3 exits:
  One - came out to connect to tv.
  second - a USB 2.0 A to Mini-B cable
  third a dv out.

  Since I don't have a dv out and im tring to connect the cam via cable usb but nothing happens.
  I have to fall on this page:
  http://www.Sony.co.in/support/FAQ/141031
  Ive downloaded and now windows (windows 7 64 bit premium) recognize somethnig but in the end, I get *! * to the Device Manager and it says the material used recognized.

  Anyone know what what should I do?

  There is no 64-bit drivers for usb connections. What we can do is upgrade to Windows 7 Professional that can run Virtual Windows XP mode

  http://Windows.Microsoft.com/en-us/wind... ws-xp-mode

  The USBDRVEN installer will work in Virtual Windows XP and
  install the drivers correctly and also a link between the installation of
  Windows 7 with a virtualization USB Driver Connector.

  I don't know if it will work properly with Windows 7 Professional 64 bit, because I have a 32-bit computer (IBM T60P
  ThinkPad running Windows 7 Professional 32-bit)

  Contact Microsoft and ask questions about your particular
  computer first before you upgrade.

• Video camera Sony DCR-SR68

  I bought a Sony DCR - SR 68 camcorder opportunity, taking nice videos. The problems started when I tried to connect the camera to my computer to download videos; the computer does not recognize the camera. I bought a new power cord patch directly to parts of Sony, but it made no difference. My question is this; It had to be a software CD provided with the camera when it was purchased new one would download on your computer so that the computer will 'see' the recorded video when you plugged into the computer? Any info anyone could send me would be GREATLY appreciated! Don

  So, I tried all the suggestions that have been given and; did not work. Unable to download Sony's suggested reading memories because my computer is Windows XP and download requires Vista 7 or more recent system. Have you tried the camera to the computer of a friend who is much more recent than mine but he has the last iteneration of Windows XP for the operating system, and it opened fine on his office, then that may of little help... Don

• Problem with SONY DCR-DVD650. Unable to get the finished videos transferred to my computer.

  Hello world

  I have a Sony DCR-DVD650... I also use the mini DVD - RW for recording.

  When I put the DVD in my computer, or you are trying to access via a USB cable connected to the camera, however there is no videos. I can clearly see the videos in the preview of my camera...
  I've also developed videos...
  Solution Explorer displays a single folder which is DVD_RTAV which includes 3 other files 'VR_MANGR. BUP', 'VR_MANGR. IFO' and 'VR_MOVIE. VRO.

  What I am doing wrong? And how to get these videos on my computer to be able to
  Change them. Help, please! Would really appreciate it, thanks

  The basis of the record that you have seen inside the disc, you saved your footage in [VR mode]. The DVD_RTAV folder that you found inside the disc is indeed the folder that contains your images, and you can go ahead and copy the contents of this folder. The more you can do with these files is to find a software that will be able to read. It is not possible to change them on a computer.

  To ensure that you will not work in this problem next time, please save your videos in the standard [MOVIE mode] instead of [VR mode]. Once you have done so, you will find your images in a folder named [VIDEO_TS], and you will be able to copy and modify these files.

  If this post answered your question, please mark "accept as a Solution.

• How can I connect a Sony DCR-HC21 camcorder to the computer from Windows XP to download / burn to DVD

  I try to connect the digital video camera Sony DCR-HC21 to computer Windows XP download from videotapes and to edit and burn to DVD.

  Have output DV on camera and input Firewire on computer. The computer does not recognize the camera device.

  Just reply to * address email is removed from the privacy *

  What happens when you connect the device to the computer?
  Do you get the ping of the adding new hardware?
  If this isn't the case, I suppose a defective component, maybe the cable, if some tests would be in order.
  Here along the list of things to look at.
  http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

• Computer doesn't see Sony DCR-HC96 camcorder connected by USB

  Running Vista Home Premium 32 Bit on DELL XPS 710.

  Impossible to stream video to Movie Maker, Adobe first Elements 3.0 when using the USB cable.

  All of the suggestions.

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  The computer doesn't detect camcorder Sony DCR-HC96 .

  According to the Sony website, the USB streaming is not possible with this device.

  See the site:

  http://eSupport.Sony.com/us/Perl/support-info.pl?template=&info_id=544&MDL=DCRHC96

  I suggest you send a query on the Sony support site for further assistance:

  http://community.Sony.com/?XID=M:header:eSupport

  You can always follow the mentioned steps and check if the device is detected.

  The device cannot be detected if the drivers are not properly installed.

  1. What is brand and model computer?

  2 have you checked in the different USB ports?

  3. are you able to use other USB devices?

  To check if the problem is with the drivers, I suggest you follow the mentioned steps:

  Method 1:

   

  Run the fixit:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: Reinstall the USB drivers

   

  a. Click Start, type devmgmt.msc and press enter

  b. now under universal serial bus controllers, do a right click on a device and uninstall

  c. Repeat step secondary universal b for all serial bus controllers entry.

  d. now, restart the computer so that all drivers are reinstalled.

   

  If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I can't download videos to my computer from sony DCR-HC22E hanycam

  My computer does not recognize the video from my Sony DCR-HC22E handy cam and therefore cannot modify any movie DVD etc.

  My computer does not recognize the video from my Sony DCR-HC22E handy cam and therefore cannot modify any movie DVD etc.

  ======================================
  I was wondering,... you connect to PC via IEEE
  1394 FireWire (Sony i.LINK) connection?

  The following items may be worth a visit:

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

• Sony DCR-TRV740 camcorder

  You will need to transfer loads of old family videotapes of Sony DCR-TRV740 for Dell XPS430 running Vista 32 bit.

  Transfer is OK with the older laptop (Dell Inspiron 8500 running XP) using the USB connection.  Can also change (slowly, poor quality) with Windows Moviemaker.

  But Sony says no USB driver available for Vista. Sony suggested Firewire iLink from camera to the PC, but the camera is not recognized in the Device Manager and therefore can not transfer them to PC. Tried to import Sony Movie Studio 9 Platinum ProPack and VS Video Recorder software - recognizes neither the camera.

  My question - is anyone have solution?

  Would upgrading to Windows 7 works? (Professional and ultimate edition both include an XP Mode)... Fees - but who let me use the driver XP Sony? or Firewire?

  Get desperate - have spent days on this skin.

  You have an analog source and a system that recognizes digital.

  If you happen also has a DV camera... the following articles may be the answer.

  Windows Vista - import analog video to your computer by using a DV camera
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Windows Vista - Toss on those VHS tapes
  http://Windows.Microsoft.com/en-us/Windows-Vista/toss-out-those-VHS-tapes-save-your-home-videos-to-DVD

  Capture analog video using a digital camcorder
  http://www.videohelp.com/dvanalog

  Using Windows DVD creation (Windows 7 and Windows Vista)
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00844627&LC=en&cc=us&DLC=en&product=3643454
  (scroll down and read the paragraph: import analog video)

  Another solution would be to buy an analog video capture device:

  The following link is an example so you can see what the material looks like...

  Adapter CARD USB - AVCPT USB 2.0 Audio video creator Capture DVD Maker Editor
  http://www.Amazon.com/SABRENT-USB-AVCPT-creator-capture-adapter/DP/B0011N9QNC/ref=sr_1_1?ie=UTF8&QID=1315664780&SR=8-1

  Find a search on Amazon or Google for analog video Capture device
  more examples.

• How can I download for my sony dcr-dvd403 pmb to windows vista 36 bit

  looking for software for downaloda pmb for windows vista for sony dcr dvd403 handycam

  looking for software for downaloda pmb for windows vista for sony dcr dvd403 handycam

  You have Windows Vista 32-bit and a Sony DCR-DVD403 with LCD 2.7 "...

  According to the Windows Vista for Sony DCR-DVD403 Compatibility Center the device itself is compatible without any intervention on your part.  Support for any third party hardware or software is always from the hardware manufacturer or software.  It is their place to ensure that their hardware and software are compatible with the operating systems their customers use (or not to do - put an end to their support for said product and basically stating that produced a legacy package/device).

  Visit Sony support web page and put in your camera model after you have selected the option for downloads, it takes a place where you can select various downloads.  Simply choose 'Windows Vista' in the menu drop-down "Select an Operating System.  Then it expans show several possible downloads to support this device in Windows Vista, including updates of Picture Motion Browser and Picture Package Sony feeding with their products.  Here are a few updates - so you will need to have a version already installed.

  Notes for the Motion Picture Browser declares, "this utility updates PMB versions 1.1 to 5.8.01 and Cyber-shot Viewer version 1.0, PMB version 5.8.02..."- so I think it is reasonable to assume that, as long as you have an installed version (from the CD that came with your camera), you can use this update to bring it up to State fully patched.  Sony offers a link if you need to buy replacement CD for those that you should have received with your product.  Wow - 30 USD - they are proud of their software.  You may have more luck that many others in the research that a download legitimate to PMB is that you do not have your original CD...

• Sony DCR-PC330 handy cam

  driver needed for a cam of hany sony DCR-PC330 for OS vista Home premium

  driver needed for a cam of hany sony DCR-PC330 for OS vista Home premium

  See a page of Sony driver for your Sony camera specific to http://esupport.sony.com/US/perl/swu-list.pl?mdl=DCRPC330&SelectOS=28. If after reading the driver for your camera, you have still problems, you're more likely to get help if you contact Sony or a Sony focus group.