Tool capture Windows 7 crashes ONLY when capture IE 10

Similar Questions

• Windows Explorer in Windows 7 crashes only when I right click on a flash drive

  I have searched online, I could and that you did not find a thing to help. I have 2 flash drives that I use on a daily basis and they both appear in my Explorer windows as usual. I can use them as I normally and transfer files and save their very well. However, every time that I click one of them to do anything - eject, rename, etc,-l' windows Explorer stops and restarts.

  I checked the flash drive drivers and they are up to date and I formatted them does not. My 2 TB external hard drive allows me to right click and rename properly, so he is reduced to flash drives. I can right click them on other computers, is only on this computer.
  Anyone know what could be causing this? In addition, this everything works normally so it's quite strange.

  You are welcome.

  Given that the problem has been identified, you can try to uninstall then reinstall Bitdefender and see if the problem is fixed.

  If the problem persists, you may want to consider posting the question on Bitdefender forum:

  http://Forum.BitDefender.com/index.php?ShowForum=311

  In addition, you can remove the C:\CrashDumps folder at any time.

  You can leave the intact additional registry key, but you can delete it if you wish, or run the following .reg file to delete:

  Windows Registry Editor Version 5.00

  [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
  

• Windows XP crashes intermittently when stopping. Stuck on the screen with the default windows background color and the mouse pointer.

  We are an OEM that systems of electronic Assembly is based, in our machine is a PC running Windows XP Professional that provides the interface for the operator. Some of our systems have begun to crash intermittently when stopping.  Up to now we have seen it on three machines.  There has been no change to hardware or drivers that we put on these machines.

  The PC is supposed to stop at the point were he said "It is now turn off your computer", but it hangs when the only thing on the screen is the default windows background and the mouse pointer. The mouse moves, but that's all. He is unresponsive to ctrl-alt-delete, or any other entry.

  This was reported 5 times, and in any case there's nothing in any log file which would tend to indicate where the problem is maybe.

  I guess we have a bad driver or device, but the problem only happens once all stops of 5-10, and only after the machine is turned on for a while.

  I just turned on the detailed status messages, but they did not stop the machine since.

  What I asked is: is it possible to get windows to connect to all events stop? I really want to know what he was doing when he stopped.  Can someone else think something I can look at, or a better way to debug this?

  Re: a suggestion on this new monitor to 'prove' is the source of the problem
  Disconnect it, connect a type non-ecran touch "ordinary".
  stop/restart in safe MODE, make sure that the old monitor is not appear in the Device Manager [what we used to call a ghost]
  If it IS, delete it & uninstall the sw provided with touch screen
  Reboot in normal mode
  Try a stop
  If you get the old orange it'S now SAFE, tell the seller about IT.

• Window.onbeforeunload works only when there is a return value

  The problem statement is want to run code only on browser close, refreshing the browser tab, tab close.

  Previous version of firefox used to run the code in window.onbeforeunload in all 3 events mentioned above, but now the code in window.onbeforeunload runs not on click Refresh and browser close.

  based on the discussion with the previous post, I kept back in this block. Now I am able to see the confirmation box. But now I want to execute the code only when clicked on leave of this page.can you please help on this. Thank you very much.

  An additional point is if I keep the code in the window.onunload code is not executed in the tab close and the browser, but it runs in the update on.

  Hi, I admire your persistence on this issue, but there is a bug that has the attachment that Gingerbread man named titled: "Bug 391834 - do not allow alert/confirm/prompt onbeforeunload and onunload onpagehide.

  It looks like its guests with disabilities and you try to make it work. But you also already solved this problem with a batch file in this issue https://support.mozilla.org/en-US/que.../993972?esab=a & s = & r = 0 & as = s so I this will mark as resolved.

• Windows Mail Crash / reboot when you dial

  Windows Mail stops and restarts each time while composing new email mail every time loser. Windows Vista Home Premium, Service Pack 2

  Log of errors like this, any thoughts?

  + System

  -Supplier

  [Name]  Application error

  -Event ID 1000

  [Qualification] 0

  Level 2

  Working 100

  Keywords 0 x 80000000000000

  -TimeCreated

  [SystemTime] 2014-07 - 14 T 12: 34:11.000Z

  EventRecordID 376880

  Application of channel

  Computer LaptopNew

  Security

  -EventData

  WinMail.exe
  6.0.6001.18000
  47918ed8
  INETCOMM.dll
  6.0.6002.18463
  4dbee731
  c0000005
  00069e11
  1400
  01cf9f5f46f4f590

  If you like Live Mail, but not other programs packaged with it, you can remove them.  None of them are required: you can install just Live Mail by itself if you wish.

• Windows Explorer crash exception c0000005

  Original title: Windows Explorer Crash

  When I try to create a portfolio of 'My Documents' explorer.exe crashes. He bagan when the Briefcase is not responding because Data Execution Prevention stopped the process. Then begins the Explorer window crashes. The application error message is that it generated an exception c0000005 at address 7E4DB9AA2(,nosymbols>). The following error - what the failing application, version 6.0.2900.5512, faulting module synceng.dll version5.1.2600.5512 explorer.exe. address failure 0x00001a11. What is my problem and how do I fix it. Please help me. I need to sync my files desjtop with my laptop because my laptop crashes. Now my office explore does not work.

  Thank you

  Nancy

  Windows XP service Pack 3

  If you have SP3 installed, you also installed KB938828.

  You can read here all the things that are included when you install SP3 (including this update), so you shouldn't have to install again.

  If you get the DEP errors, I suspect a third party extension of the Explorer.  If someone offers you make an exception to DEP for Explorer, this is the wrong idea.

  DEP errors occur when XP shuts down an application because she feels threatened by the latter.  XP should never feel threatened by his own substance - like Windows Explorer or Internet Explorer.  If XP gives you an error DEP of one of these applications, something is wrong with them and the best thing to do is to understand what the problem is and fix it (or I guess you can just start to try things and maybe get lucky).

  Also, we are not a 'thing' on your system, what makes blind troubleshooting especially a roll of the dice.

  But, let's see how you go with this idea of clean boot and optimization of the Microsoft Support Engineer and you can check if this may help.

• Where can I find the Print Screen or tool captures Windows XP?

  I'm in an online class.  The subpoena calls for us to use the Print Screen or tool captures Windows 7.  My computer is Windows XP.  Where can I find these tools in Windows XP?

  XP is not a cutting tool. You will need to use the print screen button with MS Paint which is a real PITA bread. I suggest you download one of these freeware tools and make life more simple.
   
  PrintKey 2000 free
  http://www.Sharewarejunkies.com/00zwd2/printkey2000.htm
   
  Gadwin PrintScreen
  http://www.Tucows.com/preview/419481
   
  PicPick
  http://PicPick.en.softonic.com/
   
   

• Download the capture tool for Windows to my Windows 7 Starter program?

  On Windows7 Starter came with my laptop that the Alt - print screen does not work is a downloadable Snipping Tool.available?  Or is there someother way to save a screenshot?

  Hello

  Windows 7 Starter does not capture - Home Premium, Professional tool
  and ultimate capture tool.

  Windows 7 has also the capture tool that allows custom, a window or full
  Save the screen.

  Start - type in the search box-> find Snipping Tool at the top of the list and double-click it.

  Windows 7 - features - Snipping Tool
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Snipping-Tool

  Windows 7 - features - Snipping Tool
  http://Windows.Microsoft.com/en-in/Windows7/products/features/Snipping-Tool

  Windows 7 - the cutting tool
  http://www.Microsoft.com/Windows/Windows-7/features/Snipping-Tool.aspx

  Use capture tool to capture screenshots - Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Use capture tool to capture screenshots - Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/use-Snipping-Tool-to-capture-screen-shots

  The cutting tool: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Snipping-Tool-frequently-asked-questions

  ------------------------------------------------------------------------------------------

  Best screen Capture Utility (updated 11/04/2012)
  http://www.techsupportalert.com/best-free-screen-capture-utility.htm#PicPick

  For ALT-PrtScr or PrtScr make sure caps lock key operation is in the correct position.

  How to create a screenshot with Windows 7 Paint
  http://www.SevenForums.com/tutorials/9717-screenshot-paint.html

  Take a screen capture (print your screen)
  http://Windows.Microsoft.com/en-us/Windows7/take-a-screen-capture-print-your-screen

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Explorer Crash when using the control panel

  This is the type of an interesting question that happens to me only sporadically and usually only to a cold start.

  When I shut down the computer completely for cleaning or install something, when restarting, open the Control Panel causes Windows Explorer to crash (note that this is not Internet Explorer).
  
  It restarts immediately, but I lost some of the icons in the taskbar - especially the icon Sound Max.

  If I do a reboot it comes back and I can use the Control Panel normally. Tried to remove items from the start menu, as obviously something is in conflict when it starts but it is like shooting in the dark to find the good start. I even reinstalled W7 with a lot of attention, but it happens once again from time to time. I ran sfc/scannow several times and all is well.

  As long as I don't do a cold reboot it will work very well for weeks without a hitch. (Please no comments about just don't).

  Someone else has a similar problem? My specs are lower and it has not changed when I updated to the latest version of the bios so I suspect something on W7, and I strongly suspect the driver SoundMax which is in fact very old for W7X64.

  All updates are underway, including the latest which was supposed to increase stability for W7 X 64. I had added this update 4/28. An accident 29/4 good. I uninstalled the update and re-installed directly from the microsoft link. Sometimes it works, but not in this case.

  I studied all the information mentioned in the error codes and most of the time, it led to speculation of different people to different causes. I've read that it could be a conflict with the driver Sound Max, this is why I suspect as well that it might involve the Nvidia GPU driver. Changed the GPU driver and no joy. Whenever I have ask W7 to check a solution that is not found. So, it happens once in a while, but there is nothing wrong? At least Microsoft knows something is happening--evidence of the update.

  ASUS P6T Deluxe V2 LGA 1366-Bios 1003 - Intel I7 920 - EVGA GF GTX 260 SC - 12 Gig Corsair DDR3 1333 Ram - Gig 2 300, Velociraptor, Raid 0 1 Seagate 500 Gig HD - Lite on DVD Burner - floppy drive and external-180 card-Coolermaster V8 Avermedia HDTV card reader - Thermaltake Toughpower 850 w. modular fan P.S. - Antec 1200 case - Reobus 6 - 5 controller 120 fan Thermaltake Fans - 1,200 cases GPU Driver 196,21 Windows 7 X 64

  Hello

  Make sure that Windows Update is turned on and install the update KB980408 (http://support.microsoft.com/kb/980408) - April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available .

  Issues that this update fixes this update improves the stability and reliability of Windows 7 and Windows Server 2008 R2 in various scenarios. This update addresses the following issues:

  • Windows Explorer crashes and then restarts when you access a third-party Control Panel item.

  This update solves the problem?

  If this isn't the case, please download this reg from my SkyDrive file:
  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import.

  When Explorer crashes, Windows Error Reporting Service creates a dmp under C:\Localdumps . Please download the file to your public Skydrive folder and post the link here. I take to the dump, maybe I can see the cause.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7, Windows Update crashed, now error 80070BC9 when you run Windows Update

  When running Windows Update, my computer crashed. During subsequent runs of Windows Update, I get the above error and no update is installed.

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows Update crashes when activated

  My computer started as a Vista Machine.  When I got my free upgrade to windows 7 64 bit I started to have a problem of Hanger with in minutes of boot upward.  I traced the problem occurs only when the computer has internet access.  I traced it further the windows Update as a problem when it is disabled the computer crashes is no longer. Update disabled, I am not able to check or download updates from the Microsoft site.

  How can I know what is the problem or how I should do next to fix this?

  Hello
  
  Step 1: I suggest to enable windows update and then, check if the problem persists in safe mode with network. Send back the same.
  
  To use a safe mode with network option, follow these steps:
  
  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  b. use the arrow keys to choose safe mode with networking to Windows Advanced Options menu appears, and press ENTER.
  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode
   
  Step 2: Visit the section below and click the fix it button or try the steps underI would fix it myself.
  http://support.Microsoft.com/kb/971058 
  
  Step 3: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  
  Measures to check the application event log:
   
  a. Click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Activate the update or disable automatic

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows crashes software when it cannot verify the Publisher * found the problem

  * Found the problem, thank you anyway

  I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

  I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

  To protect your computer, Windows crashes software when it cannot verify the Publisher. »

  I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

  I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

  I unchecked the boxes to "verify signatures.

  I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

  I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

  I also remembered to close and restart IE.

  I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

  If anyone has any other clues that could help me with this problem I would be very grateful.

  Fancy

  Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

  Fancy

• Windows Explorer crashes when you open any folder with MPEG2 files.

  WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

  Hi kathyd,.

  ·        You did changes to the computer before this problem started?

  Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

  Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Tool captures of Vista

  I am running vista home basic edition... apparently this version does not contain the tool capture of vista? (it is not visible by clicking on start-all programs-accessories, like others advised on other forums.)  Neither allowsoptional Tablet PC components, a solution since this option is not visible in the window of windows device)

  I tried to download microsoft 'experience pack' that contains this program, but at the end of the process, I get a message "this program cannot be installed on a computer running XP Tablet pc edition 2005... y at - it an easy download for my vista basic edition?

  Unfortunately, you can not Snipping Tool in basic home edition.

  Here's an alternative... Snippy
  http://www.Softpedia.com/get/multimedia/graphic/graphic-capture/snippy.shtml

  How to use Snippy
  http://www.bhelpuri.NET/snippy/ For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My Windows Mail crashes when I get a Facebook notification.

  original title: Windows Mail & Facebook

  My Windows mail crashes whenever I hear from Facebook. Any ideas? Thank you!

  E-mails from Facebook are built a little differently than most, and they can sometimes do this, because they go outside certain standards.  What you can try to do if this happens a lot is go in tools | Options | Read and check to read all messages in plain text only and then open the message from Facebook.  Or you can try doubleclicking top to open it in a window without displaying in the preview pane, and that could keep him under lock and key.

  You could also try compact and repair the database in the case of the question is also linked data (see www.oehelp.com/WMUTil/).

  Steve