TOOLBOX for officejet 6500 disappeared

Similar Questions

• No printing black ink for OfficeJet 6500 a Plus.

  My Officejet 6500 did this once before and everything started to work properly.  Now print all colors except black. I replaced the cartridge HP 920XL but does not always print. Printer indicates that the cartridge is not empty. Checked the troubleshooting but no problem with the cartridge or seats.  Through printer head cleaning. Tried to align the print heads, but failed. Does this mean I need to replace the print head?

  Hi sandraYPO,

  I understand that the black is not printing.

  Thank you for your response.
  I'll be happy to help you with this.

  I knew not what documents you have already tried.

  Here is a document for the printer does not print black ink or color ink or prints blank Pages.

  I have included a document for the 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the screen of the control panel. It will provide you with the instructions to manually remove and clean the print head.

  This URL is a message for soaking the print head that you can try.

  New black cartridge prints partially and light.

  I hope this helps.
  Thanks for posting on the HP Forums. Have a great day!

• Display for Officejet 6500 dissolved

  Display of our HP Officejet 6500 all-in-one was slowly dissolved over the past month. We bought a year and a half so he's out of warentee. When we fax, we cannot read the number as we walked. All the necessary information on the display screen are not available to us. Is there something that can be done to solve this problem? Or is it just a lost cause of built in obsolescence?

  Thanks for reading,

  Naomi

  Step 1: Use the flat screwdriver to remove the cover plate.

  

  

  

  Step 2: Remove two black torx screws on the left and right side plate under shelter.  I have had no bit torx with my clients, so I used a small flat head precision screwdriver.  To the screw on the left, you will need lifting the lid on the additional paper tray.

  

  Step 3: Using the flat screwdriver you used to detach the faceplate, press the tabs to remove the control panel.  There are 3 (or 4? can't remember now) tabs to unlock.

  

  

  Step 5: Remove the control panel of the plateau in which it sits.

  

  Step 6: Remove the control panel cover.  Simply pull directly outward.  There is no locking tabs.  Be gentle, but not a chicken.  It will survive.

  

  Step 7: Remove the 6 (a little smaller than blacks) silver torx screws at the rear of the Panel.  Again, I used a precision over small flat screwdriver and it worked very well.  Once these 6 screws are out, the PCB (with fixed LCD) will come immediately.   No prying eyes, simply lift the opposite side of starting from the tabs and pull out.

  

  Step 8: Prepare and know your Board of Directors.  Place the port of PCB LCD screen up (for lack of a better description) keep the flat cable on the back.  Don't forget, it hangs at the edge of what surface you put on that, we put a LOT of force on this piece.

  

  

  Please forgive the degree of dirt... not my house... Home customers.

  Step 9: Release the LCD display of the status bar it is in.  Holds it with very low adhesive tape.  Very thin pieces on the left and right.  I do not recommend using the screwdriver with it.  Just use your fingers and little patience and let the LCD come with light force.  It took 30 seconds to get out me of this bin.  Long time when there is a screwdriver sitting right next to you that you could catch and push underneath.

  

  Step 10: On the head screwdriver flat number four... Take the tip of the screwdriver and press the cable sheet that is attached to the LCD screen directly on the edge of the circuit board.  Moving to the low one or two millimeters and press again.  Another mm or two and press again.  Go allllllll the bottom of the Strip and press.  I repeat: PRESS! DO NOT DRAG.  If you drag, you will tear the ribbon cable.  Also, do not reach the edge of the cardboard nearby because you could slip and go straight through the ribbon cable (as I did when I was getting impatient 1/4 the way through).  EXTREME PATIENCE is necessary for this process, otherwise it will be a huge waste of your time.

  

  

  Not a redundant pic.  Show the difference in the movement of the driver to a different place, but on the same pins.

  NOTE: Got to half way through and I wanted to see the difference.  Before you begin, my client had 6... Yes only SIX vertical sets of pixels on the LCD display (on 80 total vertical sets for display, 16 sets of 5).  I reconnected the Ribbon on the PCB cable and plugged the power to the printer.  WAHOO! I can see something actually readable!  So I disconnected the power, removed the ribbon cable and continued on the rest of the pins.

  

  After pushing down the rest of the pins, I'm done with something that was MUCH more readable than what I started with.  There is ZERO that can be read on the front screen.  No, I'm getting somewhere.

  

  Could be even better but...

  Step 11: A pencil any with an hard reset on it.  If it is too soft, it is enough.  As you did with the screwdriver, press the pins with the eraser firmly.  I was pressing hard enough to compress the low gum a little.  Figured, ' what I have to lose. " "If I destroy it, I say just the customer there is nothing I could do": Pei

  

  

  Again, use patience and work down a few pins at the same time, so that each of them ends by pressing twice.

  NOTE: After that, I hooked the rear plate until the printer just to see the difference:

  

  YES!  QUITE usable now!  Not perfect!  But still a lot better than having to chuck the printer or not read the screen AT ALL!

  Step 12: Return all together.  Look at the first steps, if you have forgotten how.  The screen was even better once I got it all back together.

  

  I hope this helps! Absolutely had no idea it would work, reason for which I don't have pictures of what it looked like before... But trust me... it was literally only 6 visible vertical sets of pixels on the screen.  Read absolutely nothing.  My client is completely satisfied with using it like that because she could actually do what was on the screen.

  The reason why I even looked into it was because she told me that it was getting worse... ALL HP recommendations of their (this) site says to unplug the power, press # 6, blah blah blah.  That's BS.  If there is a progressive problem like that, it's 100% always going to be a physical problem.  NOT a chip problem (which is what they tried to involve having the power to bike system.)  In fact, their resolutions meant: ' we do not have a clue as to why this happens.»

  I know exactly why it's happening.  Go to pretend to change the ink cartridge.  Lift the top cover (not the scanner bed cover, the whole top cover).  OK, now close.  You get to an inch before it closes completely and BOOM!  Something loose in the prop-up mechanism and he slams down.  Well well with this past several times with paper jams if deleted and any other, the LCD Ribbon membrane that is literally a piece of tape cable slowly starts to come loose over time.  That's why you ALL experience get worse and worse.

  Again, this is not a full proof solution, but it avoids the need to throw a system perfectly 'printing and scanning.

  I hope this helps and good luck!

  Thank you

  Paul

  PCFixerGuy.com

• Driver for Officejet 6500 E709a must be updated. Currently causes a distortion of the Excel worksheets.

  By Microsoft, the driver for the Officejet 6500 E709a must be updated to resolve a problem that causes the deformation of MS Excel spreadsheets.  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Excel/Excel-2010-scrolling-problem/166a8...

  The forum page linked above:

  If the problem occurs in safe mode too, change the default printer and check. If Excel works fine after changing the default printer, then contact the manufacturer of the printer to update printer drivers.

  GHenry512, welcome to the forum.

  Since you don't mention which operating system you use, here is the Support page for the printer.  Choose your operating system from the drop-down list to see if there is an update to the driver.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Support for Officejet 6500 E709n ePrint? Not easy to use!

  How does a print docs from your iPhone on an OfficeJet 6500 E709n.  I installed the home & Biz ePrint iPhone app and was able to print something on my wifi enabled printer, but it seems like a process terrible roundabout.  I tell myself that I must be doong something wrong.  Can you give me the configuration and use the procedure to do this.  Thank you!

  Great!  I'm glad it works for you. Say your question, you're right.  The E709n came out before the implementation of ePrint, so it doesn't have the same opportunities of access to the service.  As the Home & Biz app uses the local network to connect, it will allow you to print from mobile devices to the E709 on this network.

• Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

  Hello

  I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

  I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

  I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

  Thanks a lot in advance!

  Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

• Software full feature driver for officejet 6500 has more of OS Windows7

  I can't use my laptop with a wireless router. Please tell me how to uninstall it and where can I get the recommended driver software.

  Here is the full link driver recommended for Windows 7 64-bit: HP Officejet full feature and driver software

  Good luck!

  -SeanS

• How can I print black ink only automatic duplex mode for Officejet 6500?

  When I set the printer to automatically print on both sides, it allows only color or grayscale of high quality as print color options.  If I print on one side, then I have a third option for black ink only.  Does anyone know how to get black ink only when getting both sides to print automatically?

  Sorry, this is not an option.  When printing on the front of a page in duplex black is underprinted with color to make the 'together' impression and dry faster.  Thus "black only" is not an option when you print duplex pages automatically.

• Defective cartridge for OfficeJet 6500 920XL ink

  I opened and inserted a new cartridge HP 920XL and couldn't get it to lock in the Chamber, I received an error message.  When I looked at the cartridge, compared to the old cartridge, I noticed that one of the tabs at the bottom of the cartridge is missing, and he will not be with the printer. That is to say; It is broken and there is nothing I can do about it.  Is it possible to send it back to us for a replacement or?

  You can contact HP Total Care and inform them of the situation and they will be able to help you. The number for U.S. and Canada customers is 800-474-6836. Customers in other countries may find their contact information here. I hope this helps.

• Ink level report for OfficeJet 6500 a Plus

  HP watch control centre is no longer an option for me to check the levels of ink for my printer. How can I get the complete control center folder options?

  I understand that you are unable to check ink levels. I uninstall the printer and reinstall the drivers from the Hp website.

  Click here for the drivers.   Select the drivers and full software features.

  Let me know how it goes.

• Update of firmware for Officejet 6500 E709n Wireless does not work

  My OS is Win XP.  My printer keeps locking up.  I found a forum that says to use #6 when starting.  It works for a few hours, but it ends by crashes again once it goes into mode 'sleep'.  I found another blog that said to install the latest firmware.  I discover that I have firmware version 907AR, and HP web site has 935AR.  I downloaded the update and tried to install it.  He gets where extract the files, and then it throws the following error:

  Firmware download utility has encountered a problem and needs to close. We are sorry for the inconvenience.

  Has anyone else had the same problem?  I disabled the wireless printer and connected to my PC via USB to perform the installation.  I tried to save the firmware utility and running it from my hard drive and it works on the HP website with the same result.

  Never mind.  I followed the instructions by NOT using my wireless connection.  The printer connected to the USB port caused the installation fails.  When I ran the update, while the printer is connected wireless, the installation worked.  I just did the update, so I'll have to wait and see if it solves the problem with the gel printer.

• Problems with 920XL ink for Officejet 6500 a more printer

  I was very disappointed so far with 920XL ink. It is supposed to provide 2.5 x the ink, but since my printer use frequently will not be printed in black and I have to remove the cartridge, shake and replace to get the ink out. Someone else had this problem? I had no problem with the ordinary 920 black ink cartridge.

  HPnewbee Hey!

  You may have a bad cartridge. If you have recently purchased it, it may still be in warranty. You can call to see if you can get a replacement cartridge.

  I hope this helps!

• ink system failure message for officejet 6500 a

  I followed all the instructions and cleaned as described and now the last resprt is to "replace the print head. can someone tell me if this is supposed to happen after 10 months and where can I get one? The machine will not even scan with the error message.

  Since you're still under warranty HP directly to HP.

  Use this link to select your country, then call technical support.

• OfficeJet 6500 nit scanner works after installing windows 7

  Is there a fix for Officejet 6500 scan does not not after installing windows 7?

  Hello

  Driver and applications in support of Windows 7 can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=3795314

  Kind regards.

• Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

  I bought a HP OfficeJet 6500 has more all-in-One CN557A, I want to use with ubuntu 10.04 64 bits as a wireless network printer.
  Before, I bought, I checked the compatibility on www.hplipopensource.org and www.openprinting.org, and everything was in order.
  The machine is detected automatically and fully functional when connected with a usb cable, but I failed to operate as a wireless printer.
  That's what I did:

  I configured the printer on the network (through the interface of the printer), and it connects. It prints a 'Wireless Network Test report', and everything works. I can ping the local ip address and access it via the browser. HP eprint also works.

  I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognize the device.

  I ran 'hp-check', who gave without errors or warnings:

  tjoff@MEK-403-jakbo-01: ~ $ hp-check

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Dependency/Version Check Utility worm. 14.3

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the
  HPLIP provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies
  are installed to compile correctly HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution
  provided package (.deb, .rpm, etc.) or a supplied HPLIP tarball already built
  the appropriate dependencies installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode
  check the two cases above (the two dependencies of compilation and execution).

  Save the output in the log file: hp - check.log

  During initialization. Please wait...

  ---------------
  | SYSTEM INFO |
  ---------------

  Base information system:
  78 - Ubuntu Linux 2.6.32 mek-403-jakbo-01-35-generic # SMP kills Sep 11 16:11:24 UTC 2011 x86_64 GNU/Linux

  Distribution:
  Ubuntu 10.04

  Checking version of Python...
  OK, installed the version 2.6.5

  Checking for version 4.x PyQt...
  OK, version 4.7.2 installed.

  Checking the CUPS...
  Status: Scheduler is running
  Version: 1.4.3
  error_log is defined at the level: warning

  Checking the dbus/python-dbus...
  dbus daemon is running.
  Python-dbus version: 0.83.0

  ------------------------------------
  | COMPILATION AND RUNTIME DEPENDENCIES.
  ------------------------------------

  Note: to check the dependencies only compilation, run hp - check with the parameter - c (IE, hp-check - c).
  Note: to check the dependencies only run time, run hp - check with the parameter-r (IE, hp-check - r).

  Dependency checking: CUPS - Common Unix Printing System...
  OK, found.

  Dependency checking: CUPS devel - development Common Unix Printing System files...
  OK, found.

  Dependency checking: CUPS image - development for the CUPS image files...
  OK, found.

  Dependency checking: DBus - Message bus system...
  OK, found.

  Dependency checking: gcc - the GNU Project C and C++ compiler...
  OK, found.

  Dependency checking: GhostScript - PostScript and PDF interpreter and preview generator...
  OK, found.

  Dependency checking: libcrypto - OpenSSL cryptographic library...
  OK, found.

  Dependency checking: libjpeg - JPEG library...
  OK, found.

  Dependency checking: libnetsnmp-devel - SNMP networking of development libraries files...
  OK, found.

  Dependency checking: libpthread - POSIX threads library...
  OK, found.

  Dependency checking: libtool - building of the library support services...
  OK, found.

  Dependency checking: libusb - Library USB...
  OK, found.

  Dependency checking: make - GNU make utility to maintain groups of programs...
  OK, found.

  Dependency checking: PIL - Python Imaging Library (mandatory for the commandline scanner with hp-scan)...
  OK, found.

  Dependency checking: PolicyKit - administrative framework...
  OK, found.

  Dependency checking: PyQt 4 DBus - Support of DBus for PyQt4.
  OK, found.

  Verification of dependency: Python-DBus - Python bindings for DBus...
  OK, found.

  Verification of dependency: Python-devel - development Python files...
  OK, found.

  Verification of dependency: Python libnotify - Python bindings for libnotify desktop notifications...
  OK, found.

  Verification of dependency: Python XML libraries...
  OK, found.

  Verification of dependency: Python 2.3 or above - for the fax function...
  OK, found.

  Verification of dependency: Python 2.2 or higher - Python programming language...
  OK, found.

  Dependency checking: Reportlab - library for Python PDF...
  OK, found.

  Dependency checking: SANE - library digitization...
  OK, found.

  Dependency checking: SANE - sweep of development libraries files...
  OK, found.

  Dependency checking: scanimage - Shell program scanning...
  OK, found.

  Dependency checking: xsane - scanner Graphical frontend for SANE...
  OK, found.

  ----------------------
  | HPLIP INSTALLATION |
  ----------------------

  HPLIP currently installed version...
  HPLIP 3.11.10 currently installed in ' / usr/share/hplip.

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.11.10

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.11.10
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.11.10
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  HPIJS-only-build = no
  Lite-build = no
  udev-acl-rules = yes
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  # hplip.state - runtime HPLIP persistent variables.

  [plugin]
  installed = 0
  EULA = 0

  Current content of ' ~ /.hplip/hplip.conf' file:
  [last_used]
  printer_name =
  working_dir =.
  device_uri = "hp: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [installation]
  version = 3.11.10
  Date_Time = 2011-11-16 14:30:35

  [Settings]
  systray_messages = 0
  systray_visible = 0

  [fax]
  Email_Address =
  voice_phone =

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  device_list =
  interval = 5

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  Device URI scheme
  -------------------------------- -------------------------
  HP: / usb/Officejet_6500_E710n-z? s HP Officejet 6500 E710n-z
  Erial = CN16F2402Q05JW

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  B-403-271-A4-COLOR2
  -------------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color

  B403-271-A4-BW
  --------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW

  HP-Officejet-6500-E710n-z-FAX
  -----------------------------
  Type: printer
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
  Description of PPD: HP Officejet 6500 e710n-z, hpcups 3.11.10
  Status of the printer: printer HP-Officejet-6500-E710n-z-FAX is inactive. activated in 2011-11-16 T 01: 00:45 THIS
  Communication situation: good

  ----------------------
  | SANE CONFIGURATION |
  ----------------------

  'hpaio' in ' / etc/sane.d/dll.conf'...
  OK, found. SANE backend "hpaio" is properly set up.

  Check the output of ' scanimage-L '...
  device ' hpaio: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW' is an all-in-one HP Officejet_6500_E710n-z

  ---------------------
  | THE PYTHON EXTENSIONS.
  ---------------------

  Checking the 'cupsext' extension of CUPS...
  OK, found.

  The 'pcardext' Photocard extension checking...
  OK, found.

  Checking extension 'hpmudext' I/O...
  OK, found.

  Checking the 'scanext' extension of healthy MIND scan...
  OK, found.

  -----------------
  | CONFIGURATION OF E/S USB |
  -----------------

  Checking the permissions of attached USB printers...

  For this device HP 0 x 5412 002:005:
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  Device node: / dev/bus/usb/002/005
  Mode: 0664

  ---------------
  | USER GROUPS |
  ---------------

  LP ADM dialout cdrom plugdev lpadmin admin sambashare vboxusers

  -----------
  | SUMMARY |
  -----------

  Without errors or warnings.

  Fact.

  I then ran "sudo hp-setup", chose the device (which has been detected), has chosen my wireless network, enter the wireless security key. On the results of configuration window, I get two messages:
  "Your printer has been correctly configured on the wireless network. You can now unplug the USB cable.
  and
  "The Ethernet cable is plugged to prevent you to connect to a wireless network. For a wireless connection, remove the cable and try again. (VSA000) »
  There is no ethernet cable connected, so I can't remove it. I unplug the USB cable and click on "Finish". What makes the "hp-setup" - beginning of dialogue even more and the printer has not been installed.
  In the terminal, I have the following:

  tjoff@MEK-403-jakbo-01: ~ $ sudo hp-setup
  [sudo] password for tjoff:

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Printer/Fax Setup Utility version 9.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Research on USB bus...
  GET/HTTP/1.1 IoMgmt/Adapters
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  error: missing answer key: ' iorotocols-iorotocol - dd:dnsserveripaddress - 0'
  GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks/SSID = mVnmXfsu HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET /IoMgmt/IoConfig.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  I then tried to reconnect the printer usb cable and run "hp-toolbox" and click on "Configuration without wireless/wifi via a USB port. Now, I get the error:

  tjoff@MEK-403-jakbo-01: ~ $ hp-toolbox

  HP Linux Imaging and Printing System (ver. 3.11.10)
  HP worm Device Manager. 15.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  HP Linux Imaging and Printing System (ver. 3.11.10)
  WiFi Configuration Utility version 1.1

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  error: error writing channel
  error: an i/o error has occurred. Please check the USB connection to your printer and try again. (I/O device error)

  Fact.

  I do not understand how after this point, and any help is welcome.

  A friendly soul on ubuntuforums pointed out, that the wireless configuration is necessary only if the printer is NOT connected to a local area network (W). So everything what I should really do is to configure the printer on the page Administration of CUPS, and it worked. Problem solved. Ridicule me.