Toshiba 40L7335D - USB NTFS HARD disk not supported?

Similar Questions

• IDE to USB external hard disk not detected

  Convert old IDE hard drive of the laptop HP USB. The drive uses two USB ports for the detection and power. The car worked well for a long time and now with recent updates, MS, AVG and so forth that the hard drive USB - IDE is no longer detected. This is true for my HP laptop and my Toshiba laptop. Both computers are running XP Professional

  1. There is just nothing no error on a laptop

  2. the player does not appear laptop computer oniither

  3 tried to plug it into different USB ports, USB connection at the same time to the computer, plug in and unplug the USB to IDE - USB hard drive makes for two laptops

  4 uninstall all USB ports and leave the computer re-autodetect, done for two laptops

  5. let the IDE - USB hard drive connected to the computer and restart for two laptops - nothing

  Hi, have you tried to remove Avg and re-install the drivers for USB. Have had problems of simler and found that Avg is interfering. I've now changed my Anti virus Avast. hope this is of some use.

• Inspiron 5748, Crucial M500 - "internal hard disk not found".

  My Inspiron 5748 comes with w8.1 pre-loaded onto a standard 500 GB hard drive, but I wanted to move to an SSD. I have two M500s Crucial (the two 2.5 "); one with W7 loaded from another laptop, the other barely taken out of the box.

  With one of them installed, the message at startup after the dell symbol arrives is "internal hard disk not found", and while there is no bootable media found.

  In both cases, UEFI and back diagnonstics reporting tools that there is indeed a crucial m500 present and functional. Both work well in my other laptops (purchased separately).

  Is there a problem of formatting? There is no update available for this SSD firmware.

  Thank you!

  Hi Wazzbot,

  Use the recovery discs Windows 8.1 you prepared using the Dell printer utility to backup and restore Windows loading on the SSD drive. Because the disks are the same size, it should work without problem.

• Toshiba Canvio USB external drive does not work well

  I hope this is the right forum for this question
  Please help me with my external hard drive, Toshiba Canvio usb e05a032bau2xk.

  It worked fine, but not now.
  My OS is win xp, sp3, home ed.

  The Toshiba drive is more steady and is almost impossible to work with now. I checked with Device Manager that says the drive is working correctly.

  I've uninstalled and reinstalled the driver, cleaned and Defrag the disk (when I was able to access) but it works still very badly now!

  What else can I do to find out what is the problem with this Toshiba drive and return it works reliably?

  Thank you
  Jim

  Post edited by: jimrich

  Somehow I'm the drive working again, I went in 'tools' and all reset setting 'default '. Now the drive works, but I transferred some data on the hard disk, just in case. Wish me luck on this...
  Jim

  > Somewhere, I'm the player works again, I went in 'tools' and all reset setting 'default '. Now the drive works, but I transferred some data on the hard disk, just in case. Wish me luck on this...

  Thanks for the comments, I hope that the reader should work correctly now

• Satellite 2410-404: which HARD disks are supported

  Hello

  one of our phones, to a new hard drive. What toshiba product are compatible to our Toshiba Satellite 2410 404?

  concerning
  Jan Wernecke

  The problem is that Toshiba provides official information on compatible HARD disk HARD disk sizes.
  But I've studied a bit in the internet and the following four sizes of hard drives must be supported:
  20 GB; 30 GB; 40 and possibly the 60 GB.

  Perhaps more info:
  Must HARD disk supports the improved IDE ""(ATA-5) EIDE interface ".

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• USB-6211 - digital output not supported?

  Hi all

  I can't use the USB6211 device port... I use daqmx with Delphi7 API functions.

  First of all, I tried this:

  DAQmxCreateTask('', @TaskDO);
  DAQmxCreateDOChan (TaskDO, PChar('Dev1/port0'), ", DAQmx_Val_ChanForAllLines);
  DAQmxWriteDigitalU8 (TaskDO, 1, 1, 1, DAQmx_Val_GroupByChannel, $FF, @written, nil);

  I had an error in the DAQmxWriteDigitalU8:-200012 (= digital output not supported). (???)

  OK, I tried to disable autostart option based on DAQmxWriteDigitalU8 and insert a 'manual' start in the code:

  DAQmxCreateTask('', @TaskDO);
  DAQmxCreateDOChan (TaskDO, PChar('Dev1/port0'), ", DAQmx_Val_ChanForAllLines);
  DAQmxStartTask (TaskDO);
  DAQmxWriteDigitalU8 (TaskDO, 1, 0, 1, DAQmx_Val_GroupByChannel, $FF, @written, nil);
  DAQmxStopTask (TaskDO);

  Now, I got the same error in DAQmxStartTask:-200012 (Digital Output not supported, once again). (?????)

  I don't understand.. 'Digital output not supported "? USB-6211 has 4 lines! What is the problem?

  I want to just turn on and off the lines from code...

  -Cs George-

  Well, finally I figured out...

  Here is the solution:

  DAQmxCreateTask('', @TaskDO);
  DAQmxCreateDOChan (TaskDO, PChar('Dev1/port1'), ", DAQmx_Val_ChanForAllLines);
  DAQmxWriteDigitalU8 (TaskDO, 1, @dummy, 1, DAQmx_Val_GroupByChannel, @bitmask, @written, nil);

  Digital output lines are on port1! Corrected parameter.
  And the part of the interface of DAQmxWriteDigitalU8 had to be changed (in nidaqmx.pas).
  I don't know why, but the AutoStart (dummy) parameter in the DAQmxWriteDigitalU8 function is ignored: function always starts task automatically, regardless of the value of autostart. But this isn't a problem for me.

  -Cs George-

• How can I purchase back level versions of Windows to restore hard disks not bootable corrupt in several Versions of Windows

  I have several SONY computers that hide the source code for VAIO and Windows code in the hidden partition.  I can't buy Sony versions of food because they are more up-to-date except one on Vista. I bought the original code for a 2007 Vista SONY and I'm in my third day of restoration of this system. These SONY computers were cutting-edge at the time I bought them and contain historical data such as taxation, Quicken financial and video making tools and souvenirs. I bought five hard drives that correspond to these various computers and MS Windows 7 Ultimate and professional XP I could check the operating systems MS now called counterfei and locked the keys. The DVD have all markings defined by authentic SM, (never open COA label, proof of license, inner mirror band hologram, perimeter edges wavy DVD hologram, dynamic, fix security logo, etc...).  This is two copies of Windows 7 Ultimate, XP Professional complete Edition.  I need trouble Media Center 2005 on intel dual 3.6 Ghz with 2 GB of mem, XP Professional upgrade of home double 2.0 Ghz 1 GB mem and Vista 32 bit.  MS denied that these are authentic and has blocked their execution.  Their solution is to buy genuine from Ms.  Since Windows in backward compatibility where and what to buy to fix these broken MS insecurity not corrupt vulnerable buggy tested untrusted Windows operating systems?

  I have maybe two HD that have the same system and the product key, but we are not bootable on Windows 7 Ultimate machine.  Any suggestions for a tool that I can fix develop not bootable would be appreciated.  I tried several such as Paretologic and Spotmau with no luck.  This is getting really expensive general MS deficits.

  Hi Boomer6005,

  ·         What is the error you receive?

  ·         How have you activated Windows?

  You can see:

  Windows 7: Activation Windows 7: frequently asked questions

  Windows Vista: Windows Activation: frequently asked questions

  Windows XP: How to activate Windows XP

  Also, try to connect hard disks as a slave to a working machine drive to recover data.

  What about the versions of Windows Media Center, those who were OEM (Original Equipment Manufacturer) specific and if the OEM cannot provide a replacement, you will not be able to find one.

• 2nd 2 TB Seagate hard disk not detected

  Currently, my Dimension 3100 desktop, 2.8 GHz P4 w/HT, 1.0 GB of ram has a Seagate 2 TB (6 Gb/s) inside. This hard drive replaced two hard disks, size 1. TB and 500 MB. The original 2 TB drive is full, 85%, so I bought another hard drive, exactly the same style and size as the active drive (STBD2000101). I run Linux as my main operating system, which is a resident of GParted. After that I physically installed 2nd hard drive 2 TB to SATA2, I tried to put up with GParted from the first hard drive to SATA0. Although GParted indicated that the drive was present, when this player was selected GParted not reported "no device detected". Temporarily, I removed the original drive and installed the 2nd hard drive to SATA0 for the purposes of the implementation of the partitions and format it ext3 of the live CD. It worked for the most part, except that GParted reported the drive as 29 GB used, even after formatting again. To make a long story short, I did some troubleshooting and found that nothing is really wrong, except that the 2, 1-TB limit has been exceeded when I installed the second hdd. The BIOS recognizes the new HDD on SATA2. GParted, run from the original disc with Linux OS, see a player but is grayed out when the disc is selected. I can see there is a problem with the limit of 2.1 TB on the capacity of the drive. Unfortunately, I use GRUB legacy bootloader installed on the MBR. I hope that others have worked through this kind of problem. Please notify.

  Thanks for the help. I knew why the second hard drive was not recognized. It is a matter of core, I use an old version of Linux. Recent kernels is not a problem with the detection of two hard drives of 2 TB. It is true that I have never exceeded the famous limitation of 2 TB. The kernel that would not see the second disc was 2.6.32. I now use the kernel 3.2.33. without any problem. Even if the drive can be detected by kernels older (for example. 2.6.32.59) there may be questions that deserve to move on to a core even more recent. "Grep sdb unpacking" command will display warnings if they exist.

• R720 PE hard disk not recognized

  It is a newly purchased machine without BONES. I tried to install Windows server 2008 R2 Standard but stalled to the point that the drivers for the hard disk had to be loaded. In preparation for the installation I downloaded all the drivers on the material and has a drive ready for entry. Files were burned directly to the root directly but always installation failed because he could not find the readers. I can't spread their wings to get Open Manager or other tools started because readers cannot be configured.

  Can someone tell me how to get started with it? Thank you, ykelley

  You need drivers.  2008 R2?

  http://downloads.Dell.com/FOLDER02416328M/2/SAS-RAID_Driver_W2K8R2_D5N8T_A06_6.802.21.00_ZPE.exe

  Download and run to extract, the put option are the files are in a flash drive, click load drivers a link on the page that says no hard drives.

  Why RAID 0?

• internal hard disk not found, to solve this problem try reinstalling the drive... Help, please

  I have a Dell Inspiron 1440 use for 2010 all of a sudden, I saw this error message 'drive hard internal found to solve this problem try to reinstall the drive' when I turned it on. Then I tested with other other laptop HARD disk drive and it starts fine. Then realized that the HARD drive was taken, at the bottom, a new samsung SSD 120 GB drive and installed on my laptop and try to install Windows 7 from a CD see always the same error when turned on.

  Please help with this question.

  Thanks in advance

  ROHIT

  Thank you guys!

  My bad after I installed the drive SSD the CD that was in the DVD player was the CD for Applications/drivers instead of Windows 7 disc. I just realized and installed Win7 on my new hard drive, my laptop is back to normal. Thank God! I saved 500 to get the new laptop.

• MD3200i disk not supported [CF]

  Salve,

  Abbiamo inserito un nuovo of Western Digital WD2001FYYG-01SL3 of SAN MD3200i una disco,

  He reported disco viene come incompatibility:

  Status: Incompatible

  Cause: not supported

  Che so I have brain WD2001FYYG Google essere compatibility,.

  è modo di far funzionare anche questo?

  Del versione del firmware e 08.20.12.60 RAID controller

  Unfortunately no, usare UN disco compatibile.

  Francesco

• Computer laptop 15-f211wm Mod #L0T32UA: USB external HARD disk and laptops not detected but used to be

  My USB ports do not seem to work properly.  I used to be able to plug in my external hard drive and mobile phone to transfer files, but now I can't.  In the DEVICE MANAGER of the laptop, nothing seems to be wrong, no red or yellow warning.  However, the USB ports DO not seem to power the devices, my cell phone goes into charge mode and my HDD Seagate you can feel it vibrate slightly.  There are two USB ports on the left side and one on the right, and all three can not detect devices.  Help, please.

  HERE IS a GUIDEto solving the problems of USB such as described in the post.  See if any of these help.  As you have posted in the notebook section, when you do that a single step to cripple, also remove the battery after the computer shuts down, unplug charger, too.  Then hold the power button for at least 30 seconds before feeding back.

  BTW: have you tried to delete all things under the rubric of the USB in the Device Manager, then reboot to allow Windows to reinstall the USB ports?

• Western Digital USB external hard drive not found by Win XP.

  I have a new USB 2.0 TB WD My Book Essential that my system does not.  I took the first return to BB, thinking it was defective.  A new is similarly, and there is no indication that something is plugged into the USB port.  My system is: 2.8 G P4, 3G of ram, 850 GB on HD 3 internal, under XP SP3.  All 8 USB 2.0 ports work fine on everything else.  My system is well maintained with Virus and Spyware protection and registry cleaning and start cleaning.  Newspaper observer event system is without errors or warnings.  Device Manager reports no problem.

  I tried all the suggestions on bonofan1823 post.  Reinstalled all the drivers and other utilities allowing to scan the USB ports. The drive is formatted NTFS according to WD.  I searched ghosts, 315539 devices. I used the command SFC, 3107747. I ran Microsoft Fix It--I deleted UpperFilters and LowerFilters entries by 925196.

  The WD My Book has its own power supply, all my tensions.  The blue light on the WD drive and it's a small fan is running.  The drive does not appear in disk management or any where.  The icon does not appear on the far right of the taskbar and no audio sound is made when it is plugged into the USB port or powered.

  Someone at - it any other suggestions?  Does anyone else have this problem?

  Thank you.

  Divya R,.

  Thanks for the info.  I've tried the drive on another computer running XP Pro. and it was recognized instantly.

  I found the driver ITS on the website of WD and installed on the computer.  No change, no recognition. WD has also provided a firmware update for the drive that I could not install because he could not find the drive.  I reinstalled the latest version of the BIOS (2005) for the ASUS motherboard.  I used an old record of 250G WD USB years and it still works.

  UPDATE *.

  I bought a $10,00, 3 port USB 2.0 PCI card and plugged.  The WD My Book is instantly recognized and works perfectly. Problem solved.  The problem must be the motherboard ASUS or the BIOS on my P4 system.  I suspect that WD drive information was never getting to Windows XP.

  Thank you

  Lurker38

• Old pc in enclosure hard disk not recognized by the new pc using windows vista

  Old pc unbootable.  Got a new laptop and want to recover data on the old hard drive.  Use a Sweex 3.5 IDE enclosure, to connect the old hard drive via the USB port again mobile. The hard drive is visible in device management, but not in my computer.  No idea how to solve this problem?

  Hi Tomvdv,

  At this point, it would be best to contact directly the Sweex.  It is the responsibility of the manufacturer to provide drivers for their devices:

  http://www.Sweex.com/en/service-support

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think