Toshiba ciolour lcd TV problem

Similar Questions

• Toshiba 40BV801B LCD TNT HD

  I recently bought a Toshiba 40BV801B LCD TNT HD which works fine but will not show anything other than a black screen on the channels of DTT HD 101, 102, 103, etc. (BBC and ITV).

  Is this likely to be a problem with my particular model or a requirement for an update of the firmware or something else?

  If this is could a requirement of the firmware someone please post the link of the relevant firmware download.

  Hello

  To download the firmware, you can check this product TV Toshiba firmware download page:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  But to be honest, I think you should check the TNT page for details on the problems of possible channels.

  This is a page for TNT:
  http://www.Freeview.co.UK/help/service-updates

• Toshiba Qosmio G50 - 12F - LCD light problems

  Hi everyone, I use to have problems with my laptop lcd light
  I used to change 3 new inverters and the problem is still there because it works very well Hi alternately dark and I am able to see very very low when I turn and on again once I turn on just for 5 or 10 seconds and turn dark again once I changed 3 inverters with similar without success When I unplug the main cable from the inverter and turn it on again it just turns on the light after a few seconds it darkens again
  any sugesstion what should I do if I have:
  change the ccfl
  change the complete LCD or
  change a motherboard

  No one has any idea what to do?

• Sound on Toshiba Regza 37 "LCD TV problem

  I have a regza 37 inch lcd tv.

  He has just started turning the sound to zero by itself. I sat looking at when all of a sudden the bar master volume came on the screen and started to count to zero. I could not turn it upward with the remote and the buttons on the side also do not work.

  When I chose the remote menu it looked like there was a standing order being sent because the options on any given menu kept rotating by itself. remove the batteries from the remote control made no difference,

  I turned off the wall and waited a bit and then he lit it worked well manually disable the buttons both through the remote control.

  an hour later the same thing happened again.

  all thoughts about problem and very welcome possible resolution

  In my opinion there is no other solution than to check the hardware.
  The remote control cannot be the reason for this, since you have already removed the batteries.
  So I guess that it material s internal problem that should be checked by an authorized technician.

• With Satellite Pro M-series LCD projector problems

  Hello

  I use a Toshiba Satellite Pro M series for more than a year. I would like an answer to a problem that I've had since I bought my laptop. When I use a LCD (beemer) projector to watch movies on the big screen, he seems to be a problem. When I choose to show my desktop on screen you there is no problem. When I open a video file, divx or just a DVD I can see the movie on the screen of my laptop, but I don't see on the projection screen. It is only black. When I choose the mode full screen, there is always the same prob. Very strange because when I chose the projector as 2nd screen and I slide the film into the second screen, I can see the movie on the projection screen. The only thing that I hate divx and mediaplayers readers when you select full screen on the second screen, the film jumps on the first screen (the one on my laptop). I tried all the codecs and other things. Nothing seems to work.

  Has anyone treats these problems before? Please let me know if anyone knows how to solve this problem.

  Kind regards
  Compton

  Hi refill,

  I thinnk it may be a driver configuration problem, but to solve it, I need to know what mobile phone do you use?

  Satellite Pro M?

  Also would be nice to know what operating system is runing (OS recovery or another image) and what version of driver display that you use!

  Goodbye Chris

• dust behind the screen LCD - common problem?

  Hi, I recently bought a toshiba EQUIUM A60-181, and I'm
  facing a problem with the LCD screen.
  There seems to be a defect or the dirt behind the glass
  because it blocks the light of a pixel. Any attempt of
  apply moderate pressure to move this filth that has failed. I was
  I was wondering if it is common with screens LCD expect a sort
  I can't believe that this has passed quality of imperfection
  control. Have I not justification for firing
  toshiba for fixing, it is barely 1 week old?
  I have read the warranty booklet and there is no mention of
  dead pixel return policy can you elaborate on what is
  and what is not covered by the warranty?

  see you soon,

  Richard.

  Hello

  In my opinion, you should contact the Service partner. You have purchased a new product and if you see that there is something wrong, you can contact them. I'm sure that the technicians can give you more information on this issue.

• Toshiba Gigastore 250 GB: problems to delete files

  Hi all

  I can't delete files from my Toshiba Gigastore more. Whenever I try, the following message appears: "unable to remove. Access denied. Source is probably always open. "

  However, the files are not in use when I try to delete. I tried to delete after a reboot and tried as admin. Nothing works.

  The problem started to occur after the Gigastore has been disconnected from the computer (hot plugout).

  My OS is W2K SP4 (with the latest security updates). The GigaStore didn't work properly from the beginning, because it is not possible to disconnect the USB when the system is running (this problem is known and described in the user manual).

  Howe can I overcome the problem without reformat the drive? Maybe it's possible to boot linux and delete files on the GigaStore? Is this desirable, that linux does not seem to get along well with NTFS?

  Many thanks in advance,
  Led

  Keywords: Toshiba Multi Media Center Gigastore 250 GB, delete, file in use, Windows 2000 SP4

  Hello

  I'm not very familiar with the Toshiba Gigastore.
  Well have you tried to remove the USB port on the Device Manager and then reinstall the drivers?
  I have never tried this solution, but maybe this will help.
  Please check for this possibility.

  Good bye

• Toshiba Satellite Pro 4600 problems

  Toshiba Satellite Pro 4600 is usually a large equipment once it works! I have bought in December 2001 + additional 2 year warranty. Used every day for a business purpose - mainly on a desk anchored to the Port Replicator or inside-out of the office with WiFi.

  Almost after a year I bought it - one of the memory locations died on the motherboard! A machine still worked OK - only on a slot with installed memory capacity! So the 256 MB of memory and motherboard have been replaced by September 2002.

  Then the hard drive was noise - has been replaced as a guarantee somewhere in October 2004. So I thought that it is her - I have now a few years without problem again!

  Yes - all of a sudden a few days ago, I closed the lid for a coffee brake and after that the machine woke up to a strange sleep - the screen flickered and a machine was muzzy! Like the previous night failures that occurred before that I thought that this restart will solve the problem! It s woke up without the support of the voice! And after that I discovered that the WiFi card is always on - no matter if you switch the button on or off! If the service said that probably the motherboard has not once again!

  So, which brand and model to buy then?

  > And after that I discovered that the WiFi card is always enabled.
  > - no matter switch you on or off! So that the
  > service provided that said probably the
  > motherboard has yet again!

  same thing with my nine M30 I bought last summer. I can't be able to turn off the WiFi keyboard functionality. the light is still on too.

• Toshiba Tecra 8000, monitor problem

  Hello

  I have a problem with my laptop Toshiba Tecra 8000, there is a green line with a width of 1 pixel on the screen of my laptop which does not disappear. the laptop is almost 2 years old. is there a possibility that it could be repaired? Thanks in advance,
  Mark Kuiper

  Hello

  interesting would be if the green line is permanently on the screen during startup or 'just' that Windows runs.

  But never mind, the laptop Tecra series three-year warranty.

  So in this case you can give it to a Toshiba repair for a control center upward.

  Good bye

• Toshiba 39L4353DB software download problem

  I have a Toshiba smart TV 39L4353DB who can not download the software updates from the internet (a BT home hub wireless 5).

  • Cloud services are working properly - YouTube, BBC iplayer, Twitter, RSS etc.
  • Network connection test pass each time.
  • Most long I left the 'download' TV is 24hrs.
  • I tried to download the latest update of the software/firmware on the site of toshiba, and with a key USB but the TV does not recognize.
  • When I finally put off the TV and turn it back on, it recognizes there is a update but just freezes on a box "software downloaded from the Internet, please wait...". »
  • Today (August 13), I tried a reset of the TV, but he's still frozen on the same dialog box.

  A month ago that the TV has lost all its digital television channels, an area of the screen reported "No Signal". I returned the TV and everything was fine, but every time I turn on the TV channels are missing and I have will be resolved. I hope that this problem will be solved by a software/firmware update.

  The TV is 17 months old. I mounted it on the wall about 2 months ago, but I don't see how this would have caused the problem.

  Is there a known solution? Is someone having a similar problem? Any help appreciated gratefully.

  Richie

  What SW version is running on your game? You said, you have ever tried USB update, but the update is not recognized.
  What do you, to start the update? What format that you use for the USB key?

• Driver Toshiba G450 with Vista32bit problem

  Hello.

  I bought a Toshiba G450 phone with 3G modem. It is tiny and really well designed.

  My computer is running with the 32-bit edition of Windows Vista.
  I first installed default Wellphone software supplied with default CD packed. Installation of the software is OK, but when I'm launching Wellphone XT, it tries to install the drivers for the G450 and it fails with pilot HSDPA. On the Device Manager screen, it is said, "pilots is not designed for this platform.

  So I dug a little short on this forum and read that I should use 3_7_671_33 version for Vista. So I downloaded suite url and launched the installation.

  Setup does not work. In the end, I'm launching WellPhone XT, which begins to re - install the drivers. But when she fails with driver HSDPA.
  On the Device Manager screen, it is said, "pilots is not designed for this platform. So I double click on the device and I try to update driver with HSDPA USB Modem\WellPhone XT\InstallDrivers\drivers\TOSHIBA\DRV_TOSHIBA_PIKE \WinVista folder, but it fails too.

  Do you have some instructions to make this device work?

  Thanks in advance.

  PS: With all due respect, It's a little discouraging to have a brand new, out of box material that does not work.

  Hey Buddy

  To be honest I put t have a laptop Toshiba G450 and I never had the chance to test a. So I can't help you resolve this problem.

  But a question: have you ever contacted an authorized service provider or operator of mobile telephony? In my opinion, they should be able to help you because most of the questions here are only on laptops and Windows so that you will not find any mobile phone experts here.

  Good luck!
  And if you have solved your problem, you can post it here again. Maybe that other users are interested too, and so your thread might be useful. :)

• Toshiba 40RL938 WiFi connection problem.

  Hi, I have a Toshiba 40RL938 Smart TV.

  I have a wireless access Point and I would like to connect my TV.

  No matter which network configuration option I choose Easy, assisted or manual.
  At first, when I enter the security key and configure all, it seems that it connects.

  There is a "Complete wireless configuration" information, IP and DNS address is automatically assigned (do manually didn't work as well). Technology tests the network connection and ends with information upward "unable connect network connection, check them as network settings." Is there something I can do, or perhaps TV is just broken?

  WiFi works fine for my computer and mobile phone. On the same distance from the AP television (about 3-4 meters, no wall or obstacles) the intensity of the signal's average on the TV and excellent on my computer. DHCP works very well. ,

  Can someone help me? :)

  In my opinion your problem isn t only connected to the TV but I think that it of a combination of your router, modem and settings.

  In my view, you must first disable all security options (encryption, password encryption, mac address filtering, etc.) in the settings of your router and the modem. Then try to connect the TV to your WLan again.
  If it will connect correctly, so you must change your encryption type.
  Also try different kinds of WLan standard as 802.11 A, B, G or N (if supported by the router)

• Toshiba ECO utility install problem on NB550D

  Hello world

  I bought a netbook NB550D and upgraded with a stick of 4 GB of RAM and Windows 7 Ultimate x 64. The computer now runs really faster than with the initial Setup, but I have some problems with some software from Toshiba. The ATI graphics driver is installed and the package of added value. But:

  -I'm not able to install the Eco utility. I tried several versions (also dedicated to x 64 OS), but I have to every time the same question during the installation process: installation stops suddenly, and a warning message box appears, but does not have any text contain. After that, the alternation istall is cancelled. Does anyone experience the same problem?
  -J' have also installed the utility Flash Cards, but the bar does not appear when you press the Fn key (shortcut keys work in all cases).

  Would appreciate the help, or the delivery of the driver versions that are suitable for win 7 x 64.

  Thanks in advance!

  Thanks for your comments and share this news!

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Guaranteed Toshiba HDD 200 GB - problem connecting to fingerprint

  I have a problem with my new Toshiba secured 200 GB HDD.

  I tried to create a new user by adding and confirming a new password.
  After that, the software asks to select a finger and opens a new window "save the finger."
  In this window, I have to drag my finger on the scanner until the progress bar is full.

  When the progress bar is full, a dialog box saying "registered finger" should appear, but I always and only the dialog 'Register finger' with the Cancel button.
  No more options than close windows and cancel new user process.

  Can someone help me?

  Thanks in advance

  Hello

  Have you read the manual of this product?
  It is worth mentioning how to remove registered fingerprints
  AFAIK the fingerprint sensor integrated allows only the person authorized to access to the files and stored data, but I'm not quite sure how fingerprints fingerprints can be registered
  Maybe a single finger, but this is only a hypothesis