Touch screen 10 driver error code
Original title: Touch screen driver
My Lenovo Thinkpad tablet 2 touchscreen stopped working and troubleshooting said that the HID I2C device has stopped working. (Code 10, failed to start)
Hi Chris,
I suggest you to consult the computer manufacturer's website and check if there is any driver available for the Tablet touchscreen.
Check out the link: http://support.lenovo.com/en_IN/downloads/detail.page?&DocID=DS033224
If there is no touch screen drivers available on the manufacturer's Web site, I suggest you to contact the Lenovo Support for assistance.
http://support.lenovo.com/en_IN/default.page?
Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.
Tags: Windows
Similar Questions
-
How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)
If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this
Here's a suggestion on how to do a 'clean ': install
[quote]
For testing purposes, it is best to install Windows "clean".
It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
This procedure is for Windows 7, Vista is similar (but has 2 service packs)You will need your installation/recovery DVD (s) before you start. Once you wipe the hard drive, there is no going back!
1 back up all your data.
It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.
2. connect the system to the internet (if the system shows then disconnect from the Internet, do).
3. use one of these free utilities to wipe the hard drive:
DBAN ( http://www.dban.org/download )
KillDisk ( http://www.killdisk.com/downloadfree.htm ).
This will also remove the system recovery partitions - so the installation/restore DVD is essential!4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!
5 visit Windows Update and get all updates
6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)
7 visit Windows Update and download the Service Pack 1 (normally under important updates). Read these notes for installing SP1: http://support.microsoft.com/kb/2505743
8 visit Windows Update and get any other available updates
9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).
If problems persist, then the problem is probably with your hardware.
Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys. 2004/2005 is a problem, 2009,2010 is OK. Updates are available on the Web from Asus site.
Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys). To update this driver immediately!
[/ quote] -
I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times. I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.
Alex
While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:
1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.
2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:
You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.
* My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.
http://www.Knoppix.NET
http://www.nu2.nu/pebuilder/ - Bart PE BuilderWhen you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows
And for future disaster recovery programs:
http://www.elephantboycomputers.com/page2.html#Backing_Up
If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!
-
Portege M400 - where to find the touch screen XP driver
Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
I looked on the site Toshiba driver but could not find them.Thanks in advance for your help,
Carbira1Hi mate
Take a look at the Toshiba driver page we
[Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]There you should find the Wacom Dual Touch driver for Windows Vista/XP
I think it's a good thing. -
Tecra S1: Empty screen and beep error Code appears
Hello
I have a toshiba tecra s1 and it no longer works, and I don't know why.
When I start the laptop there is nothing wrong, but after 3 minutes or if the screen is not responding. Then I tried to reboot, it gives a black screen and beeps. The beeps are:
short, short, long, break, short, short, short.And what he repeates himself. When I wait several days it will start again and then after 3 minutes it will "crash" again.
What is the problem with my laptop? Why it works, and after 3 minutes no longer works?
Thanks in advance.
Best regards!
Hello
The laptop starts fine in the Windows operating system?
Strange beep error code usually appears because there is a hardware problem on the S1 and the POST (power on self-test) cannot be passed correctly.
If the computer falls down the POST, the computer then returns a beep code indicating what is causing the computer not not to pass on the MESSAGE.The problem is that all the different systems of BIOS support meanings of different code.
As far as I know, Toshiba Tecra S1 uses Toshiba BIOS and only the ASP can read this code and know what it means. I recommend to contact the ASP in your country for assistance!PS: Check out this interesting page about additional information on computer POST / beep codes
http://www.computerhope.com/beep.htm -
HP Pavilion 23 "TouchSmart: optical drive error Code 19
Hi, the optical drive in my HP Pavilion TouchSmart 23 "does not work correctly. In Device Manager it says that it is the result of the conifguration in the registry being incomplete or damaged (error code 19), but I can't solve the problem. I tried to solve by updates driver and verification for the top and bottom filters using regedit, but none of those who were present. I can't find any other possible solutions anywhere. Thanks for the help.
Hello:
The only suggestion I can offer would be to go through the troubleshooting steps in the link below you haven't tried.
-
303 hard drive error code, how to replace
I have run diagnostics from the system on my laptop and learned that the hard drive has not give the error code 303. It came preloaded with 7 Home Premium from Windows OA. We do not have a backup image or installation disk. The laptop is old and out of warranty of 2 years.
Should what hard drive replacement options I look for?
Also, what options I have to install Windows 7?
News of the laptop:
product: HP Pavilion g series
s/n: [personal information deleted]
p/n: LZ514EA #ABU
Model: g6-1184sa
Hello
Firstly, regarding the disk HARD, your laptop is listed as coming with a 500 GB hard drive, but you can just as easily install a 750 GB HARD drive if you want a little more than space - readers at the following links are examples that would be perfect for your laptop.
The procedure to replace the hard drive starts on Page 54 of your maintenance & Service Guide.
Regarding the reinstallation of the operating system on the new drive, there are two options available.
1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office). They will also recreate all of the original scores, including the recovery Partition. The following link guess that you live in the United Kingdom.
Order recovery HP. - UK discs.
2 another option that you might consider is to create your own Windows 7 installation disc.
Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).
An example of a COA label can be seen here.
You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here. The source of the Windows Image is Digital River.
Windows 7 Home Premium 64 bit SP1.
Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx
You may need, additional drivers and software are here.
Kind regards
DP - K
-
Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code
The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.
Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.
Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.
The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.
I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.
Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.
Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?
[Edited by: admin on 26 June 05 20:19]
Hello
Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.
Good bye
-
Equium A110-233 drive reads not not drives - error code 39
Drive not reading all discs.
Something to do with the driver. Far as I can tell it says error code 39.Hello
Please try the first method:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553You will find a link to the MS site that provides a nice solution.
-
HP Pavilion dv6-7020us: driver error Code 28 problems
Sorry if this is kind of a long start...
Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...
First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»
Got Windows 7 x 64 bit installed.
Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.
The problem, however...
With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.
Now currently at a loss to know what to do...
Properties: Details: Hardware ID: value...
Ethernet controller
PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07
PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C
PCI\VEN_10EC & DEV_8168 & CC_020000
PCI\VEN_10EC & DEV_8168 & CC_0200
Network controller
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
PCI\VEN_1814 & DEV_539A & CC_028000
PCI\VEN_1814 & DEV_539A & CC_0280
PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FFOO
PCI Simple Communications controller
PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04
PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C
PCI\VEN_8086 & DEV_1E3A & CC_078000
PCI\VEN_8086 & DEV_1E3A & CC_0780
SM Bus controller
PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04
PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C
PCI\VEN_8086 & DEV_1E22 & CC_020500
PCI\VEN_8086 & DEV_1E22 & CC_0C05
(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04
PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03
Unknown device
ACPI\HPQ0004
* HPQ0004
Unknown device
USB\VID_138A & PID_0018 & REV_0078
USB\VID_138A & PID_0018
. . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.
Hello:
Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.
Ethernet controller:
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp56167.exe
Network controller:
This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.
File name: sp57538.exe
PCI device:
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp56166.exe
PCI Simple Communications controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp56158.exe
Controller of Bus SM: NOTE: first install this driver and restart.
This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.
File name: sp56156.exe
Controller of universal serial (USB) Bus:
This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.
File name: sp56164.exe
ACPI\HPQ0004:
This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.
File name: sp61037.exe
USB\VID_138A & PID_0018:
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
File name: sp56403.exe
-
Trying to access the hard drive - error code 0 x 80070005
I'm trying to be able to access my hard drive in my network and when I try to access my drive I get this error code
Hello
Maybe this can help,
Jack MVP-networking. EZLAN.NET
-
My son has a laptop Inspiron 15 with a 500 GB SATA hard drive. It's a little more of 2 years and is
little used.
Recently, it wouldn't boot into Windows. I was able to run Dell built-in diagnostics and all tests passed,
except for the hard drive. Returned message says Error Code: 2000-0151; validation 19717; bad hard drive 3rd = status.
Any ideas on this subject, other than replacing the hard drive?
Thank you.
dsmith8404
Error code 2000-0151 refers to a failing hard drive / has failed, you will need to replace the hard drive with a new one.
Bev.
-
portable device driver error - code 31
Gidday everyone,.
Rig = AMD Athlon II x 4 620 clocked at 2.6 ghz, 2 GB Ram, Win 7 Ultimate 32 bit SP 1 on Asus M4A78
bios mod-
config sys: ide to ahci (to improve the rate of the ISF, NCQ; using sata, ide, no raid)
reset for win 7
blue screen
back to ide
reset
www for solution - registry mod help:
KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci
CHG of DWORD from 3 to 0
reboot ok for Win 7
improve the exchange of data
started victory day
installed optional AMD - other materials, Storage Controller - AMD SATA controller,
published March 2013
Update said "with success."
Reboot as required by the update
Device driver error 31 on portable devices
(Two) WPD filesystem Volume driver
:-(
Active BIOS, no change
reset
BIOS - return to the ide
Restart
no change, still error 31
Restored AMD update
error 31 remains
hands up in the air
NB. earlier this year the experience even device driver error 31 on portable devices on portable devices for WPD filesystem Volume driver. Investigations at the time found no solution. However, think has an update of the applied victory since then "arranged" the error. The error was not apparent immediately before the update to AMD.
Grateful for the help please.
Have '
Hello
Thanks for posting your query in Microsoft Community.
I understand your concern and will help you solve this problem.
I suggest you try using the steps described in these Microsoft help articles and check if it helps.
What to do when a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctlyRestore a driver with its previous version
http://Windows.Microsoft.com/en-us/Windows/restore-driver-previous-version#1TC=Windows-7I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.
-
Xbox 360 Driver error code help 43
I've had my controller xbox 360 for about 6 months now and it was working perfectly until one day it just stopped working. She appeared peripheral unknown announced when I plug in to have usb port my keyboard and it says device not recognized error code 43 when I plug directly on the motherboard. I checked to see if it worked on my brothers laptop computer and it worked perfectly. I reset my computer. I tried to uninstall the Device Manager and uninstall the driver of accessories microsoft and re install both of them. I disconnected and uninstalled all devices on my computer and re installed them also. They work perfectly well. I tried to install manually from the Device Manager, but when I do this it does not appear in the list of drivers. I have been looking for a solution for about a month and have found nothing to help :( I use Windows 7 64-bit. I would be delighted if someone could help me
-----
Edit Message: Duplicate content copied on the wire:
I've had my controller xbox 360 for about 6 months now and it was working perfectly until one day it just stopped working. She appeared peripheral unknown announced when I plug in to have usb port my keyboard and it says device not recognized error code 43 when I plug directly on the motherboard. I checked to see if it worked on my brothers laptop computer and it worked perfectly. I reset my computer. I tried to uninstall the Device Manager and uninstall the driver of accessories microsoft and re install both of them. I disconnected and uninstalled all devices on my computer and re installed them also. They work perfectly well. I tried to install manually from the Device Manager, but when I do this it does not appear in the list of drivers. I have been looking for a solution for about a month and have found nothing to help :( I use Windows 7 64-bit. I would be delighted if someone could help me
Hi Rago,
Thanks for posting your query in Microsoft Community.According to the description of the problem, I understand that you are unable to find work controls XBOX 360 on your computer.When the hardware is installed in, or attached to a computer doesn't work properly, it is often because of a driver problem. Hardware and devices require drivers work correctly with a computer.I would like to know you have XBOX 360 wireless receiver to check if the controller is connected wireless to your PC?We will try to connect the Xbox 360 controller to a different usb port and check if it works.Tips for solving common driver problemsIf it still has problems, I suggest you to ask your question to the technical support of Xbox 360.
Hope that this information helps answer please with the State of the question to get help, we will be happy to help you. -
Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se
I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.
The verification of a KnownDLL failed. process ended unexpectedly with system
a status of 0 x 0000221 (0x007fb9c0 0x00000000).
The system has been shut down.
I don't have a recovery disc for this computer. I tried to order them, but they seem to not be available. It is my daughter's computer. She said she started having problems after you download Frost Wire (music sharing), and then she took. We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?
Hi Yprlvr
It is not possible to download records from the web site, but you can order and they will send you the discs for you. If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).
R
Maybe you are looking for
-
How can I change the phone number on my apple account
I lost my old number that is connected to my apple account and now I am trying to use the keychain, but his request a verification code that is sent to the old number. I was wondering if anyone knows how to go from the old number attached to my accou
-
my friend is that less training of technician I, so she asked me to help. She has a MacBook with this description (of on my Mac): Modellname: MacBook Modell-Identifizierung: MacBook5, 2 Prozessortyp: Intel Core 2 Duo Prozessorgeschwindigkeit: 2 GHz N
-
We always used standaard duplex until a few months after a update for the HP printer, now he can't keep remembering settings. I need to reset duplex printing before each printing. Very annoying. You can find it under: Preferences/options tab system/t
-
How can I set up a timed loop to run at the entry, rather than waiting for the first time in delta? If my delta time is 10 seconds, I get my first run after 10 seconds. I would like to run the loop when he entered at the start (0 seconds) then wait e
-
Someone at - it a response? Thank you!