TouchSmart HP Envy 15-J109TX drivers

Similar Questions

• TouchSmart HP ENVY 15-j134na: TouchSmart HP ENVY 15-j134na drivers

  I installed all the drivers and programs of this place

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5401191/model/7450852/drivers

  but, could not find two drivers work for TouchSmart from HP ENVY 15 - j134na on windows 7 x 64

  1 Bluetooth controller

  2 unknown device ACPI\HPQ6007

  Help, please

  You are the very welcome.

  Well, you don't need 3D driveguard when you have an SSD because there is no mobile headed for the Park, but I don't know why the driver will not be installed.

  I have a HP 6930p with an SSD and I managed to install the driver 3D driveguard.

  Try that and if that does not work, I wouldn't be worried...

  Go to Device Manager and click on the unknown device of 6007 needing a driver.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver and then software option at the bottom of this window, select the let me pick from a list of drivers for devices on my computer.

  Click disk, and then navigate to: C:\SWSetup\sp66078\Install Files\Win7\accelerometer and select the HP Mobile Data Protection sensor from the list and see if the pilot goes like this.

• HP Envy 15-j109TX Touchsmart computer laptop upgrade help

  Hello, my HP Touchsmart Envy 15 - j109TX laptop computer is shipped with 2 GB DDR3 NVIDIA GeForce GT M 740 graphics. Can I put graphics or higher cards of 4 GB DDR3 NVIDIA GeForce GT M 750 ?

  Also, I want to upgrade the RAM to 16 GB and a 2 TB HARD drive . Is this possible? I don't see any customization option in the HP Shopping Web site. So how can I do? also, thanks for mentioning about cost of upgrade of these.

  Hello
  
  Here are the specifications of product: http://support.hp.com/us-en/document/c04031367
  
  Go through the Page 4 and 5 of the user manual:
  http://h10032.www1.HP.com/CTG/manual/c04091768.PDF
  
  Upgrade options:
  Up to 1.5 TB drive HARD with no hybrid NAND support
  
  Up to 16GB 1600 MHz RAM with boost DDR3L dual channel
  
  Although Nvidia 750 M dedicated 4 GB card is indicate against the graphics options, I think not that this is possible because actually nvidia in this model is not as a card but more a chip which is attached to the motherboard. I think you need to contact HP in your area directly for this.
  
  It will be useful,
  Thank you

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• TouchSmart HP Envy 14 - laptop occasionally starts with black screen

  Hello and thank you for taking the time to look at my problem. My laptop is a HP Envy Touchsmart 14 8.1 Windows running. The product name is HP ENVY 14 Sleekbook TS and the number is E0M45UA # ABL

  My problem is that my computer occasionally starts with a blackscreen with my mouse in the Center. I can move the mouse but it will return to the Center after a few seconds. I can't seem to do anything but hold the power button and shut down my computer. After that I open it again, can I use my normal computer. I recently did an update of the BIOS of my computer and I don't know if that is causing the problem. How can I solve this problem?

  Hi Shibein:

  Thank you for your inquiry.  You can run the HP Support Assistant click here to help solve the problems and search for updates.  You can also run the ' HP PC Hardware Diagnostics UEFI" click here." "I am also sending documentation on " Touchpad, keyboard, or a mouse ",click here, and ' computer will start (Windows 8)"click here. If none of this has solved the problem, you can try to restore the bios updated"Bios restore" TouchSmart HP ENVY 14-k110nr Ultrabook support" click here, or restore your computer to a date when it was working fine. '" Here is a link to 'use the Recovery Manager to restore the software and drivers (Windows 8)'click here. If you need help can you give us the exact model on HP Envy Touchsmart 14 you have.   "How can I find my model number or product number?" click here.

• I need drivers TouchSmart HP ENVY 15-j021tx Notebook PC

  I need the drivers for my TouchSmart from HP ENVY 15 - j021tx Notebook PC i7 windows 8.1

  Hello:

  Here is the link to the page of the W8.1 driver for your laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5390972

• TouchSmart HP ENVY 14-k111nr Sleekbook Drivers - Windows 7 64 bit

  Hello

  I'm trying to get drivers 64-bit of Windows 7 for this: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=6841179&

  TouchSmart sleekbook and can't find what works.  I tried those many other posts and am not having any luck.  Are there drivers for this particular model?

  Thank you!

  You are the very welcome.

  Here is the link to the wireless card driver you need.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405431&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_129459_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Envy 17 of Touchsmart m7-j078ca Windows 7 drivers (downgrade)

  Hello!

  This forum rocks! It has already helped me get Win7 working on my laptop. However there are still a few features I could not find the drivers for. I did a search through these forums, but still could not find anything. These are the devices:

  PCI device
  ----------
  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00
  
  USB Universal Serial Bus controller
  --------------------------------------
  
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1966103C & REV_05
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1966103C
  PCI\VEN_8086 & DEV_8C31 & CC_0C0330
  PCI\VEN_8086 & DEV_8C31 & CC_0C03
  
  Unknown device
  ------------------
  ACPI\HPQ6007
  * HPQ6007

  I apolgize if I started a new thread on an old theme, but there was some chipset drivers & usb drivers I have tried, but they don't seem to work. Any help would be greatly appreciated!

  Thank you!

  James

  Hi, Ben Moussa:

  Here are links to drivers for the devices:

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521489 & sw_lang =

  USB USB Bus controllers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521489 & sw_lang =

  Unknown device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521489 & sw_lang =

• TouchSmart HP ENVY 15-j151sr: where are the drivers for my laptop?

  I bought my laptop with windows 8.1 and all the drivers have been installed. I can't find drivers for my laptop after reinstalling windows 8.1. Where can I download it?

  Try again. It is reported that the problem is solved.

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• HP TouchSmart Sleekbook ENVY 4: A single work of helmet

  I have problems with the headphone jack on my computer. The speakers sound as great as usual when the headphones are not connected, but when I plug my headphones, only the left one works. This is the first time I had no problem with my computer. I tried to download the IDT HD Audio Driver, but that did not help at all. My computer is a HP ENVY TouchSmart Sleekbook 4-1115dx.

  Thank you!

  Hi there @jane_14,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you are having problems with the sound on your helmet, but your speakers work.

  I looked into the problem for you and I don't have a document for you to try for troubleshooting, but I also have a few questions to ask you.

  1 have you tried another pair of headphones?

  2. you hear any distortion of the other head phone?

  3 have you tried to use the HP Support Assistant to update all of your drivers?

  This is the HP document called solve the headphones and headphone problems (Windows 8).

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Thank you!

  Have a great day!

• HP TouchSmart Sleekbook ENVY 4: no sound after upgrade Windows 10

  No speakers or headphones are connected.
  Windows Update 10 does not provide an update of speaker
  HP Support Tools does not win 10 drivers.

  Product name: HP ENVY TouchSmart Sleekbook 4
  Serial number: (deleted content)
  Product number: C2K73UA #ABA

  Message from system tray: no speakers or headphones are connected.  Playing Audio Troubleshooter found no solution.
  Windows Update 10 does not provide an update of the speaker.
  HP Support Tools does not win 10 drivers.

  Deleted the two drivers listed under sound Manager devices, but t
  The drivers listed are high Drfinition Audio Device and IDT High Definition Audio CODEC
  The CODEC driver has an icon in the shape of a yellow triangle next to him.
  Updated the CODEC driver results in error:
  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  IDT High Definition Audio CODEC

  Machine has 8.1 then updated to 10. Windows 10 has been altered somehow a few weeks after the update. It took Microsoft store and they did a routine repair of Windows 10, which re-installed 10. At this point sound was gone.

  Product name: HP ENVY TouchSmart Sleekbook 4
  Serial number: (deleted content)
  Product number: C2K73UA #ABA

  Recently, I had the same problem. Technical support had me to download the drivers for Windows 8.1 still and my sound returned. The explanation is that not all drivers have been created for Windows 10 again.

• TouchSmart HP ENVY 15-j009wm: TouchSmart HP ENVY 15-j009wm does not read USB Flash Drive after Downgrade to Windows 7

  I've demoted installed Windows 7 with Flash Drive but I need help. Windows 7 doesn't read my Flash drive more? He can read my USB keyboard but does not read a USB Flash drive.

  I have no Internet on the computer, so that means I can not update my drivers. And I have a few drivers in my flash drive I want to install, but I can't.

  I read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td...

  It not me any more because I can't access my USB drivers

  Hello:

  Looking at your other posts it seems that you have yourself painted in a corner.

  Since there is no inheritance or the setting USB auto in the BIOS, your only option would be to remove the hard drive, then put it in a USB drive enclosure sata hard laptop, plug in another PC so it can be read, download the drivers there, you need and copy to you user profile on the hard drive removed.

  Chapter 5 maintenance manual provides the procedures of withdrawal and replacement for the hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03733656

  Reinstall the hard drive, run the drivers, and you should be good to go.

  These would be the drivers you need for your model...

  SM bus controller: install this first and reboot.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  USB3: Install these two and restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

• TouchSmart HP ENVY 15-j040us Notebook PC-problem with internet gambling after upgrade to 8.1 windows

  I have a HP Envy 15-j040us Notebook PC Touchsmart is currently using 8.1 64-bit windows.  I play 2 Farmville on Facebook.  I started having problems after installing Windows 8.1.  My mouse hesitates and reluctant game and I can barely move on the screen.  I am not real computer savy but can follow directions if you can just tell me what I need to do to correct this.  Everything on the screen is just very slow and the mouse does not seem to want to go where I'm pointing to it.

  Hello @aodom ,

  Welcome to the HP Forums!

  I see that you have any questions, play Farmville 2 since the update to Windows 8.1.

  First, update the drivers for your graphics (GPU) with the following download: driver Intel graphics high definition (HD).

  Once you have done this, update Adobe Flash player plugin with the following download: Adobe - Flash Player

  Once you have updated the GPU and the Flash Player, disable hardware acceleration for Flash on your laptop:

  1. Right click any where on the Farmville game once it has loaded.
  2. Select settings.
  3. Make sure that you are on the tab display/graph (see image below).
  4. Clear the check box to enable hardware acceleration if it is available. If you are prompted to activate the control of your webcam or microphone that these steps do not apply because the game is not trying to use the acceleration.

  

  Let me know if it helps.

• Computer TouchSmart HP Envy 17 t 2 weeks without a break stop at or just after the connection

  Hello

  I really need help because I am pulling all my hair out with frustration. Here are the details:

  I got a new Notebook HP TouchSmart 17 t for my birthday last week. I'm a developer and a code about 15 hours a day, and my laptop 15 inch 3 years was certainly an obstacle. Needless to say, I was very excited by envy, especially 17-inch screen.

  That excitement lasted about 2 days.

  In the first two days of use, I installed all the Windows, Windows updates 8.1, Chrome, Visual Studio, SQL Server 2012 and Management Studio, MySQL Workbench, Adobe Creative Cloud, MS Office, and Avast. The system will periodically re-start during this time, but he wasn't even epidemic.

  But from about the 3rd day, the computer began to stop more frequently. Initially, it was once every 30 minutes or so, but then increased rapidly so it restarted at or just after the login screen 9 of the 10 startups. Every 10th reboot or so, the computer will allow me to connect and I immediately try troubleshoot it before it will re-start again in 5 minutes or less.

  The only thing I could think of that changed on the 3rd day is I installed Kaspersky to replace Avast (the laptop came with a 1 year free Kaspersky subscription). I didn't know if it was the culprit, or if I had a lemon of a computer that was overheating because of hardware problems, but to be sure, I tried to uninstall it. However, the computer wouldn't stay long enough for me to do.  I couldn't even in HP Recovery to restore the system.

  Fortunately, I had burned the recovery DVDs and was able to start the recovery tool by booting from the DVD. I restored the computer configuration with minimal additional software installed (restore failed the on the first trial to 99% complete, but the second test was a success). I was really hoping this would solve the problem so I can start using my new laptop.

  No luck.

  The first time I turned on the computer after the restore, it immediately starts close to, or just after the screen connection again. As before, I am able to use the computer for 5 minutes every 10th reboot or so before it restarts. During those rare moments, I was able to enter the power management settings to turn off sleep and Hibernate, given that several forum posts which indicate as a potential culprit. However, the computer won't stay long enough to install updates of window or Windows 8.1, or to ensure that all drivers are up-to-date.

  Furthermore, I believe that the BIOS flashed when Windows 8.1 has been installed and I wonder if it needs to be reset. (I don't think the restoration process reactivates the BIOS to its original settings, but I have really no idea.)

  Anyway, here I am with a new laptop that I can not use.  I don't know if it's a driver problem, software conflict, hardware problem, problem of BIOS or something else. Needless to say, I am very frustrated and I would really appreciate suggestions.

  Thank you

  Tom

  Tom, welcome to the forum.

  This isn't how HP computers to run.  I strongly suggest that return you it and get another HP computer that works.  If it does not work long enough to install the updates, it will very probably not get much better.  I want to help you to save your hair!

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.