Try to add a new hard disk to m7657c

Similar Questions

• In vSphere 5.5 customer web, when you add a new HARD disk, cannot create as thick.  Gray disk provisioning.  No one knows why this happens?

  In the vSphere web 5.5 client, which is now where he should go to add a new HARD drive when you upgrade the VM version to 10... When I add one, I do not get the option to change the disk configuration.  Any ideas as to why?  It is an engine out of VM, with no snapshots:

  

  The virtual machine lives on a NFS datastore with no HW accel. ? If so, that would explain it.

  / Rubeck

• New hard disk and overcommitment WARNING

  I'm trying to add a new hard disk to a virtual computer on a NFS datastore that applies a provisioning. Our NFS volumes are set to auto grow, if they reach a certain threshold. This normally isn't a problem, and so over-provisioning us like crazy.

  Recently, however, we encountered a problem when a new hard drive size exceeds free space in the data store. He responds with the following error (creation of a to 1.99 VMDK):

  PowerCLI D:\ > new-disk-hard - VM $vm - CapacityGB (1.99 * 1024)-$datastore data store

  New-hard drive: 04/08/2014-10:44:09 new-harddisk for the VirtualMachine-vm-10964 entity failed with the following message: "not enough disk space on the data store"datastore1".»

  Perform the same task in the vSphere Client generates the following warning, which can be bypassed by clicking 'OK ':

  

  I tried to create a smaller drive and increase it, but I get the same error. I do not see a - Force parameter or anything equivalent. Is it possible to approve via PowerCLI?

  The ThinProvisioned switch is an option, or which is in conflict with the NFS configuration?

• Help!  How to add a new 350GB disk?

  Hi all

  I was tasked with the addition of an extra 350GB disk to a virtual machine in a configuration, I discovered it's done not as easily in Lab Manager as it is in vCenter.  I cancelled the Setup and when I go into the properties of the VM I see 'add the HDD', but when I go to add the new drive with the size you want it only allows me to add a maximum of 167 GB (the remaining space on the LUN that VM is enabled) as expected.  I have a new 550 GB LUN I want to create this new drive 350GB, but I do not get a choice where to create the new disk.  Can someone help me please this seemingly simple task?  Thank you

  BTW - I use Lab Manager 3.0 (2) on ESX 3.5 HP blades

  If you add a new HARD disk in your virtual machine in the Lab Manager the disc is placed in the root directory of die VM.

• Add the new hard drive in a txt file

  Hello

  I have list of virtual machines under 'cluster1' and there are specific VMs on a txt file and add thin secondary 10 GB to those virtual machines.

  New disks will be created in the data store: DATASTORE1

  Cluster_name: Cluster1

  Can you help me on this. Thank you.

  Get-Content C:\VMs.txt | %{
    $Cluster = Get-VM -Name $_ | Get-Cluster | Select -ExpandProperty Name
    $dsname = "DATASTORE1"
      }
  
    New-HardDisk -VM $_ -CapacityGB 10 -DiskType Flat -Datastore $dsname -StorageFormat Thin
  }
  
  

  Try like this

  Get-Content C:\VMs.txt | %{

  Get-VM-name $_.

  New-hard disk - CapacityGB 10 - flat DiskType - data store "DATASTORE1" - StorageFormat thin

  }

  If the TXT file contains all the names of virtual machine, there is no need for the cluster.

• Add the new virtual disk to vm

  What is the command to add a new virtual disk to a virtual machine?

  Use the cmdlet New - hard drive .

• I have itunes 12.4.  When I try to add a new song to icloud music library I see the following message: results of genius cannot be updated because the iTunes Store does not recognize your iTunes library. "Then said to turn off genius, no not such optio

  I have itunes 12.4.  When I try to add a new song to icloud music library I see the following message: "Genius results cannot be updated because the iTunes store does not recognize your iTunes library."  He then ordered me to turn off Genius, and then turn it back on.  There is no option.  Othe impossible of access devices correspond to these songs via itunes.  Any help would be appreciated.

  Hello Subocz E M.

  Thank you for using communities of Apple Support. I see that you had problems adding pieces and turn off Genius. I know how it is important to be able to add music to iTunes. I'm happy to help you.

  Since you are being invited to turn off Genius, you can add music, please use the following information to resolve these two issues:

  Turn on or off the Genius

  If iCloud music library is enabled, you cannot disable Genius.

  Choose file > library > Genius (toggle Genius).

  Turning off the Genius Genius Genius Shuffle shuts and and the Genius Mix.

  12 iTunes for Mac: use Shuffle Genius, Genius or Genius Mix playlists

  Have an amazing day!

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• Hi guys, I have a problem with my cc of muse, sometimes I try to add a new widget that I downloaded, but my muse says 'check if a new version of muse is out' what could be the problem because most of the widgets I want to use cant load in my library

  Hi guys, I have a problem with my cc of muse, sometimes I try to add a new widget that I downloaded, but my muse says 'check if a new version of muse is out' what could be the problem because most of the widgets I want to use cant load in my library

  Hello

  Muse 2014 is actually not the most recent version. Adobe has recently released the Muse of 2015. Your Adobe Creative Cloud application should notify you when new updates are available.

  I uninstall Muse 2014 and install Muse 2015 if you have the required hardware and software.

  System requirements | Muse

  Kind regards
  Thomas

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• Add a new virtual disk to a very critical existing VM

  Hi all,

  My question is very simple. I have to add a new virtual disk to an existing Windows Server 2008 Standard virtual machine (we use vSphere 5). This machine

  is very critical, because it is the server of the company files. Is there a risk to add the new virtual disk on the virtual computer? Is it better to add it with the virtual machine died, or can I also in the virtual machine running without risk? I tried with a virtual test machine and everything works fine and I know to be very paranoid, but in this moment I still feel a great responsibility on me.

  Thank you all.

  There is nothing wrong by adding a disk to a virtual machine, it is HOT add, that is the advantage of the SCSI layer. VMDK all use a virtual scsi controller and it is hot add capable. SO just, add it and partition.

• Can't see vmdk file when you add a new hard drive to an existing vm

  I'm trying to attach a vmdk file that was recovered from a backup as a new hard drive to an existing test VM (version of the vsphere 4.0 client). I was able to successfully download the file in the data store but it is not available to select when I try to add a hard drive, on an existing virtual machine. The vmdk file has been recovered from a backup server no idea why I can't see it would be very appreciated

  Something does not fit here.

  Since the file names "...-0000003..." this seems to be a delta (snapshot) rather than a virtual disk of dish (base)! Thanks for posting (tie) the hard header file to see how it looks like and to know what lack us.

  André

• New hard disk dive on Satellite C855-29N

  Hello

  I have a breakdown of total hard drive with my laptop Satellite C855 - 29N 64-bit Windows. I ordered a new hard drive for replacement. My problem is that although I did back up disks of my damaged disk before it failed, I fear that these disks will not work for the new hard drive.

  I would appreciate your advice on what I need to do to reinstall the operating system and any contact: e-mail, phone numbers or any other useful tips.

  Thank you very much.

  Why not? Recovery media created has no limitation. Many people Exchange original HDD with the most recent or even SSDS. I did the same thing and I installed after Exchange, original image of recovery without any problem.

  Just, without panic. ;)

  Exchange HARD drive, set the BIOS to the default settings and try to install the recovery image using recovery media created.
  If please post comments and do not hesitate to ask if you need help.