Try to install Windows 7, no device drivers were found

Similar Questions

• Lenovo Y50 cannot install Windows 7 - no device drivers were found

  Hi I just bought the laptop Lenovo Y50 and wanted to install windows 7 Home premium 64-bit instead of preinstalled windows 8. I use the external dvd drive because there is not an intern. I had to change the start of the legacy settings to boot from usb. However when I get to the part where I press "install windows" error comes up saying that no device drivers were found. I am able to navigate and see my sheets but not able to select one. Help, please! Thank you in advance.

  Moved to other/unknown install, upgrade and activate Forum.

  You should consider dual-boot instead:

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  Return the laptop if it came preloaded with Windows 8 and purchase one already preloaded with Windows 7, they are always available:

  http://www.ZDNet.com/where-can-you-find-a-PC-running-Windows-7-7000013418/

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Look at the dual-boot

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  That follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista

• 'No device drivers were found' - installation of Vista on Satellite A200-1NH

  Hello

  I try to install Vista in my Satellite A200-1NH. After the serial key of Vista, I get this message:

  No pilot of the plane have been found. Make sure that the installation media contains the correct drivers, and then click ok

  I downloaded Intel Matrix Storage Manager and put it in USB flash then I traveled to the location USB but same message.
  Any help?
  Thank you

  As much as I know, that this model of laptop comes with Vista and the Vista installation, you can use recovery DVDs.
  Do you mean that the HARD drive is not visible for the installation of Vista?

• Hard drive does not appear when you try to install Windows 7 ultimate x 64

  Hello

  I have a problem, try to install Windows 7 x 64 on a Compaq CQ56

  When I get to choose the drive where I want to toion install windows noting appears it seems that I don't have the drivers for my HARD DISK

  can someone give me the right drivers for use in installing windows 7 for this model, or information about how to install windows 7 x 64 on this computer

  My Info to the computer:

  Name of the product CQ56-130EP product number XH199EA microprocessor 2.1 GHz AMD Athlon II Dual-Core Processor P320 microprocessor Cache L2 1 MB of memory cache 3 GB memory DDR3 (1 x 1024 MB + 1 x 2048 MB) Memory Max supports up to 8 GB memory DDR3 graphics ATI Mobility Radeon HD 4250 Graphics video memory video card up to 1405 MB graphics memory total available screen 39.6 cm (15.6 ") diagonal high definition HP BrightView display led) 1366 x 768) hard drive 320 GB SATA Hard Disk Drive 5400 RPM Media Player SATA optical drive: LightScribe SuperMulti DVD±R/RW with Double Layer Support network card 10/100BASE-T Ethernet LAN connectivity, wireless 802.11 b/g/n sound generic, stereo keyboard full size keyboard integrated with action pointing device Touchpad keys and quick launch buttons with we / Off button and 2-way Scroll cushion support External Ports

  Hello

  I formatted the drive with Acronis True Image Home, then he showed in the Windows installation

  Thanks for your help.

• try to install windows 10 Windows 7

  I try to install windows 10 Windows 7 and it keeps just restart in windows 7 and nothing installs, help

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

  Hello
  When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
  When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

  At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

  Hello

  Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

  However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

  Check it out!

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• When I try to install Windows XP Professional on my laptop, I get a blue screen that says "error(C=0000135) found dll gdi32not.

  install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  original title: I install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  Hi Vytautassvitojus,

  ·         The computer have any OS installed?

  ·         Are you able to boot to the desktop?

  If you are not able to boot to the desktop and then remove the external devices except the keyboard and mouse, perform a chkdsk from the recovery console and then try to install Windows.

  To run chkdsk from the Windows Recovery console. You can check the links for a description of the Windows XP Recovery Console

  http://support.Microsoft.com/kb/314058

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  I hope this helps.

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• Try to install Windows 7 but the grip to install in the "collection of information".

  suspended in the "collection of information".

  Try to install Windows 7, suspended in the "collection of information".  Any suggestions?

  How long you wait to determine that she is hooked on collecting the information?

  You try to upgrade or clean installation?

  You disconnect all devices non-essential connected to the computer before attempting the installation?

  If you are upgrading from a previous version of Windows:

  1 disable any security software before attempting to upgrade
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during installation

  My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during Setup after loading files? Configuration
  ZOTAC GE Force GTX 670
  PSU Antec 900 W
  Intel core i7 - 3770 k
  Card Asus P8 Z77 - Mother V PRO
  WD 2 TB hard drive

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Windows Server 2012 0 x 3701 - when you try to install Windows Backup

  Hello:

  Thanks in advance for any help you can provide.

  Windows 2012 - build 9200 - when I try to install Windows Server Backup - I get the error "the installer has encountered an error - 0 x 3701.»  The referenced assembly is not found.

  Outside the GUI installation, I tried the command line "ocsetup WindowsServerBackup" - I get the same error.

  Any help would be appreciated.

  Rafel

  You would be better served in the Technet/developer forums.  As you have no doubt noticed when choosing your category as the other/unknown - it is a final consumer - not a business oriented one oriented forum.  :-)

• Please help with uninstalling windows live photo gallery and windows live writer. I can't uninstall this from my add or remove a feature from the program. Whenever I try to install windows live essentials for xp, it fails due to errors due to the photo li

  I can't uninstall w.l.p.g. in Add or remove a program. The window appears and says "unable to find the program that created it. I think I need to remove all Windows Live completely from my computer before I can install the new windows live essentials for xp. Whenever I try to install windows live It fails.  the error for which says "hr:0 x 80070643" you have an older version of windows live photo gallery and it cannot be deleted. the version I have is 12.0.1347.0718. I was able to remove the high-end windows live essentials on my computer, but he left behind the photo gallery and Webcam live writer. I can't delete live writer either.  Please help thank you P.A.

  How to uninstall a specific Windows Live Essentials program
  http://windowslivehelp.com/solution.aspx?SolutionID=c861e66a-c839-47C4-a1d5-46b46121fb5d

  How to uninstall Windows Live Essentials (all programs)
  http://windowslivehelp.com/solution.aspx?SolutionID=64db5c80-85E4-49fe-BF07-cb08ffc5dd53

  You will find support for all versions of Windows Live Essentials uninstall/reinstalling in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO