TS-L632D DVD +-RW Drive problem

Similar Questions

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• P30: DVD - RW drive problems

  I was recently unable to watch DVDs on my satellite P30 using my DVD player (MAST * a DVD-RAM UJ-820 s). My dvd settings have been set to code 1 when I bought the laptop. Since last week, I get an error message 'Error reading media' when I try to play the dvd. All decoded still play dvd. I tried to use other programs other than the windvd installed and windows media player, but it certainly isn't a software problem.

  Can someone help me with this?

  Hello

  You can try to make a firmwareupgrade of mast * one site!

  But when the disc or only the lens is damaged we must change the entire disc!

  When you are sure that it's a hardware problem, you should contact a Toshiba Service partner. The technicans check drive and maybe change it!

  campino Bye

• Satellite A135-S2386 - DVD - RAM drive problems

  Hi guys, I have a Toshiba Satellite A135-S2386.
  I had once repaired because it is over heated and died.

  One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
  I fixed in March, April. But I'm used to, I can anyway...

  However, there is a significant problem.
  Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
  As XPInstallation Windows, Vista install detects it but BIOS can't.

  Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
  Or I can update the BIOS of the machine itself?

  You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

  You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Driver DVD ROM & DVD + RW drive problems

  For some reason any time my DVD Rom and my DVD + RW readers had a problem. In Device Manager, I get a yellow exclamation and error "damaged or missing. (Code 39) "Apart from these TWO discs. Can anyone help?

  It is a common problem with the Windows operating system. Microsoft has created a tool to solve this problem. You can run the tool of the Internet link following which will identify the problem and solve the problem:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• CD/DVD ROM DRIVER PROBLEMS

  WHENEVER I TRY TO INSTALL THE NEW SOFTWARE TO A CD ROM IT DOESN'T SE NOTHING HAPPENING WHEN I RAN MICROSOFT FIX IT HE DETECTED A PROBLEM, IT SAYS CODE OPTIARCDVDRWAD-7563AATA 10. IT SAYS CONTACT MANUFACTURING. SOMEONE CAN ME SAY ANOTHER OPTION.

  or you could possibly answer the question and let the mods redirect?

  Saqueena, this is a pretty General error. http://support.Microsoft.com/kb/310123 let us know if find you a solution in this KB and post back.

  MCP. MCDST. LVL 80

• C100 CDRW/DVD-RW driver problem

  Recently, my player is undetectable.  I don't see what this is likely to have changed its status and am also having trouble finding a solution.  The device control panel, the model is:

  HL-DT-ST DVDRAM BGMEA - 4082N.

  Can anyone help?

  I tried drivers.com, downloads.com and I'm wrong.

  Thank you very much.  It is now fixed.

• Portege M200 error - CD/DVD drive problem - Code 39

  I have a problem. I would like to perform a recovery on my m200 Tablet System.

  I have a dvd external drive (as the m200 has not built into the player) and the correct recovery disk.
  However, because of a problem that occurred some time ago, there is a problem with the driver (+ Windows cannot load the driver for this hardware device.

  The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.

  If someone knows a way I can fix the driver, or another way to perform a system restore, it would be extremely useful!
  A solution to the problems of one or two would be great.

  Thank you very much!

  Hello

  > The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.
  Are you sure about that? This code appears in running the operating system but recovery doesn't run under the operating system currently running.
  Please try to start the recovery procedure and let me know exactly what is happening.

• Problem M30 Satellite DVD - RW (drive SD-R6112)

  I have a satellite SM30-106 with a SD-R6112 DVD/RW drive. When you enter the drive says DVD - RW drive in my computer. The marks on the drive itself where the eject button says dvd rom/r/rw. However, when you go into the properties of the drive of the pilot says dvd - rom info. When you put in any blank DVD disc, it does not recognize or recognizes a CDRW. I tried Nero etc, but nothing seems to write. When you put a dvd - ram disc in and click dvdform it says no disk is not inserted. Software DVD RAM supplied with the machine, but nothing seems to want to write on DVD or CD - RW. Please can anyone suggest a solution?

  Hi Clive,.

  First of all, I don't think that the SDR6112 can handle discs DVD-RAM at all. According to the specs of the device, it will load only DVD-R/RW and CD-R/RW. I assume it's the least format the discs you are trying.

  Secondly, is this a recent problem or was it always like this? If you right click on the device in my computer, there should be an option on one of the tabs to allow digital writing please make sure of course that this box is checked.

  Finally, you can reload the drivers of devices (from the Toshiba website) and see if it improves the situation.

  HTH

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Equium L300 error - CD/DVD drive problem - Code 39

  * Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) *.

  This message appears in the Device Manager under CD/DVD ROM drives for my laptop and does not have any cd / dvd.

  I don't know a lot about my operating system or your laptop computer in general except that it is a Toshiba Equium L300 under Vista Home Premium

  Can someone help me with this you problem?

  You are looking for in this forum for solutions and similar discussions?
  I remember that this was already posted and discussed several times here in the forum.

  I remember that the solution is simply. the upper and lower filters must be removed from the registry key.

  As I have said; Forum search option allows to get more details!

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• CD/DVD-RW Gone driver - problem Code: 39

  My daughter was playing Sims2 on his PC Pavilion and one day it was fine, did a update through Windows - that automatically happens - next day my cd/DVD-RW driver - disappeared.  This is the problem report, I get:

  Description

  Signature of the problem

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: IDE\CdRomHL-DT-ST_DVDRRW_GSA-H20L___S853___

  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}

  The PnP problem code: 00000027

  Driver name: cdrom.sys

  Driver version: 6.0.6001.18000

  Driver date: 01/19/2008

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello Mayasmommi,

  Thank you for your message.  Click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Optiarc dvd rw ad 7280 s ata device has a driver problem

  "" How can I solve this problem of pilot-"optiarc dvd rw ad 7280 s ata device has a driver problem" and error 19

  I am using windows 7 Home Edition

  The does'nt of the computer recognizes the optical device

  How can I SOLVE this

  E-mail address is removed from the privacy *.

  Thank you

  Hello.

  -Run these attach the.

  http://support.Microsoft.com/kb/316529/

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116