TTS Server and test a prompt for text

Similar Questions

• Configure the remote server and test

  I installed Dreamweaver CS 6 and 10 CF and MS SQL server on the same computer.

  I use Dreamweaver CS 6 to create a test web site and to set up the remote and testing server.

  Dreamweaver invite me to enter the host name and the full directory.

  I would like to know what I need to enter information?

  hostname is localhost?

  complete diretory will C:\inetpub\wwwroot or C:\ColdFusion10\cfusion\wwwroot?

  Your information and your help is much appreciated,

  Kind regards

  iccsi,

  Iccsi,

  Yes. Host name to the title of "Test Server" is the hostname of the server test - in your case, since you're using CF, it must be the path in which CF works. It will be localhost:8888 or something similar - depending on what port you have configured for the webroot when installing CF. you could check in CF dashboard. Or, you could start CF server, open your browser, enter localhost. If the loading of the page Web of the CF by default, it's just localhost. If this isn't the case, add the port number.

  The remote server is your real Web server. It may be http://www.somesite.com or if you run it in a separate folder within your main site, it will be http://www.somesite.com/test - depends on you want to download the files of remote work.

  The complete directory under local configuration is the place where your files are located on your local system. Still, if you use CF, you can thus use CF webroot to create / store files - this way, you don't have to make copies of files in 2 places since that you configure the same folder as your test server too.

  -ST

• Attempt to send a invoice in QuickBooks and I am prompted for a name and a password, which will happen never before. How can I find them?

  I use QuickBooks Simple Start. I send 2 bills every week. For more than a year I have 2 invoices by e-mail. Last week as today a box appears requesting a user name and password when I click on send.  I don't know what they are. Help, please.

  Thank you

  Howard

  You can ask your e-mail Service provider.

• Joomla! CMS and tests on localhost

  I am now on DW cs5 and I have a simple (I think) question. If running mamp, etc with no problem and using DWcs5 (mac) if I set up a Joomla! 1.5 installation in my htdocs in the MAMP folder and then (here is the heart of the matter) set up my files the in my usual directory on another part of my hard drive, do I have to install all of the fileset install Joomla to my local and also test files? (This issue does not arise with previous versions or other Web design software because they did not get the (beautiful!) "Live VIew/Live Code and other facilities available in DW cs5 dynamic cms." I'm a bit confused. It seems to me that the answer must be that for me edit a local copy of, for example, index.php, then he ask to use the Live View/Live Code, when it may well need to access other Joomla files in other parts of the files server MAMP tests means that two records of local server and test need the complete install-especialy with third party such as Rockettheme templates that use the portal infrastructure. Can someone tell me please? Thank you.

  To test dynamic websites in Dreamweaver, normal is to use the same folder for local files and the test server. Set up your local site in htdocs. Otherwise, Dreamweaver should copy files and dependent files whenever you test something.

• ERPI configuration: data server and the physical schema

  Hello
  
  I use ERPI11.1.2.1.
  
  I try to configure ERPI following the documentation of erpi_admin.
  
  It is said that to create the database server and the physical schema for ERPI, I must develop 'ERP Integrator' in the tab 'Physical Architecture' in the Manger of the topology of the ODI.
  
  But I have no 'Integrator of the ERPI' node 'Technical' below in physical architecture :-(
  
  Thanks in advance for your help
  
  Fanny

  You need technology that works on the basis of data of the ERPI. So if your the ERPI on Oracle database, expand the Oracle technology and then right-click and choose Insert database server.

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• laboratory test for 2008 Server and clients

  I'm new to vmware and I hope to have a preview on if or how I can create a mini enviornment for testing 2008 Server and clients.

  (Study for MCITP)

  I am running:

  Windows 7 Professional 64 using vm worksation 7.1.3

  Intel Core2 Extreme 6850 @3.7 GHz

  8 GB RAM

  RAID 0 SSD

  Guest operating system located on 2 drives internal seagate 7200 RPM

  Linksys wrt300n router

  I already did a team and installed (1) Server 2008R2, (1) WinxpSP3, Ent of Win7 (1), Clone of Ent Win 7 (1)

  I would like to install 3 server roles, AD, DNS and DHCP for beginners.

  I am considering establishing a separate virtual lan for systems work in that I can do my tests.

  Providing a static IP address for the server and using dhcp by server for customers of victory.

  I also want to create another team, so I can do some tests with SBS 2011 so without interfering with the first team and or my home network

  Any advice or comments would be greatly appreciated.

  Thank you

  I thought that someone has already done and was hoping a ' oh yes, that's what you do, it's easy "answer...

  Yes I could do that and these questions have already been answered ad nauseam, but I'll tell you why I do not give indications of the steps step-by-step when I see things like "(Education pour MCITP)" and it's because if you can't figure it out on your own, you are not qualified to be a professional anything whatsoever in my book! "   Now please don't take that as harsh as it may seem I have really don't mean that highly however the point I'm trying to do is, especially when it is currently professionally, with labour or professional certifications, I certainly don't expect any who all know on a given topic a, but what I expect is a part to be able to find the answers that are already out there When it is not the very first person to come across a given number.

  I gave the server a static ip address, I booked on the router and used in bridge for the adapter. AD and DNS has worked well, but the dhcp service has failed. It seemed at odds with the dhcp router.

  Of course, it will conflict with router DHCP Server of the local physical network when you use bridged on a virtual machine running a DHCP server, it is basic networking question.

  Is there a way to do a virtual router? I want the team to be separate and not have the ability to 'see' my dhcp router, or any other PC.

  But I need to pull the static information and dns somehow.

  It's there, reading the chapters 14 and 15 are along with networks in general orders and there are several diagrams in these two chapters which, in my opinion, help to give you the answers to these questions.

  There are several ways to reach your goal and I know for a fact that he has already covered by these forums and other places on the Internet it seems ridiculous to repeat it once again here and beside that you really learn if responses are just handed to you vs student, research, practice, etc..

• VirtualMachine.Admin.Name and asking the user for the name of the server

  I need to allow end users to designate the name of their server requested when you submit a request through VCAC. I do this using VirtualMachine.Admin.Name in the custom of my blueprint properties and it prompts the user to set.  I have also some scripts that run with the heel of building put into operation once the server is built which require me to enter the VC:VirtualMachine object for the server with the name of the server.  It does this in a loop in a table of all the VC:VirtualMachines met my VCenter server and find a match on the name with an xpath expression.  The name of the server is collected inside the cutting-edge designer using the getVirtualMachineName activity.  This activity is integrated into the designer and aims to do exactly what he says.  He then handed the name in the VCO workflow.  Not much, really.  I have used this method a lot in the past with VCAC.

  Problem:

  
  Recently, I started running this script on a new installation of VCO (5.5.1) and the new instance VCAC (version 6.0 - 1720522) and I see a very strange behavior.  When I get the name in the tip with the activity of getVirtualMachineName Designer, the name is that name WOULD have been affected had I pressed VCAC to automatically generate name for me using a prefix of machine profile.  Remember that you must associate a prefix of the default machine on your group of companies.  This is the prefix that is used to generate the name and associate it to the server in VCAC despite the fact that I am more precisely the substitution of this name automatically generated with the VirtualMachine.Admin.Name custom property in the custom of my blueprint properties.

  The strange thing is that the server is correctly named in the VSphere console and inside the guest OS.  In other words, the name that the user places in the VirtualMachine.Admin.Name field is what you get in the console VSphere and BONES.  So that part works.  Then why is he not being correctly named in the VCAC VirtualMachine object?

  EC which claimant misnamed is originally my workflow to fail.  I can work around this problem in the workflow, but I fear that there is still problems on the road if the alias is associated with the server inside VCAC himself.

  Once again, I did this with earlier versions of VCAC and VCO and not had this problem.  Anyone else seeing this?  I'm doing something wrong here?

  The custom property to use to allow a user to enter name themselves is the host name (just hostname, nothing else)... That's what I put to prompt the user to our forms.

• Cheap construction and Simple Home ESXi Server to test

  I think building a desktop computer (you can call it home server) for VMware vSphere Hypervisor to test at home for educational purposes.  I am currently using a > 6 yr old Dell laptop which does not support VMware vSphere hypervisor.  I have no luck in my workplace to have hands on VMware.  Course VCP5 is expensive here in Malaysia, about 3 times salary for a fresh grad. If you have savings of 1/3, should be save to just sign up for the course of 9 months.  Also I would need to take leave of 5 days on the course, they have no weekend class.

  My plan is to set up for lab test (VCP5 test) and possibly configure 4 virtual machines.  What are the best way to build that ESXi server to test?

  Processor - AMD FX-6100

  http://www.Newegg.com/product/product.aspx?item=N82E16819103962

  Motherboard - ASRock 960GM/U3S3 FX [Micro-ATX]

  http://www.Newegg.com/product/product.aspx?item=N82E16813157323

  RAM - 16 GB (2 x 8 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800)

  http://www.Newegg.com/product/product.aspx?item=N82E16820231606

  Adapter - Realtek 8111E (shipped with Mobo)

  HARD drive - WD Green WD10EZRX 1 TB IntelliPower (do not plan for any RAID installation)

  http://www.Newegg.com/product/product.aspx?item=N82E16822236070

  Box - COOLER MASTER Centurion 5

  http://www.Newegg.com/product/product.aspx?item=N82E16811119068

  Power - COOLER MASTER eXtreme Power Plus 500W or COOLER MASTER GX 450W RS450

  I have experince in the building of my own office back in the years of the pentium - pentium 4.  But I certainly have no experience in the construction of a system as complicated as, I am a total newbie to VMware.  I need your need help and tips to avoid buying machines bad for my setup.

  my budget would be RM3000, which is about USD1000. (Now I think I can get USD600 below after opt for AMD on Intel Core i7)

  Thank you

  * Some links that I found

  Hardware configuration

  http://wahlnetwork.com/2012/03/13/building-ESXi-5-whitebox-home-lab-servers/

  http://vdestination.com/2011/01/19/building-a-home-lab-101/

  Configuration (configure lab environment, do not apply to me)

  http://professionalvmware.com/2012/05/vSphere-5-autolab/

  http://www.simple-talk.com/sysadmin/virtualization/VMware-Lab-Setup---a-virtualized-lab-for-testing-HA-and-DRS/

  http://www.VMwarevideos.com/video-my-home-VMware-vSphere-lab

  You don't need a San to install ESXi, but if it's under consideration for the VCP that a SAN would be beneficial, as would a second host ESXi - in this way you will be able to test vMotion, DRS, HA-

• Data type of text is not displayed using SQL Server and ASP/VBScript

  Maybe someone help me with this because I used to use PHP/MySQL, but I use for this a Classic ASP/VBScript and MS SQL Server instance and I don't know that much. The scenario is I have an old site that was designed using html tables and I do a CSS/XHTML update on Visual design. As long as we are here, there are some pages that are dynamic and use a MS Access database and we thought it's a good time to upgrade from MS SQL Server (2005, to be exact). No time/money for bringing classic ASP VBScript in ASP .NET.
  
  Overall, the upgrade went fairly well, especially just to create a new connection to the DB in SQL Server in Dreamweaver after all the tables and data were migrated to SQL Server. Almost everything works as it should. A problem though.
  
  For some reason, the data of the data type 'text' in SQL Server is not appear (or sometimes appear). I even tried to recreate the recordsets and binds fresh data and the code is more or less identical to what we had before. Anyone know what's happening, or how I can get this data to show?
  
  I think that there is perhaps some simple and double quotes in the text data and which could be screwing things up. I was hoping there is only a simple function that I could apply the code, but as I said, I don't know.
  
  Thanks in advance for any help you can provide.
  
  -Bill

  captcashew wrote:
  > Maybe someone help me with this because I used to use PHP/MySQL, but for this one
  > instance I use Classic ASP/VBScript and MS SQL Server and I do not know
  > that much. The scenario is that I have an old site that was designed using html
  > tables and I do a CSS/XHTML update on Visual design. As long as we
  > are there, there are some pages that are dynamic and that use a MS Access
  > database and we thought it's a good time to upgrade from MS SQL Server
  > (2005, to be exact). No time/money to classic ASP VBScript in ASP.
  > .NET so.
  >
  > Overall, the upgrade went quite well, especially just needed a new
  > connecting to the DB in SQL Server in Dreamweaver after all tables and data
  > have been migrated to SQL Server. Almost everything works as it should. One of the problems
  > If.
  >
  > For some reason, the data of the data type 'text' in SQL Server is not
  > appear (or sometimes appear). I even tried to recreate the recordsets and
  > binds fresh data and the code is more or less identical to what we had
  > front. Anyone know what's happening, or how I can get this data to show?
  >
  > I think that maybe there are single and double quotes in the text
  > data and which could be screwing things up. I was hoping that there is only a simple
  > function I could apply the code, but as I said, I don't know.
  >
  > Thanks in advance for any help you can provide.

  Your text field should be the last of your select statement, as
  its not stored in the table with the other data, its stored elsewhere,
  as a binary object, should be treated differently. Its common
  the migration of the access problem.

  If you need more of 8000 characters stick with him, otherwise use
  varchar (8000) or nvarchar (4000) If you need (limited unicode characters
  4,000 cos of the double byte characters)

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• Bytes of TCP IP and subset of bytes for the connection of server and clients

  Hello

  I have a problem on the server and the client connection using the TCP/IP protocol. In the client, I have 41 cases, 1 case of timeout, others are for the case of button when they are pressed and then the LED on the server will be to market and if a click again the led will be off. But when I reached cases 10, 11, 12 up to the 41 (key case), that the LED lights if you click only once, but when he double clicked then the light does not turn off. So, how you solve the problem? Is this subset or bytes to read because the first subset is 1 case but no 10 to 41 will not work, but I change the subset in 2 then the case works for don't light the LED, but it do not work to turn the LED off.

  I also download the vi in this for reference.

  the user name for the client is the user and the password is pass.

  Thank you

  Hi ican.

  you have not changed the customer. See the attached picture. The error in the server side, it's that the 4 was connected on the two functions of split to the length. See Server for the necessary difference image.

  Mike

• WPSM54G cannot find print server and not able to print the test page

  After several days of trial and error I am so far I'm willing to give up and put this peace of equipment for sale. It is my last attempt to find a solution.

  I have a Canon MP510 printer connected to the print server and I managed to configure the print server so that it establishes a wireless connection to the router. I can see the ip address assigned to my router print server and I can log on to the configuration of the print server page.

  When I want to set up your computer (software print copy of the Canon MP510 print server) I can not complete the wizard. Step 1 is successful. It shows the print server and the MP510 related to port 1, but in step 2, I get a message that the print server can not be found.

  I looked on the forums how to solve. I already tried a fixed ip address to configure the printer manually but not any which solution worked.

  Your print server must be set to a fixed IP address, try this IP address: 192.168.1.78... Disconnect ethernet cable between your router and the PS... Both devices power for one minute cycle... Follow the link here after changing the IP address on the PS...

• I brought an Android application for BB 10 and tested on BB Q5. My video of Live TV and VOD App is not playing, but only Audio is audible

  Error display error 701, 702 and 801 802 etc. in the error list lgact while trying to play the vidoe on BB Q5

  My Android app to stream Live TV and mp4 m3.u8 for VOD

  Here are the mistakes of chat Log then tried to launch the app on BlackBerry Q5 Ported

  E/ActivityThread (28622947): could not find the info provider for com.google.plus.platform

  E/ActivityThread (28622947): could not find the info provider for com.google.plus.platform

  13:02:19.970 11-11: W/MediaPlayer (28622947): info/warning (701, 0)
  13:02:24.228 11-11: W/MediaPlayer (28622947): info/warning (702, 0)
  13:09:40.041 11-11: W/MediaPlayer-JNI (28622947): MediaPlayer finalized without being released

  E/MediaPlayer (28622947): 801 unknown message Type

  W/MediaPlayer (28622947): info/warning (701, 0)

  E/MediaPlayer (28622947): 801 unknown message Type

  W/MediaPlayer (28622947): info/warning (701, 0)
  W/MediaPlayer (28622947): info/warning (702, 0)

  Please solve this problem

  What kind of protocols are suported HLS, RTSP or RTMP to play live TV streams and VOD on supported android smartphones BB?

  srk2012,

  See all exceptions in logs (LogCat output) which could refer to a problem? If so, could you post a snippet of the track.

  If you need help pulling marbles, you can reference this article:

  http://devBlog.BlackBerry.com/2013/11/pull-Android-logs-from-your-BlackBerry/

  Also, what OS you are testing against? 10.2.1?

  Justin