Tuneling works in lan not internet

Similar Questions

• Satellite U400 and WXP - No WLAN LAN not internet

  Hello everyone and thank you for reading my post.

  I just bought a new Satellite U400 - 12R PSU40E and installed quickly clean Windows XP 32-bit with SP2, the installation was flawless after changing HARD drive in compatibility mode mode. Downloaded and installed all the drivers from this site for my model which included the Realtek network drivers for the Marvel Yukon for the LAN and wireless. No yellow dot in the currency manager and the system is just perfect.

  However, for the life of me, I CAN NOT connect this bloody thing for any LAN or WLAN, the funniest is when I connect the LAN cable in my office in it, the little icon in the status bar displays connected and all of the ip addresses are correct, same COMODO starts to automatically download the updates and full updates after a while but I can't surf the internet to all.

  I even installed Firefox and chrome and with any 3 browsers I can browse the internet, even if all the anti virus, COMODO, or windows firewall all turns off.

  Please help me in anyway or advice or pointers I might have missed.

  Thanking you in advance.

  Reza.

  Thanks for the comments! :-)

  I had the same problem as you for years. I had Zone Alarm and if I close this application I do not have access to internet. Thus, the application should still work.

  However, I hope you don t also this problem.

• How to get PCoIP working for LAN for Internet Clients?

  A bit confused and I can miss something simple.

  We have a simple configuration, a connection to the server view 80 LAN based clients... everything was many years and we are on version 5.3.4.

  We have added a certificate to our login server view, punch a few holes through the firewall and makes connections work on the internet.

  To get that to work with PCoIP, I had to check of course the PCoIP Secure Gateway and PCoIP URL specified and external address correct external IP from our view connection to the server.

  This works perfectly on internet.

  But making internal LAN clients switch PCoIP because they get the external IP address and they have problems with this... If I uncheck the 'use PCoIP Secure Gateway PCoIP connections to the desktop', then the LAN clients connect through PCoIP very well.

  Our firewall is managed and hosted by a third party.

  How is it possible to make the customers and LAN clients on the work of the internet at the same time?  How LAN clients can work when check the option use PCoIP IP secure gateway address external to the URL and this is the external IP address of the server view connection?  Is a firewall issue or am I missing something simple?

  In most environments, there will be separate for internal and external connections connection servers.  We're associated with a server security for external connections, and the other will be internal only.  This will allow you also to the connection of tag servers to restrict internet access.

• Work wireless, but not Internet

  I use a WRT54G Router.  I am able to connect to my home network via the wireless but no Internet on any of my wireless devices.  It works only via Ethernet.  The firmware version is v3.01.3.  Any ideas what I did wrong?

  Hi mullahraheil, to properly isolate the problem, try changing the name of the network wireless and communication channels. Try the channels 11,9,3 or 1. Try to reconnect. If the same persists, you need to maybe do a hard reset on the device and reinstall it from scratch.

  To make the correct reset, please press the reset button at the back of the router for 30 seconds when the unit is turned on. Unplug the unit. Reinstall everything from scratch. Hope that helps.

• At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  original title: server and virus problem

  Hi SurajMendon,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.

  Networking platform

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• When I connect my hotmail account, I can't open any folder, the Inbox, the new message,... everything seems normal, but when I click on something, it isn't responding.and it doesn't see the error.it works very well in internet explore.

  When I connect my hotmail account, I can't open any folder, the Inbox, the new message...
  everything seems normal, but when I click on something, it isn't responding.it works very well in internet explore.

  I think the next thing to test would that interfere with Add-ons. Disables the Firefox Add-on - Add-ons that only list compatibility with Firefox 5, but some add-ons could cause problems.

  To test, the simplest method is to restart Firefox Safe mode.

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then, try help > restart with disabled modules > continue in Mode safe (do not check the boxes). This article gives more information on the options and features of Safe Mode: Safe Mode.

  What is fix? If so, you may have to disable some add-ons.

• WIFI adapter does not work and can not be detected

  Hi guys,.

  I use HP Pavilion Dv4 3106tx. I don't know what happened, but out of no where my wifi sort adapter stopped working. whenever I have activate my wifi button, bluetooth doesn't work and does not display the icon of wifi which usually shows at the bottom right of the taskbar. I also checked Device Manager > network adapters, the wifi card is not there. I also tried "Search the hardware changes", but still there is not Wifi adapter appears.

  Right now I'm just connect via ethernet for internet connection because my wifi does not work.

  Can you help me out here guys...

  Thank you!

  Hi @pooroontong

  Welcome to the Forums of HP Support!

  I understand that your wireless network is most obvious in your systray or in Device Manager. I'm happy to help you.

  The first thing to do is to take a look at this page which deals with the problem you describe. Try it and let me know if you need help most.

  Universal solution WLAN, Wireless and Wi - Fi errors

• Accidentally deleted Windows Explorer (not Internet Explorer)

  Looking for a way to download or restore of Windows Explorer (not Internet Explorer).

  First of all, in response to the first question below on the race "explore c: /" when I did that, the local directory c: came. Should I do something more about it? I still hope to restore Windows Explorer.

  What you have proven this response is that Windows Explorer is still there and still doesn't work as it should for any aspect you gave (although again, just the startup and power use Windows, see your desktop, etc turns works in Windows Explorer.)  What I'm saying is that there is nothing to 'restore' in have you seen/shown so far.  You have a Windows Explorer.

  If there is something specific, you can say is missing, maybe we can help.

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• WRTG54S to connect to the network, but not internet

  I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

  Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

• Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Hello, this is a display caused the extension Advisor default McAfee site - please try to disable or remove that in case you have now until there's a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My safari has stopped working and will not charge

  My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.

  Try to open Safari in safe mode.  Make sure Safari is no longer running, the black dot in the icon on the Dock should not be visible.  Hold down the SHIFT key while clicking on the Safari icon.  If Safari loading, the problem is related to the third-party extensions or plugins.

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

• my app store on my 6plus does not work... not load materials... Help, please

  my app store on my 6plus does not work... not load materials... Help, please

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559