Two sequence settings

Similar Questions

• Sequence settings

  I've seen the videos saying not to worry about the sequence settings - just drag the new icon of the sequence and start. But what of this situation?

  My project will always contain images of two thirds of the clips: usually psd, 6000 x 4000 when cropped, 3:2 aspect ratio. It will be 1/3 video clips, 1920 x 1080, native 60 fps. So if I have a drag the icon of new sequence to begin, I have a sequence with 6000 x 4000, 29,77 fps, and if I start by dragging the video on the new icon of the sequence, I work in the sequence format of 1920 x 1080, 59,97 fps. These two have square pixels format.  Each sequence must the stills and video clips - mixed. To make a high def product over for Projection on a computer screen (or USB stick) or maybe Blu Ray, I probably want to a final product to 1920 x 1080 - is that correct?

  So if I work with a video sequence of size, videos naturally adapt to the screen, but most of the clips, still images, must be scaled down to 27% to fit the screen. (However, which now leaves a lot of space to enlarge and reposition the parts of the image when desirable ("Ken Burns effect").) And if I worked with a sequence of 6000 x 4000, I scale videos to more than 300%. Here are a few questions:

  1 should I set the sequence with still video and mixed media not best for 1920 x 1080, give me leeway to blow and reposition the stills?

  2. start with 'Set to the chassis' when displaying of full image fixed - before that it has blown up or repositioned?

  3. I suppose that my output will be H.264, but am unsure of the preselection: (29.97, 1920 x 1080, etc. - or maybe H.264 Blu - ray). Suggestions?

  4 am I wrong don't not downsizing first stills (at this point, that would be quite annoying and time consuming)?

  Thank you very much

  KDOC (Keith)

  1. 1920 X 1080

  2 NO.

  4. you will take a performance hit if you do not reduce the stills.  Use resize a selection in Photoshop.

• Two sequences with different parameters?

  In the first Pro CS6, is it possible to use two sequences with different parameters?

  Yes, no problem.

  You can make as many sequences with different settings as you want.

• Fact in export DV using "Match sequence settings.

  I'm VHS and Hi8 video capture using a Canopus ADVC-300 and Premiere Pro CS6.  The output is DV, approx. 14 GB/hour.  Most of the catches are unattended (have a 4 TB drive, supported of course, but space isn't a big concern at the moment).  I would get everything imported before any serious editing, so I capture each strip twice: the first time, the video itself; then I go back, turn on the indicator timestamp overlay and capture again with the camera works at speed x 2.  This way I can quickly find after a particular segment of a band recorded without winding the Ribbon around the camera, looking for the scene and the time is not superimposed on the image.

  I have two questions:

  (1) given that the catches are unattended, I need to cut the blue screen at the end of each captured files to save disk space.  I want to confirm that if I cut a sequence and export with game "Match sequence settings", this first reencode the DV except the parts that I've actually changed (I sometimes use the dip to black around damaged segment of tape).  Based on the speed of export, I don't think it's recompression and quality looks the same but I want to check a second time.

  Premiere Pro CS6 always mark the timeline with the color bar if treatment is required?  "Dip to black" parts get a yellow bar, but the rest has no bar.  That would be a clue.

  Also, the export dialog box has "Use rendered maximum quality" unchecked by default.  I check it - does it matter?

  (2) what is the best way to permanently associate a DateTime with the captured video? I don't see anyway to bake in the DV for each segment.  I use comments in sequence marks, established at the beginning of each clip, but the sequence markers do not move if I have ripple - delete, let's say 10 seconds of noise in the middle of a track.  I can't figure out how to get the markers attached to the video track instead of the sequence.  I found a few videos that say how to do this, but they do not seem to apply to CS6.  I found that if I export the sequence, the markers can get supported in DV.  But I need them to stay if I ripple-edit.  Is this possible?

  (3) my plan is to add a title overlay second 3 or 5 at the beginning of each segment to say what it is and where it was captured, but only for the final export.  Is there something I could use to create a heading for a spot?   This isn't a big deal, but it looks like a useful feature.

  Sorry if the answer to these questions is obvious - thanks for your patience.

  1. on a Windows machine PP will make a copy of simple file for executives not corrupted when you make the DV, DV without transcoding.  You need not (and should not use) sequence settings to Match for that to happen.

  2 clip markers are defined in the Source monitor Panel, not in the sequence.

  3. copy/paste is about it.

• How can I run two sequences simultaneously on the same object to measure

  I'm turning two sequences in parallel on even the UUT (own USE) so that I can put a piece of equipment to a certain State while starting a timer at the same time.  How can I do this in the sequencer teststand?

  You can run a sequence (or a subsequence if you just need a timer) in a new thread (just choose "use new thread" in the call of the sequence)

• Laptop is very slow with two sequences of black screen.

  Hello world

  My Acer Aspire 5552 G Win 7 SP1 (64-bit) laptop has been extremely slow starts lately and I think I know what the problem is just not how to fix it.

  A little backstory. Recently, my computer has been infected by a trojan. The incident occurred three weeks ago (26 December) when I was sent a link (which supposedly contained a picture of trade offers) on Steam which directed me to download a file (.scr). I downloaded but he was suspicious of being (.scr) file extension. So I scanned with my antivirus (Kaspersky Internet Security 2015) and it has not found anything. (I should also mention that when you click on the link to access the site Kaspersky also has not blocked the site either).

  I stupidly executed the file (I have the permit after UAC) and the Trojan horse went to work. My Steam profile all my friends malicious links sent to the same link of that initially, I downloaded the Trojan horse. She also sent the commercial offers of my Steam account.

  After having read what made the Trojan horse, I immediately rebooted my computer in safe mode and performed a full scan with Kaspersky. In conclusion scans Kaspersky detected a piece of malware, a Trojan horse - Ransom.Win32.Blocker.gbqs. I was very worried at this point because I didn't want my hard drive becomes encrypted. Kaspersky was able to remove the Trojan horse.

  I restarted my computer in normal mode and everything seemed fine. However, I was paranoid that Kaspersky may have missed other malicious programs. So I downloaded and installed AVG, Malwarebytes, Spyhunter 4 and McAfee Scan Plus. All of these additional programs never detected any virus or Trojan horses (although Spyhunter 4 detected many internet trackers).

  So I uninstalled these additional programs and now I just Kaspersky. It's been three weeks constantly restart my PC and so far I have access to all my files and disks, so it looked like Kaspersky has successfully eliminated this ransomware.

  Now to my problem actually is (as indicated in the title). My laptop undergoes two sequences of black screen.  One is after the windows logo start (approximately 45 seconds) and after the Welcome screen (which is about 5 minutes).

  It's very annoying. Before all this started my laptop took only about 45 seconds of the power on button office ready.

  I appreciate any help, thanks.

  Hello

  Can you please try to perform a mode of boot, which will start Windows with only a minimal set of drivers and services.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  If please download MiniToolBox and save it to your desktop. Double click on it, select list installed programs and click OK. A journal is open, please send the contents of it in your response.

  Download CCleaner from here. Once installed, open it and head over to the Tools tab, and then select start. In the lower right corner, select Save in the text file and select a name for it. Open the saved document and display its content in your next reply.

  Thank you

  Legaede

• How gang together two sequences or a clip so I can move in tandem and keep them locked together.

  How gang together two sequences or a clip so I can move in tandem and keep them locked together.

  To group the clips, they must be in the timeline, not the project Panel. Below you can see that I have selected two clips and selected a group on the shortcut menu.

  

• weird bribe to .mxf video in some sequence settings in setting up first

  I have a big project mainly composed of .mxf files saved with a Canon xf100.  An interview in particular do this weird thing when one of the clips are placed in a timeline set as his videos, the video seems normal.  When I copy this video in another fixture with different sequence settings video appears as if the Middle vertical pixels have been stretched to the left and to the right.

  I tried to copy it to the other video content to the sequence with this one interview, and it copies correctly.  However, as soon as I click videos stuck together, I get the error seen in the third picture and closed unexpectedly on me first.

  Please see the pictures below.  All images were shot with the same camera settings and I used Media Info Mac to ensure that color space, rate, codec profile, bit depth, extension, etc. is the same.   If he has no idea why this interview has been damaged please let me know.

  

  Thank you Ann.

  I updated my drivers and nothing has changed.  In the end I just transcoded the original files in Pro Res 422 and replace the corrupted in my project files.  From and to the top!

  If anyone has this problem I'd love to hear a plausible explanation of the suggestions on how to avoid it in the future.

• Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?

  Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?
  The clips I have are HD and .mp3. MTS files.

  In the latest version of Premiere Pro, it is possible to change the settings for the sequence.

  You know what settings are best knowing what you are doing.  (Personally I'm fan of formal education for this.)  I know that sounds sarcastic, but, there is no right answer to the question whose parameters are the best.  There are many variables here, then... you really need to know what you're doing.

• Transcode all sequences of editing in Premiere Pro for DNX175X? The sequence settings?

  About 30% of my digital SLR 8 bits and AVCHD .h264 turned needs significant noise reduction. So I use Neat Video4 in After Effects to reduce noise and can export images with large bands on issues DNX175X 10 bits to help avoid gangs. Also, for sequences requiring a minor noise reduction I'm considering export as DNX36 8-bit in order to avoid the huge file sizes. Is there a reason that I shouldn't do this? Should I export all as DNX175X?

  Also, I wonder should I transcode all my images on my first pro at DNX editing or is it better to let the images not requiring reduction of noise in its original format? Also, once put in the own DNX images are the parameters of my project sequence? He would remain AVCHD 1080 p or should it be changed by DNX175X?

  Thank you

  Sheree

  Hard drives are fairly cheap.  I generally recommend getting more than better to worry about running out.

  Export all as DXxHD 175 x.  Yes.  (In fact, I convert everything even before editing, as the handles so much better than H.264 DNx.)

  The sequence settings are pretty irrelevant, as long as you have resolution rates and necessary framework.

• When you create a new project, the "new sequence settings" step doe appears not automatically, what to do?

  Hello

  I have a question I make videos of product for a company that they would do that to me in a 16:9 format and in HD. Because they do not know on which channels they want to publish, but it is certain that they will publish on youtube I wanted to do it in the settings HDV and DVCPRO HD 720 p 24 or even 1080 p 24. I bought the license to create online and for some reason that I don't have the option at the beginning when I create a new project to change the settings for the sequence. They do not appear, and then I can not change. Guys do you have any idea what can be done in order to access this setting before the project opens in the end?

  I'd appreciate strongly any help in this matter!

  See you soon,.

  Mascha

  This option is no longer available in the current versions of first. Once you click OK in the new project dialog box, you can then create some sequences that you like new sequence in the dialog box. You can also return to any order and change them through the sequence settings.

• Why my media wants to export in MXF format when I match sequence settings?

  I did movies with first CC before and never had this problem, I'm going to export, I click on the box to match my sequence settings and it will export an MPEG, and now she wants to export in MXF format. My computer does not recognize the MXF files. Is there a reason why this might happen?

  If your export correspond to the parameters of the sequence is now mxf. Check your codec in the sequence settings. This is what match sequences of uses.

  Why do you want to use the match sequence settings, it's for a quick review of your film with a codec overview of lower quality.

• Apple Prores sequence settings Question

  Hello-

  Sorry if this is a newbie question, but I recently made the jump FCX first cc and I'm running on a question.

  I don't have an option when you create a new sequence for Apple Prores 444 HQ.  Is it possible that I can add this format so that it is an option?

  If not, is there a recommended, then best thing should I choose?  Here are the options I have:

  

  Select an item in the project bin and drag it over the icon of a new element, which is right next to the Trash CAN. He will choose a sequence for you to match the clip. Didn't need to be named 'ProRes' specifically; Instead, what you are looking for, is the sequence settings to match images, such as 1920 x 1080, progressive, 29.97, aspect 1.0 pixels. Or whatever the case may be.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• trying to deform stabilize 4 k images and then reduce to 1080 p before exporting it but error "string stabilizer requires clip dimensions to match sequence settings try nesting.

  I have a 8 min long 4 k sequence where all the video clips are the same size k 4. I can warp stabilize just fun but when I go on change settings for the sequence to 1080 p and then right click on each clip to scale to the framework I get error "string stabilizer requires clip dimensions to match sequence settings try nesting" the reason why I want to warp stabilize the 4 k images rather than 1080 p images is because with 4 k I have a budget of high culture, I can get away with before I got to the bottom of the scale, string stabilizer settings I use are in the jpg I have attached. I tried visualization of nesting videos online and I can't find what I need. As the now the only viable option I must deform stabilize 4 k and export under 4 k and then open a new project and import the stabilized 4 k images exported and reduce the sequence to 1080 p. I'll do that if I have to, but it will take a lot of time coding without a doubt. Any help is greatly appreciated.

  If the images do not match the sequence settings and you want to use the chain, you'll nest.

• Error: too big sequence settings. Now: How to export?

  I'm new on the first (and video editing), but I've spent many hours during holidays past learning and producing a short video.

  The first media in that I included was a large image. I think it is the reason why the sequence settings are big: 4928 x 3264 pixels (I didn't know on the sequence settings at all).

  Next, I added my video clips, recorded in DV 720 x 576 format.

  Now I understand why video clips appear to be scaling over 500% to fullfill the frame!

  I saw a video on the sequence settings, and it seems that the settings sequence reduce the CPU usage when editing (Preview in real time). Good to know!

  But my question is: can I export a video of good quality with this settings?

  I tried DV PAL and H264 + DV PAL, producing large files: 250 MB or 2 GB for a 10 min. video, with a horrible video quality.

  I'd appreciate any help to avoid to repeat the entire process.

  Thank you!

  Kin

  If I understand correctly, you want to do is export a video in 720 x 576, in this case, you're better off get the right sequence rather than the intensification of the sequence settings and then back down to export.

  You neglected to declare you what version of Premiere Pro. It's always a good detail to include, especially in this case because the parameters of the sequence becomes editable in CC7.1. So if you are on 7.1 or later, you can change the dimensions of the sequence to match your main content by right-clicking in the sequence in the project Panel and select sequence settings. If you are on an earlier version, then the best way to go is to create a new sequence with the desired settings and copy and paste everything from the old order to the new. You'll then come back scaled to 500% to 100%.