Ubuntu to load black screen

Similar Questions

• Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

  I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

  The last attempt to resume the system from its previous location failed. Attempt to resume again?

  With the 2 following options:

  1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

  2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

  But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

  Please notify.

  Thank you very much!

  Hello

  I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

  Kind regards

  DP - K

• MacBook Pro 15 10 bootcamp load black screen Windows

  When I try to load windows on my computer 10, after stopping the wheel spinning, I'm left with a black screen and occasionally the cursor. I was wondering if anyone has a solution because I'm very reluctant to release zero/restore my windows partition as it was working fine before the next time I turned on the computer and other forums seem to lean toward a display problem. Thanks for any help

  Do you have any active Windows automatic updates?

• Windows Vista won't load - black screen each laptop time starts

  I have a Dell Insipron 1525, which does not load Windows Vista.

  I can't go past the Recovery Manager screen every time you start, and although I tried all the options available, it does not open in safe mode or normally.

  I tried the system restore (even if it says that it cannot find valid 'points'), as well as the repair of the system, and I have also run the Diagnostics, who said there is no error (although I could not see the final report). All paths lead ultimately to the black screen and although I can see and move the cursor, it is that I can get. Any ideas please?

  Thank you very much!

  Hi ZD_123,

  ·         Did you the latest changes on the computer?

  ·         You receive an error message?

  I suggest you follow the provided article and check if it helps.

  http://support.Microsoft.com/kb/946532

• YouTube load black screen for the first five seconds

  As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

  You can check the problems caused by the recent updates of Flash and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Satellite L40 dosen't load - black screen

  When I turned on my laptop today I just had a black screen.
  Says battery fully charged, but if I turn off the power the light disappears.

  The led drive usually flickers, but is it not also.
  Can someone please?

  I tried to install Windows to new cd Vista recovery disk and it worked for 2-3 days then the same problem black screen nothing works!

  Please help me I have not installed any hardware or changed any material!

  It is a toshiba Satellite L40

  Thank you

  Hello

  You should try to first remove the battery and disconnect the power adapter for about 20-30 min. after that time reconnect both part and try to start Notepad.
  Usually, this should help to restart the laptop.

  In addition, a BIOS update must be performed.
  I read that a BIOS update resolves many strange problems and that I myself remember the black screen problem could be solved also.

  So check it out and good luck

• Partial blackBerry smartphones load black screen

  I need help with my Blackberry 9700.  I noticed that he had a blank screen and was unresponsive, so I pulled the battery with no luck.

  It shows the loading screen (with an initial red LED) for 90% of the way and then goes to a blank screen.

  No lights are on, and no noise alerts are heard (I tried to take a picture to hear the click).

  One thing that I had not noticed before was the double arrow in the upper right, which I think is the icon of send/receive.  When it displays in the top-right corner, it is extremely distorted, and then seems normal shortly after.

  What should I do?  I am away from home for the evening and could not connect to the Desktop Manager.  But is this my only option now?

  Thank you!

  Hi and welcome to the forums!

  I think your best bet for the device OS. Make sure you get a complete backup of your device using the desktop software, before recharging.

  Thank you

  Bifocals

  KB11320 How to perform a clean reload of the BlackBerry Device Software for Windows

• CP5 - W7 - film not loaded - black screen

  Hi all Captivaters,

  For the first time in my life, I have encountered this problem.

  A caprivate priview/publish cannot load its own swf.

  A normal project, among several other projects with the same settings I have all projects cannot load all of a sudden?

  I searched the Forum but did not find any other captivater with the same problem.

  I am ready to send my project to Captivate 'central' supported if they want to study and they are happy for all the advice I can get.

  Here's what I can be if I saw (F12) or post it to an LMS or publish on the desktop or in EXE (media).

  Some settings that I think would be useful to know.

  Setting 1	Setting 2

  Thanks to advanced

  Daniel

  This problem has been resolved and the measures to apply the hotfix is described in the http://blogs.adobe.com/captivate/2010/11/solution-for-cp5-content-not-working-with-the-latest-flash-player-version.html blog post

  Please note that, after you install the hotfix, you must re - publish your projects captivate with text animations. Please let us know the results.

  Thank you
  Vish

• Lenovo black screen randomly Y50-70 times

  Hi everyone I have a very strange problem with my laptop. Here's the Specs (copy-pasted from amazon because I'm lazy):

  Lenovo Y50-70 39.6 cm (15.6 Zoll UHD IPS)
  Intel Core i7-4710HQ, 3.5 GHz
  12 GB OF RAM
  Hybrid SSHD 1 TB (8GB) NVIDIA GeForce GTX 860 M / 4GB

  Since I bought it (about 1 1/2 months of passes) after I installed Windows 8.1 and improved to 10 I sometimes get a black screen, no cursor as has happened repeatedly after upgrading to w10, always helped restart and everything was brilliant.

  The thing is that my screen will not turn off, it's all black, but always on (visible by the light light is always built). It started to happen very rare, perhaps after a week or so, but today I get the problem constantly with different models:

  through normal startup:

  -Start-up of the PC-> black screen

  -Start-up of the PC-> "LENOVO" appears-> black screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> black screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> welcome-> black screen screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> the Welcome screen->-> connection-> black screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> the Welcome screen->-> connection-> after a random time: you guessed it - black screen

  The list is repeated several times today which made me crazy enough then and now, also restart does not power more...

  The same phenomenon occurs during Advanced Start (the small button to the left of the power button), even when I asked for a Startup Recovery. It works well is that during safe mode.

  I tried several things, such as the removal of the Intel graphic card, which gave me access to the normal mode of the system. Here I have updated the BIOS to 3.0.3. Now, I'm testing the Nvidia Driver (relocation etc.). Interestingly, I have observed a disturbing "PnP-screen (standard)" which had a yellow flag next to it in Device Manager, although no second monitor is plugged into the machine. Maybe it's the a boring me severa hours today.

  Also, I am plugged to my TV right now which helps me get at least a photo. During this State, there are also 2 'pnp front (standard)' listed in the Device Manager, none of them with the flag...

  Guys do you know something about this problem, anyone has stumbled across it too much and THE TIPP to save me and my sanity?

  Kay, gentlemen.

  After calling amazon (seller) and Lenovo and "help" from a friend, I decided to return to win8.1. I reinstalled the drivers, settled everything back the way I needed her, saved our day by finding our Starbound universe still exists and! No black screens no more. It seems that this unit has still some problems with the operating system most recent Microsofts then Yes, I'll wait... even though I liked 10... :/

  Cases can be considered resolved and thanks for everything the world where with me on this quest. Cheers on you guys!

• Black screen because of a video driver when the computer loading.

  I tried to change my video driver and now I get a black screen when loading Windows Vista.  How can I regulate the video driver or any other suggestions?

  Hello

  You can access Mode safe? You start the computer, press F8 repeatedly. Cases in this use System
  Restore and/or know last good configuration.

  --------------------------------------------------------------------------------------------------

  No registration necessary data and re - install Windows Vista may be the best option if
  Here are a few more.

  You can save your files by putting the drive in another computer as a 2nd drive (the best) or a
  External drive USB enclosure and then backup to removable media such as CD, DVD,
  or other USB keys. Of course, a real computer store or your system maker can help to recover
  the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS
  -then on the Applications tab - lower right kind - new task - in EXPLORER.exe. Safe mode
  is accessible by tapping F8 as you start several times. CTRL + SHIFT + ESC will also start task
  Manager.

  First check this thread in case it is simple and if not to come back to this thread. http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.
  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the disks
  the manufacturer of your system will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Very slow to load the page Office getting black screen after the homepage at startup?

  On startup, I get a black screen with cursor after the homepage that it hangs for 30 seconds to a minute before the loading of my office and after that everything loads very

  fast? can someone help me with this please.
  Acer laptop 500hdd, mem 4 GB, vista sp2 Home premium 32-bit
  
  
  Gerry

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• (Redirected) USB Flash Drive Boot (BiOS) - black screen/freeze/without end of loading - need help!

  Hello community Dell:

  I have been using your Inspiron desktop for work. Work requires me to a startup USB flash drive every morning to access work files and programs. I just press F12 and select the USB flash drive that brings me then in a workplace Ubuntu after entering my credentials - very easy.

  I recently bought the X 51 office because I wanted the game after work and it was intended to replace the Inspiron.

  X 51 issues (boot BiOS - secure boot off as with the Inspiron):

  UEFI = I get a black screen after the "loading...". ', it freezes the whole system

  Legacy = told me to restart the system and drive and the message repeats little matter what you press

  I tried USB different slots, ending different to access USB - nothing works!

  I tested another theory that would disable the GPU of the X 51, but this proved futile because the problems themselves was replicated. The GPU is the only unique component between two desktop computers. CPU is i3, i5 vs, vs 4g 8g, 1 TB vs. 2 TB, so I do not see these improvements of specification being the culprit. The X 51 has a different unique Alienware BiOS interface.

  The X 51 will be returned to Dell unless someone can some up with a solution - I would be eternally grateful, thank you.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Firefox does not load properly, black screen says tis websit does not provide any identity information

  I can't load firefox, all I get is a black screen do not know how it happened. Can you help me?

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Black screen on the Satellite A350-122 using Linux Ubuntu

  Hi all

  I have a couple of months it has installed Ubuntu 9.04 (which completely replaces Windows XP) on my Toshiba A350-122 and this worked perfectly, until a recent day.

  One day, after having locked the computer, when I came back the screen was very dark and nothing was visible, except with the help of a powerful light behind. Reboot and remove the battery change nothing.

  * This is the case at the beginning of the boot, and even the Toshiba logo is not visible.
  * However, the system starts normally, and I can see in the darkness of my login prompt.
  * I can also select the BIOS Setup, but the screen is too dark.
  * I have no display on an external device.
  * It was not held after an update of the system.

  The first time it happened, I got it repaired.
  The guy has managed to make the display work and then restored Windows XP.
  They said: ' + Linux is responsible for + "... we cannot do anything more!

  I reinstalled Ubuntu, and it happened again the next day... :-(

  * My questions are :*
  # If it is software issue, don't you think it should work in installation mode?
  # Is it possible to reset the display or video card?
  # How can I find out the type of video and the reference (don't forget: my screen is black)?
  # Someone has an idea to advance?

  Thanks for your help

  Martin

  Hello

  I think it's certainly a Linux software problem because the laptop work correctly using Win XP or Vista preinstalled Toshiba I m right?

  The fact is that Linux is not supported by Toshiba:(et vous ne trouverez pas tous les pilotes compatibles sur la page de Toshiba)
  So you have to pick up on some pages of party 3 drivers needed

  On the black screen issue, I think you should check if you're used to that a graphics driver right maybe an update will help.

• Satellite L300 has only a black screen and will not load.

  Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
  See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

  Can someone help

  Thank you
  Tony.

  Hello

  You mean that you are not able to access the BIOS?
  Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

  If nothing will not help to remove the battery and disconnect the portable AC.
  Wait for about 1 hour then reconnect both sides and try to turn on the laptop.