Unable connect 2 cameras for RM-LVR2 AS200VR

Similar Questions

• Is unable to connect/download camera images

  When I used to connect my camera to the PC (USB), I'd get a pop-up: removable disk (f)...  Copy pictures to a folder on my computer using the Microsoft Scanner and camera wizard.  Now, when I log in I just get a local saying: Remobable G disk synchronization.  I even opened G but my photos are not there?

  Hello

  1 did you change on your computer before this problem?

  2. the camera is recognized in Device Manager?

  3 have you tried to reinstall or update the drivers for the camera?

  4. you see a new message of material found when you connect the camera?

  5. is there a specific problem with a Serial Bus Port particular universal?

  You can follow the suggestions and then check.

  Method 1

  Run the fix of the article.

  Hardware devices do not work or are not detected in Windows http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2

  You can also try to power on the machine cycle to drain static electricity that may have built up on the USB ports.

  a. tour of the computer.

  b. unplug all devices of the CPU.

  c. press and hold the button / stop for all 30secs.

  d. connect all devices to the machine.

  e. restart the computer and check if the problem exists.

  Method 3

  Restore the computer to a date and time settings, when it was working fine earlier.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  See also:

  Download pictures from your digital camera

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/download-pictures-from-digital-camera

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  To install a scanner or digital camera

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/scanner_camera_add.mspx?mfr=true

• How to connect a camera endoscope for an ACER aspire one D255E-notebook via a USB port?

  Hello community, I try to be hot to connect a camera small endoscope to an ACER aspire one D255E-notebook, I can not install a CD of the software on this model of laptop. Can I use the DESIGN MANAGER to install an external camera like this?   THANKS in advanced for any & all of your comments.   P.S. this notebook a starter for windows 7

  You'll need to install the drivers somehow.  If they came on a cd, you can copy it to a USB stick and install from there.

• I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  If it's a camera for INTEL it website should have the good

  64-bit to Win 7 64 bit software.

  Some older hardware will not work on newer 64-bit systems.

  check your websites of manufacturers of games for win7 64 bit compatibility.

  Try your game in compatibility mode in Windows 7.

  to say the least there are a huge amount of games and

  software that works fine with Win7 64-bit.

• When you use photo app on Apple Watch, unable to connect the camera to the iPhone, already worked

  Appl Watch IOS 2.0.1

  Apple Watch cannot connect iPhone camera using the Apple Watch camera app

  Hi Satya

  Try restarting your iPhone and your watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.

• AutoPlay does not illuminate when connect you camera

  original title: AutoPlay

  Hello! I have a problem with a camera Fuji Finepix J12 and is that when I connect the camera to the PC via the USB of the PC bleeps port as if he found something being plugged, but no AutoPlay appears and there is no sign of the drive in my computer. If I Plug one of my readers, flash etc. they show all with Autoplay and show in my computer. So annoying because it seems like this device which is the problem, but it worked OK in the past. In the AutoPlay list Finepix J12 watch. Help, please

  After turning on the camera and pressing the button for approx. 1 second reading, that the PC should recognize the camera automatically, Fuji FinePixViewer should start automatically if it is installed and load photos window is displayed, otherwise you can try to uninstall and reinstall the software, please refer to your manual.

  When there are a lot of images stored in the memory card, it takes time to display on the screen of your PC. In addition, it may take some time to import images or you may be unable to save pictures. In this case, use a picture memory card reader.

  I hope I could help

• Satellite A60 - impossible to connect the camera via firewire (IEEE)

  Hello

  Have problems with the dv camera connection to
  laptop computer via cardbus IEEE (firewire)
  It seems to be connected, but none noticed and not take at all.

  I think the problem is with the drivers - but what exactly should I install?

  Thank you

  I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

  Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

  What exactly do you do with your cam?

• the camera for hdr hc3 driver

  Driver for HDR HC3

  The drivers for the USB connection are usually pre-installed on your computer. No driver is required if you connect the camera using an i.LINK connection. you just need a video editing software that will capture video from the camcorder.

  Please note that the USB connection can only be used in the transfer of images stored on a Memory Stick inserted in the camcorder.

  If my post answered your question, please mark it as "accept as a Solution.

• Problem with connect Ethernet camera or vision Builder

  Hello world!

  I have Airlive POE-100CAM. It is possible to connect the camera with NIVB?

  I want to receive the image with this cam and inspect in NEITHER.

  I connect the camera to the other computer from my site, but NEITHER Don t see cam.

  Where is the problem?

  Thanks for your advice and sorry for my bad English.

  Frit

  This device is not compatible with IMAQdx. Camera IP (network security cameras) support is currently limited to mark Axis and Basler cameras.

  Eric

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• a lot of problems to connect my camera to the computer

  Hello. I use a USB cable to connect my camera to my computer. When I plugged the camera, windows said that a new found.and of material after only a few seconds, said that your new hardware is installed and ready to use.but at this time the windows reset without any windows alarm.when start-up and I tried to go to my user account, the computer is locked, and after a few minutes I reset. When windows started again and I tried to go to my user account, he says your files and folder lost and create a temporary account for me. After that when I plug in usb cable to my camera to the computer, it does not work and windows could not recognize my camera. I reconnected as administrator and delete my account and create a new. but the files of my older account which was on drive C are not accessible and that they don't remove it from the computer.  I have already installed microsoft security essential and it is up to date. my windows is XP sp3. Idon't think that my computer to the virus. Please help me .thank you.

  Hello

  I suggest you run restore the system to an earlier date when the camera was working properly.
  Here is an article on the hoe for this: http://support.microsoft.com/kb/306084
  Do you see any other matter with he performance of the computer?

• How can I change the default actions of what made the PC when I connect a camera, USB key, etc.?

  How can I change the default actions of what made the PC when I connect a camera, USB key, etc.. My Samsung intensity II is what I need it for; I want to shoot to the top of this window asking me what to do when I plug in, but one day, I was not thought and press on 'No Action' with the "always perform this action for this device" (or said something like that) checkbox checked.

  Once it is connected, go to my computer, and your camera photo or anything else that should be there.  If is isn't, it is a completely different issue.  It's done, right-click on it and select Properties.  Click the AutoPlay tab.  There is a version of dialogue enough of this "window asking me what to do."  You can figure out what to do from there.

• There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.

  I tried several times to get a solution to this problem.  There is a program running in the background on my computer.  It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.  My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked.  Sometimes my mouse freezes every few seconds until it is maddening.

  original title: hopeless

  It seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:

  You mentioned a background current program, if it helps:

  Perform a clean boot to determine if background programs interfere with your game or program
   http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.

  I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.

  If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have the graphics card Intel integrated, you can check on the website below:

  Update utility graphics card Driver Intel
   http://www.Intel.com/p/en_US/support/detect/graphics

  If you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:

  NVIDIA driver downloads
   http://www.nvidia.com/download/index.aspx?lang=en-us

  AMD (ATI) drivers & Software graphics card
   http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspx

  If you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.

  An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:

  How will I know if my computer has a memory problem?
   http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  How to use the Windows Vista memory diagnostic tool
   http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/

  To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.

  Memtest86
   http://www.Memtest86.com/

  I hope that something of the above can help lead you to a solution.

  Kind regards

• Cannot connect blue ENV3 for Compaq Vista laptop

  In recent weeks, my phone, when plugged into my laptop Compaq with Winows Vista, is recognized as an unknown device. Before a few weeks ago, my cell phone from Verizon enV3 blue connected very well and I have acquired more than 400 songs on the sd card on my phone without many problems at all.  I know this isn't my phone that has the problem because I replaced it a few days ago with a new phone from Verizon enV3 blue cell phone to try to resolve the problem, and it still wouldn't work.  It is also not the cable that I use, which also allows to connect my phone to my adapter to recharge, connect my phone to my laptop because the local Verizon store, the person who helped me was used two of the same type of cell phone chargers and the same message came on my phone , who did on my charger, so I'm pretty sure that's not the cable.

  That leaves my laptop as being the owner of the problem. He is never asked a driver to connect my phone to my laptop until the problem occurred a few weeks ago.  I thought I downloaded two drivers for it to work, but neither helped. So is there something that I'm supposed to do to connect the driver for my phone or what? I desperately want to get more music on my phone! Ask if you need more details and thank you in advance for responding!

  * original title - my phone, when plugged into my laptop, is recognized as an unknown device, so it does not synchronize with windows media player. *

  Hi Jorcar316,

  Please see the link next to the Web from LG site:

  http://us.lge.com/support/download/search/1000000314_EN_SO_.jhtml

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!

  Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!

  I am trying to connect to a machine newly built W7 who has free access to the internet and from the guys in IT is not locked down. But there is clearly something different from my home machine. Both are Windows 7 Ultimate on a home group, not to a domain.

  I use an adapter Bluetooth USB 4 and can sucessfully pair my phone to work, but my application (remote Unified) says "connection refused".

  I tried to disable the firewall and looked at all the parameters that I can find.

  I went through the windows wizards advocatus - all of this without any problem.

  I'm looking to help him find the source of the issue of refusal of connection.

  Hi Gutzy,

  Thanks for posting your query on the Microsoft Community.

  If I understand correctly, you have 2 computers that have all two windows 7 Ultimate installed on them and the two are not on the field. The PC that is at home works well, when you try to connect to your phone by using unified remote right?  You can pair your phone with Bluetooth, 4 USB adapt to the work, but you are unable to take control remotely using Remote unified.

  It shows that it might be the security settings of the computer at work. Would be better to answer this question in the Technet Forums. Please send the query in the link below.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprogeneral&filter=AllTypes&brandIgnore=true&sort=relevancedesc&filter=AllTypes&searchTerm=unable+to+connect+Android+phone+to+Windows+7

  It will be useful. If you encounter problems with windows in the future, please contact us.