Unable to connect to 5G unless always visible

Similar Questions

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• I am unable to connect wirelessly with my new laptop. He always tells me to try to reset the router, but it does not work.

  original title: I'm unable to connect my new laptop...

  I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Error: unable to connect to the server 'Err_connection_refused '.

  Dear friends!

  I use a macbook pro (mid-2012 model year) updated with OS X 10.11.4.

  Recently, I am unable to connect to most of the Web sites in nearly all browsers (firefox, google chrome, safari). I am able to open gmail, sites of apple and google start page.

  Error message in chrome like "Err_connection_refused".

  Error in Safari, as "Safari can't connect to the server.

  I tried to delete the browser cache, cookies and even re-installed browsers. But it helps did ' t.

  I tried to delete the WiFi under preferences and recreated. Still problem persists.

  I am able to display all Web sites in my windows laptop and mobile phones connected to the same WiFi at home.

  Above the problem came recently for 1 week. Please suggest a solution.

  Kind regards

  BALAJI K

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. The files that belong to an instance of VSearch will have the same date of change within about a minute, so they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Search in the folder with the name of all these forms:

  com.something.daemon.plist

  com.something.Helper.plist

  com.something .net - preferences.plist

  Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingelseUpd.plist

  where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

  Here is a typical example of an infection VSearch:

  com.disbalance .net - preferences.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  If you feel confident that you have identified the files above, drag only the files - nothing - to the trash. You may be prompted for administrator login password. Close the Finder window.

  2. open this folder as in step 1:

  /Library/LaunchAgents

  Move to the trash all the files with the name of the form

  com.something.agent.plist

  where something is one of the strings that you found in step 1. There may be not all of these files.

  3. If you have whatever it is moved to the trash in step 1 and step 2, restart the computer and empty the trash.

  Do not remove the folder 'LaunchAgents' or "LaunchDaemons", or anything else inside of one or the other, unless you know you have another type of unwanted software and more VSearch. Records are a normal part of Mac OS X. The terms "agent" and "demon" is a reference to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  4 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  5. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  6. the penalty may have started when you have downloaded and run an application called 'MPlayerX' or "PDF Pronto." If there is an element with a name in the Applications folder, delete it.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.

• I am running Windows 7 Professional. Unable to connect, do not accept the password. Locked out! How to get back IN?

  The last time that I turned my computer off all seemed well.  When I turned it on, once again, I was unable to connect using the same password that I have been using since the user account has been created.  I can't sign with my accout used regularly (with administrative privileges) or my administrator account.  Whenever I try a message appears on the upper left side next to a small red circle with an "X" in the middle that says "Windows Security" white. And right below says "HRESULT 0 x 80074003.»  Why can I not sign? Why won't my password?  Please tell me that there is a solution. I have a lot of important things on my computer that I can't afford to lose.  When I tried to back up my system on an external hard drive, it would not even show up either of the two hard disks on the computer and apparently does not recognize external hard drive 500 GB.  He has always tried to save everything on the internal 'C' drive. Since there is not enough space to back up my system, I get a message saying that there is not enough room and choose a different disk and try again.  I need HELP BAD!

  The last time that I turned my computer off all seemed well.  When I turned it on, once again, I was unable to connect using the same password that I have been using since the user account has been created.

  I have a lot of important things on my computer that I can't afford to lose. I need HELP BAD!

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows to a point when your computer worked well.
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)
  On the documents, you cannot afford to lose: there are three groups of people.

  • The largest group: those who do not back up their important files or save them only once in a blue moon.
  • A small group: those who now save their files frequently because they have suffered a major disaster.
  • The smallest group: those who back up their files regularly because they prefer not to wait for the disaster to happen.

  There is a gradual migration from the first to the second group. The transition can be extremely painful. You can probably save your files this time but next time you may lose the lot unless go out you in the first group.

• 'Unable to connect to the server' msg on Palm Pre to the IMAP e-mail server

  I am trying to connect to a server of Courier IMAP on my Palm Pre. It happens to be a Lotus Domino 7 server, but I don't think that is relevant, unless someone can suggest a better Protocol IMAP (don't want to use POP, because I want access to records). I was able to use it very well on my Palm 750 (Win Mobile) and now for the test, on Outlook Express as a Windows client, so I know that the IMAP server does not work correctly.

  On the Meadow, when I press the "Sign In" button at the bottom of the page of manual configuration of account, I always get the message:

  Error

  Unable to connect to the server

  I am able to sync the Pre with EAS system based on Zimbra to my business and my personal Google gmail account without any problem.

  On the Meadow, in the manual configuration of the account, I entered

  E-mail type: IMAP

  nom_ordinateur.nom_domaine.com

  user name [no @domain.com]

  password

  Port: 143

  Encryption: no

  [And yet once again, I know that the values that I have entered are correct, because I just enter values in Outlook Express and it worked fine.]

  He actually let me same hit "Sign in" until I set up outgoing mail server also (which seems weird and as a minor bug - it should let me retrieve messages, even if I don't have an available SMTP server to send responses). So, I also implemented the mail out with authentication server. I don't know I have a valid for sending SMTP system, but let's assume that is not related to the error, as I just want to do my incoming mail and be able to deposit in the IMAP folders respective, at least for now. I'll worry send later.

  Initially, I left the empty root folder option. I also tried to put a "/" (single, slash, ignore the quotation marks) in there. No effect.

  (Question on semi - the Pre does support multiple connections EE without getting confused? In general (on Win Mobile anyway), you can only have 1 per device. If it was an option on the Meadow, perhaps I could empty Domino in favour of another Exchange Server, but this would be a term much more time here, I hope with my IMAP question).

  Thanks for any help,

  Colin

  It seems that you need a smtp server configuration that is valid for the step of the link set.  In the test here, if the SMTP connection is refused/incorrect login it will not create the account (verified by looking at the packet stream, newspapers of IMAP connection fine, SMTP connection refused, account refused on the Meadow).

  So now, it seems that you need a valid SMTP server in order to create an account.

• Unable to connect to the App Store since the upgrade to IOS 10

  Tried to restart App Store and phone. changed the password and recorded out and back in but still unable to connect. We will, get apps but when I try and download it keeps asking for the password and say that it can not connect. Someone at - it advice?

  Hello CT05,.

  Please ask for assistance with the App Store here in Apple Support communities. I understand how it is important to be able to download my new or existing applications on the App Store. Please try these things to see if we can get this to work for you as expected!

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once you have your backup, please go to appleid.apple.com on your computer or via a web browser. Log in with the Apple ID you are trying to connect to the App Store with. If it connects, take note of the Apple ID and password. Try the same information on the iPhone.

  If this still does not work on the iPhone, please click Settings > Wi - Fi and turn Wi - Fi off. See if you can access the App Store on your cell data. If you can, it means that it some security on the wireless network that you are connected to that is blocking your connection. You won't be able to do this unless you use your cellular data or move you to a new wireless network.

  If you are not able to access the App Store on cellular or wireless data, please open this help article: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. What this does is actually reset some of your default network settings. You have to reenter your password to connect to wireless networks once this is done. Try again.

  Thanks again and have a great rest of your day.

• Suddenly can't get on net with firefox, even after as re - download after progress in Explorer... says 'unable to connect '.

  I have always used Firefox. Today, it was impossible to connect. Restarted my computer AND the modem/router. Another computer on the network CAN focus on Firefox. I can devote himself to explore. When I try Firefox window comes up with "unable to connect...". Firefox can't establish a connection to the server www.bing.com"(or any other URL).

  Problem started after you update Firefox? Your firewall may not recognize the new version of Firefox and won't allow access to the internet.

  • See-> https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• Unable to connect to the Skype server!

  Always write can not connect to the Skype server. just like others. I use version 4.2 without problems, but about 1 week ago can't connect on Skype. Always write this message and try after 2 minutes later. Doesn't work, I try to download the latest version and at the end of installation even message, unable to connect to the Skype server. No problem with our PC

  Interestingly, I can't go to my Skype account with login Skype from my Windows Phone (Nokia Lumia 630).

  Conclusion is any problem with your server and connection PC, dosnt matter version of Skype. Please fix. I hope in a short time. Thank you

  Best regards y):

  

  having exactly the same problem on my Mac when I try to connect it just gives me that a message could not connect to the server. Can go to my ipad, same account etc, but not on the desktop. Anyideas? I tried to download latest version, but that does not help

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• HP Stream: Unable to connect to the HP flow

  Unable to connect to my account or my wife to start scream HP account. It works fine and all of a sudden he says that our passwords are incorrect for us two. We have reset them via the Microsoft Web site, and they always say they are incorrect.

  Hello

  One possibility is that the keyboard layout has been changed, then try to connect using the screen keyboard on as follows.

  The log on screen, click the icon of accessibility in the lower right corner, select on-screen keyboard and enter your password using this.

  Kind regards

  DP - K

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• Satellite Pro C50 "unable to connect" when linking to Netgear WiFi

  WiFi error - could not connect to this network WNAP210 Netgear router.

  Hello

  I have a problem with my computer laptop connection with my router Wifi Netgear router WNAP210 model, when I type the password it says that it is unable to connect or sometimes that the password is incorrect!

  I contacted Netgear, and they suggested changing the name of the router to remove any trait symbols "_" underscore, I made it today but always this annoying message on the cell phone. It does the same thing on my Nokia Lumia 1320!

  I tried deleting found connections and starting from scratch and also changed the name of the router (which displays correctly when you scan for Wifi on the C50).

  Now it starts to get really wound up... Please please help?

  Thank you
  Adam.

  Hello

  You should check the configuration of the WLan router.
  First, you will need to use the same standard WLan (802.11 A/B/G/N) for the wireless network, as well as for the Wlan router.
  In the device-> Waln Manager map properties-> Advanced tab, you can choose the standard Wlan to Wlan card.
  You should also check the settings (WPA/WPA2 AES, TKIP) encryption. Not all standards are supported by each Wlan adapter! So please pay attention to this fact.

  Last but not least, you should also check if these connection problems using various channels (1-11)