Unable to connect to a single window service!

Similar Questions

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• Unable to connect to the VMware web service: invalid key file

  Hello

  We have a CPO 2.3.1 who refuses to connect to vCenter (see newspaper excerpt at the end of the post).

  Recently, we changed our server vCenter (part of a 5.1 update).

  We tried the following workarounds:

  • Remove and add all the elements of the platform from the portal using services SE
  • Re import automation packs (4 of the Starter Edition v2.3.1.38)
  • Re on the keystore password

  No change at all...

  Do you have an idea on how to fix this?

  Thank you.

  Kind regards

  Stone

  || 235. 02/10/2012 15:46:21.667 | 6072. WCF: http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord ' gravity 'Error' = >http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxhandling of an exception. . Tidal.Automation.Server.exe Tidal.Scheduler.Common.Communications.CommunicationException, Tidal.Scheduler.Common, Version = 2.3.0.0, Culture = neutral, PublicKeyToken = fba593b23cf207cdthe connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: Invalid keystore. to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)Tidal.Scheduler.Common.Communications.CommunicationException: the connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  || 236. 02/10/2012 15:46:21.667 | 6072. An exception that is not of type rhapsodyexception has been captured while a webmethod call was made.  This exception has been intercepted and generic.

  || 231: 02/10/2012 15:46:21.667 | 6072. EXCEPTION (Tidal.Scheduler.Common.Communications.CommunicationException): The connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  Stack trace: at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. <> c__DisplayClass1c. b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object, Object [], Object [] entries & exits instance)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  You have an invalid key file because the HTTPS certification has changed. You must remove the old keystore file and restart the OPC Server and then reconnect / run something against vCenter.

  It is also possible to host Adatper framework/java problems I've seen often.

  If you need more information, you will need to prosecute TAC with your service contract please. Normally, we try to solve no newspapers on the forums.

  -Shaun Roberts

  CIAC/CPO support team leader

  [email protected] / * /.

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Unable to connect to Essbase on Regional service Console server because of error 1042006

  Hello
  
  I installed the whole EPM 11.1.1.3 on Windows x 64 platform. When I try to connect the server essbase through the Regional service console, I get the following error:
  
  Essbase Server: localhost com.essbase.eas.essbase.defs.ServerCommands.Connect December 28, 2010 17:39:08 IST
  Error: 1042006: error network [10061]: unable to connect to [localhost:1423].
  The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol.
  Check your network connections.
  Also, make sure that the values for server and port are correct
  
  I checked the CFG file, which shows the correct port as well. I can connect to the Administration of Essbase server located on the same machine, but do not know why I get this error message. Below I have pasted the contents of the CFG file, in case where someone wants to cross check it out.
  
  
  CFG File indicates the following:
  
  ; The following entry specifies the full path to the JVM. DLL
  ; JvmModuleLocation D:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
  BPM_Oracle_DriverDescriptor "MERANT 5.2 OEM 32-BIT Oracle Wire Protocol.
  BPM_DB2_DriverDescriptor "MERANT DB2 Wire Protocol BITS 32 5.2 OEM"
  BPM_SQLServer_DriverDescriptor "MERANT 5.2 OEM 32-BIT SQL Server Wire Protocol.
  BPM_SQLServer_DriverDescriptor "SQL Server."
  ; BPM_Netezza_DriverDescriptor "NetezzaSQL".
  BPM_Teradata_DriverDescriptor "Teradata.
  BPM_ORACLEBI_DriverDescriptor 'Oracle BI Server'
  ; AuthenticationModule CSS
  ; AGENTPORT 1423
  ; SERVERPORTBEGIN 32768
  ; SERVERPORTEND 33768
  ; AGENTDESC hypservice_1
  AGENTPORT 1424
  SERVERPORTBEGIN 32768
  SERVERPORTEND 33768
  AGENTDESC hypservice_1
  
  
  Ideas that would be really useful.
  
  Thank you
  AJ

  There is a clue in the error message and the CFG file you posted.

  The error message:
  ...
  Unable to connect to [localhost:1423].
  ...

  CFG file indicates:

  ...
  ; AGENTPORT 1423
  ...
  AGENTPORT 1424
  ...

  The port default (1423) is commented out and changed in 1424. Your EAS connection must use port 1424 and not default to 1423.

  Try to use "localhost:1424" (without the quotes) in the Essbase server field when you add the Essbase server to EAS.

  Published by: Robert Armstrong on December 29, 2010 13:25 - typo

• Unable to connect to Skype in Windows 8.

  Original title: Skype using the problem

  Sir when I connect my Skype account... After a few seconds, it shows that... hase of Windows has stopped working this application... and I am unable to use Skypeon windows 8...

  Hi Usmannaseer,

  Welcome to the Microsoft Community Forums and thank you for sharing your request here.

  I see that you have some problems with the connection to Skype in Windows 8.

  Let us work together to solve this problem.

  Please answer these questions so that we can better understand the issue.

  1. what is the exact error message that you receive?

  2 who represent do you use to sign in to Skype?

  3 this problem occurs with a Skype account?

  4 the issue manifests in another computer with Windows 8?

  Please get back to us with the results.

  Please follow these steps to change the name of the Skype folder.

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type %APPDATA%\microsoft\windows\sendto and press enter.

  c. in the new window, look for a folder called Skype.

  d. rename it to Skype_old.

  e. restart Skype.

  Note: You will need your password to re - open a session and re - set all the default options.

  If the problem persists, please post this question on the Forums of Skype community.
  http://community.Skype.com/

  Please get back to us with the results.

  If you have any other questions about the Windows operating system, help us on this forum. We are happy to help you.

• Unable to connect to Fileshare on Windows Server 2008

  I'm in a business with Windows 2003 Domaincontrollers network.

  We have a Windows 2008 servers and Clients Windows XP view. Normally I can correspond with these sahres but sometimes it starts to hang. That it is not possible to connect from any Client Windows XP for these actions. Windows 7 not affected.

  Could someone help me please?

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.
  http://social.technet.Microsoft.com/forums/en/windowsserver2008r2networking/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Job-Run: SELFUPDATE, unable to connect to the ConsoleJobStepExecutorService Web service working system.

  Job system failed to connect to the ConsoleJobStepExecutorService Web service. Check the OMS's WebLogic Admin Server for any issues related to Web services configuration that could cause a connection failure.

  Natural logarithm of output

  Hello world.

  I am writing from Hungary, sorry for my bad English. You can read my problem above.

  I'm looking for:

  -Oracle Cloud control 12 c version 5

  -Extensibility / auto update / check updates

  -activity of employment-

  SELFUPDATE_20151111104414

  1 race

  11 November 2015 10:44:14 GMT + 01:00

  SYSMAN

  Refresh updates

  but the message: error log:

  Job system failed to connect to the ConsoleJobStepExecutorService Web service. Check the OMS's WebLogic Admin Server for any issues related to Web services configuration that could cause a connection failure.

  and nothing happened.

  
  

  I would like to download and install the microsoft agent x 64 driver.

  
  

  -I can't find anything on the the red message in the internet or in the google...

  -I'm still a beginner in Oracle...

  -MOS, proxy and the credentials are OK.

  
  

  Please help me,

  Thank you for your co-operation in advance

  László
  

  Hi Courtney lamas-Oracle

  First of all. Thank you very much for your help!

  Yesterday, I was able to find the answer to my problem:

  So:

  1. I used consol secure with sleeve and key_strength 2048 (because there were problems connecting my Chrome, IE11 or Firefox to the Weblogic administration Console and the https certificate)

  2. I refreshed DemoIDentity, jks with certificate of keystrength from 512 to 1024 due to the blocking of the browser.

  The solution:

  sure emctl console - portfolio -key_strength 1024

  Restart the WHO

  I've been careless.

  Everything works fine now.

  LACI

• Unable to connect to the VMware Research Service - the SSL certificate verification failed

  Hello world

  to implement the new vCSA 5.1 but I get an error when you try to connect via browser Web Client.

  "Impossible to connect to the VMware Research Service . https://xxx.xxx.xxx.xxx:7444/lookupservice/sdk - The SSL certificate check failed. »

  I've found this KB

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2033338 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 423540040 & StateID = 1% 200% 20423538503

  The manual/work around seems to be a lot of work for me and perhaps this will cause other problems in the service due to problems of certification :/

  I also think that this cannot be the solution for a whole new vCSAppliance...-_-

  I am also able to go to https://xxx.xxx.xxx.xxx:9443 / admin-app

  is it correct for the device?

  You need to regenerate the certificate for Server Appliance after change of IP/hostname.

  Visit this link: http://www.virtual-blog.com/2012/09/failed-to-connect-to-vmware-lookup-service/

  Also, the admin/management interface is https://: 5480

  Lack of credentials [root/vmware]

  HTH

• Unable to connect to the network - Windows 7 on Windows Server 2003

  original title: Six Windows 7 computers running on a network (Server Windows 2003 R2 Standard Ed) would not connect to the network in the morning, startup repair is unable to repair

  We have 10 PC running Windows 7 on a network (Server Windows 2003 R2 Standard Ed) and 6 of them started up the Start Up Repair screen the same morning. Run startup repair but then received the message "Startup Repair cannot repair.

  Windows could not start. A recent change in hardware or software may be the cause. Startup Repair cannot repair.

  Details of the problem: event name offline Startup Repair

  Signature 01 6.1.76.00.16385

  02 6.1.76.00.16385

  unknown 03

  04 21200896

  AutoFailover 05

  2 06

  07 0x6b

  OS version 6.17600.2.0.0.256.1

  Locale 1033 ID

  In the details to diagnose & repair was the only entry that indicates a problem

  First cause is parameters 6 unknown error checking b 0 x 0, 0x0, 0x0, 0x0

  In all cases the system restore worked but had to come back a week, him the day before restore point would not work.  In one case, the problem is that system restore and the next day does not, eventually reinstall.

  Clues or tips as to what has caused this?

  Kind regards

  GinSeek

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Above links are for server communities.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect Bluetooth speakers with Windows 7 system

  Dear experts,

  I have a laptop HP Pavilion DV7-2014TX running Win7 Ultimate.

  I just bought a new Bose Bluetooth headset. I tried for 2 hours to try to pair it with my phone, but my laptop is not all bluetooth devices.  I tried as much as I know, but I'm out of ideas. The only thing that I think now is that my laptop is old enough that it is no longer compatible with the version of bluetooth on my helmet.

  Any help would be welcome, thank you.

  George

  Original title: Bluetooth

  Hi George,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use headsets Bluetooth of Bose enabled on Windows 7, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You are able to connect and use another Bluetooth device on this computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  The question may arise due to the incompatibility with the Bose headphones Bluetooth driver. Then I suggest that you try the following steps Diagnostics to find out the root cause, apply patches, and check if the problem persists:

  Method 1:

  Try to follow the steps in the following link to resolve the problems with Bluetooth devices:

  The problems with Bluetooth devices

  (Note: article also applies to Windows 7)

  Method 2:

  If method 1 does not work, try to run the patch that is available in the following link and look for the question.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  Method 3:

  Alternatively, you can try to check if the Bluetooth support service is running.

  1. Click Start, type services.msc in the Start Search and press ENTER.
  2. In the list of services, double-click the Bluetooth Support Service.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click on apply and then click OK.

  Trying to connect Bluetooth speakers with the computer and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Unable to connect mobile to Satellite P300: service failure detection

  II manage with the Bluetooth feature on my C905 mobile.
  It is connected to my bluetooth hands free in my car without problem, but it does not connect to my laptop toshiba satellite P300.

  The laptop computer and the mobile phone will locate each other, but when I try to authenticate I have a "service outage detection" warning every time. my old phone connected without issue to my laptop, and I put all the phone settings according to the user's guide.

  Any suggestion would be appreciated.

  I read another post here that says to change ports... but I have no idea how to do

  instructions step by step would be great, if possible

  Thank you

  Kane.

  Hello Kane

  Have you installed latest Toshiba BT stack?
  I have the same model of laptop and I tested with my new LG BL40 newchocolate.
  It works perfectly. The war of any configuration made in only 2 minutes.