Unable to connect to wireless on my laptop

Similar Questions

• Unable to connect a wireless printer with laptop computer since the reset wireless router

  I have a wireless HP C4580 printer that connects to my Acer Aspire laptop using windows 7. The two have worked together very well for months.  My wireless router stopped working a few days ago, so I had to unplug the device to make it work again is it.  But since then, I can't get my lap top to communicate with the printer now.
  I went all the problem of shooting and insured the printer is on line and set it as default printer. I even did a system restore, as suggested in the troubleshooting
  With the help of the program are the two messages that I get now troubleshooting
  1 that the C4500 series can be contacted via the network (this is the message that I had before the restoration also)
  2 the C4500 series is not shared with the homegroup

  All the tips are greatly appreciated in progressive simple language as possible as I am a bit useless with computers

  I assume that the printer is all first directly connected on the router, then the laptop?  Access the router and make sure that the printer is listed as a "wireless client" connection  If this isn't the case, you should probably restore the wireless "link" between the printer and the router then the printer should work.

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• Unable to connect my wireless laptop

  Unable to connect my HP laptop to my connection Wireless netgear which is attached to my desktop Dell computer. Worked previously, but have not turned on my laptop for about 2 months or so.

  Hello Granyd,

  ؠ What happens when you try to connect to the wireless network?

  ؠ think that your wireless network in the list of networks available in the Notification area?

  ؠ you get an error when you try to connect to the wireless network?

  You can read the article that will give you information on how to connect to a wireless network:

  http://support.Microsoft.com/kb/928429

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to wireless networks

  I was unable to connect to my wireless network. My network connection on my laptop is enabled and under properties, it says that it's maintenance correctly. However, under the command prompt it says that my ethernet adapter network connection is disconnected. I've alerted to check my connection because my wireless network list went from about 10 ads to 1. 1 on the list is a network installation of HP. I had not seen it. Any suggestions or tips to solve this problem?

  better to go to your vendor manufacturer's site and download the driver from there, if possible, otherwise will do you the needfull Sohail who was Khan network hardware professional VOTE A S HELP FULL IF this REALLY ŒUVRES HELP the OTHER FIND ANSWER FASTER

• Notebook Compaq CQ60 - unable to connect to wireless broadband services

  Hello
  
  I'm going up the walls of the last week, have spent days trying to solve the below problem.

  Basically just moved house and my cell phone girlfriends got wide Eircom broadband installed, connected automatically, so that my Compaq Presario CQ60 Notebook Windows Vista will not connect.
  
  I checked if many different forums are trying to solve this problem, but without result im afraid... it seems that there is an excellent internet connection... but can not get on the internet because it says 'local access network unidentified only.

  The router I have is "atheros AR5007 802. ' 11 b / g WiFi adapter ", and the o/s I have on my laptop Windows Vista 32 bit.

  In our previous residence we had UPC broadband, and I had no problems at all.

  I have very little knowledge of computers, so appreciate your kind patience in advance
  
  Would be very grateful if someone may be able to help out me here!
  
  Thank you very much!

  Hello:

  Install this driver and you should be fine.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  The wireless in your laptop card is notorious for not being able to connect to the internet with the latest routers.

  Paul

• Unable to connect to wireless internet, also infected by the Virus on the computer.

  Original title: got a "Guid_MFE_CONNECT_CALLOUT_V4" problem using windows vista OS

  Hello:

  Unable to connect to the internet.  Using a wireless adapter on this computer.  Tried, connect directly to the router with cables.  Had a virus that affected anti -.

  anti-virus software.  Uninstaller for Windows did not remove all antivirus software.  Computer won't let not the admin deletes the folders on drive "C" where are the files of Kaspersky Anti-virus.

  Any help out there.

  Ty

  Hello

  You can try to boot to the desktop in Safe Mode with networking and check if the problem could be solved.

  Follow the link for starting office in Mode safe mode with networking Option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

• Unable to connect via wireless

  Hello

  I use a HP Pro book Windows7 professional. All systems were functioning well when the wireless connection has been disconnected.
  Later my laptop cannot connect via wireless even if system the wireless still work correctly on my ipad.
  Please tell us what I should try to fix this problem.

  You have run the wireless troubleshooting tool? - http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Is your wireless network of the specified interface as active or disabled, if disabled then re-enable-control panel, network and sharing Center, change the settings of the map, right click on your device to turn on or off (you will be asked for admin at some point).

  PS - extra thought, some laptops have a wireless switch network. It is not struck off there?

• Unable to connect to wireless internet after Windows Vista update on 16/09/10

  Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

  If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

  I also tried to fix it by other solutions on this forum, that is

  • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

  The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

  Please could shed you some light on this case for me?

  Thank you very much

  Hello

  I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

  A big thank you to everyone who offered advice.

• After running Thinkvantage System Update, unable to connect the wireless access point

  I've recently performed Thinkvantage System update for updating various programs/drivers on my T61p.  I've updated the V5.12 access connections.  In addition to this I was required to update driver V1.52 power management and functionality of the shortcut key for

  V2.10.0002 (two of them were the most recent available).

  After these updates, I can connect is no longer to any access point wireless that worked before this update.  I have tried to reinstall earlier versions of Access Connections, but still couldn't connect to wireless access points.

  ANY help would be appreciated.

  OK, problem solved.  I found that when I ran last weekend system update downloaded and installed an incorrect driver for my wireless hardware.  I installed the correct driver and now the connection to a wireless access point works.

  Certainly, I don't understand how/why not update system would be to download and install an incorrect driver.  VERY FRUSTRANT and TEDIOUS!

• Unable to connect any wireless for printer HP Photosmart 5520 laptop

  I've been troubleshooting for hours, but I can't connect wirelessly to my computer to my new HP Photosmart 5520.

  All are connected with excellent resistance to the home network, but none of the laptops will complete the HP printer installation process.

  One is a Windows 7 Dell and the other is a Macbook Air with Mac OS10.  The Mac will recognize the printer when I go to add the printer in preferences, but it cannot print to the printer.  He repeats to me there are problems connecting with the printer.  No computer cannot find the printer using the HP device connection software.

  I was able to print using the email address of the printer from my iPhone with HP ePrint, but otherwise I can't.

  Help, please!

  Hi Spencer,

  Thanks for the advice, but it is not really relevant, there is no wifi comm errors.  My wireless access point is not part of the router and the network wifi, as well as my home ethernet network is inside the firewall.  The printer receives an IP address very well, I have a reserved for her on my dhcp server address (same as I do for my sky box, tv etc.). It works fine for everything except customers also wifi. So direct print jobs internet, wifi works from iDevices, printing from a working client wired network, but a client who, also on wifi, falls down. It is a single subnet lan with some addresses reserved and others from a pool.  I made a little chart - the DHCP server is actually in the firewall, which is a computer card. In this case, the laptop also has a reseved for lan and wifi addresses. I have disabled the firewall windows on the home network.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect through wireless F4580: "unable to retrieve the IP.

  Hello

  I live in France, where the F4580 and trying to connect wireless.  The printer works fine when connected via USB, but I can't make it work wireless, HP installation wizard gives me:

  IP address: impossible to retrieve the IP

  Subnet mask: Impossible to retrieve the IP

  Default gateway: failed to retrieve the IP

  Preferred DNS server: unable to retrieve the IP

  Auxiliary DNS server: unable to retrieve the IP

  I use a MacBook Pro with Snow Leopard on an ISP Internet Orange Livebox. I saw some issues autour, but none exactly what I have with the same configuration.

  Filtering of Mac addresses: a possibility, but other laptops are able to connect to this wireless with key security without problem. similar here: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Wireless-set-up-HP-F4580-vs-Orange-Live... but also seems to be PC

  Orange Livebox problem: question mentioned here: http://livebox.tomhallam.co.uk/tutorials/how-to-install-a-printer-to-your-livebox-liveprinter.html but that seems to be for a PC

  Question in Snow Leopard: is not compatible software for SL? I see this: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/C4780-Snow-Leopard-Airport/m-p/174198/h... but that's a different printer model

  Issues related to the:

  How to find the IP address of my printer?

  How to find the MAC address of my printer?

  How can I print my network Config page?

  Of the ideas there?  Any help is very appreciated.

  Many routers-wireless Orange Livebox require that press you a button to add a new device to the network.  The button is probably located at the back of the router.

  I think we should start over.  Try the installation process of the printer F4580 using the driver from www.hp.com located here.  Once it scans and detects the printer, press the Connect button on the back of the Livebox wireless router.

• Satellite Pro L40 PSL43E: Unable to connect to wireless local area network

  Hello to everyone who reads,

  I've had this laptop for about 12 months and a few days ago while trying to connect to the internet, she advised that I was not connected to my router.

  I have another laptop, it connects well with wireless and it connects fine using the ethernet cable but wireless!
  Especially, when I switch the radio power on/off using the small switch on the front the same symbol rises (the cell phone, red circle with a red slash through it, then the sign of the internet!)

  I tried the update of the driver for the Atheros AR5007EG Wireless Network wireless adapt and not much happened!

  I'm not in portable computers in a big way so any advise given better would become simple?
  I saw some stuff about the removal of the cards and other things? but I don't know where to start!

  Is it a common thing with these laptops?
  Need help please, I desperately need my laptop wireless.

  Thanks a lot to all in advance

  Paul

  Hello Paul

  Make sure that the wireless network adapter is correctly enabled.
  After putting using WLAN switch using FN + F8 key combination and make sure the wireless network adapter is enabled.