Unable to install Windows XP on a Nettop Foxconn... Help, please

Buy Foxconn Nettop (nT - 1000 series i) with 60 Gig Solid State Drive computer.  Have also again Windows XP SP2 install disk (old but never used and clean).  Need to run applications that only run on XP.  Unfortunately, XP disk is not being seen.  Could load Linux but need to XP.



1. is the Windows XP disc retail or OEM?

If you bought the disc for sale retail Windows XP from Microsoft, contact the Microsoft Supplemental Parts team.


If you have the Windows XP through the computer manufacturer, contact the manufacturer of respective computers for Windows XP disc.

Tags: Windows

Similar Questions

  • I'm unable to install Windows XP service pack 3

    Original title: Windows Service Pack 3

    My computer is running Windows XP 2002 and Service Pack 3 to Windows wont install after many tent. No explanation is given other that the update failed. My firewall is disabled. Any suggestions?


    I suggest you to go through the articles to know more about the installation of the service pack Windows Xp.

    Learn how to install Windows XP Service Pack 3 (SP3)


    Steps to take before you install Windows XP Service Pack 3


    I suggest you follow the steps in the article and then check if OU are able to install Service pack 3.

    How to troubleshoot an installation fails on Windows XP Service Pack 3


    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Get back to us with the results.

  • Unable to install Windows Live Messenger in Windows XP machine.

    Original title: need help installation.

    I try to install Windows Live Messanger but get the following error: C\Documents and owner Settings\Temporary Internet Files\Content.IE5\XW5ZYEMU\wlsetup-web[1].exe is not a valid Win32 application. I am running Windows XP. I have no idea where to go from here, so if someone could help I would appreciate it really :)

    Thank you


    Hi Stephanie,

    You are able to correctly install the other applications?

    If you have a problem with Windows Live Messenger, I suggest you to ask your question in the Windows Live Solution Center for assistance.

    Portal Messenger

    Hope the helps of information.

  • Error: ' Service Pack has not been installed. Restoration of the changes. Not turn off not computer. "unable to install Windows Service Pack 2."

    Original title: cannot install Windows Service Pack 2.

    I tried to install Windows Service Pack 2 and you know how when you lock your laptop, it's how he like to appear. Service pack filed to install, so now have him, he said, 'Service Pack was not installed. Restoration of the changes. Do not turn off computer. "I'm not going to let me at all to connect to my computer... Alls for this is restarts by itself and when it turns on, it says the same thing. I already tried to remove the battery and leaving out the laptop for a little while and then when I put the battery in and re - turn on the laptop, it says the same thing and continues to do exactly the same thing and I'm getting really aggravated and crazy. Is there anyway that I can fix it without going through a computer technician?


    Have you been able to successfully install the other updates?

    If you have the Windows Vista installation disc, follow this link and check if the problem persists:

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    See: How to troubleshoot Windows Vista and Windows Server 2008 service pack installation problems?

    Learn how to install Windows Vista Service Pack 2

    Hope the helps of information.

  • Unable to install Windows Vista, the system freezes at copying files and the extension of the files

    Original title: Setup error

    So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing


    ·        What are your system specs?

    ·        How you try to install windows vista on the system? After the start of the desktop?

    ·        What is the exact error message that you experience when the system hangs during the installation?

    I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

    This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

    Installation and reinstallingWindows Vista


    I suggest you to check the below link.


    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I couldn't install windows live due to unknown error0x80070641.help staring

    I couldn't install windows live because unknown error0x80070641.help me fix.my pc is windows 7 32-bit os

    Try to use the installer in offline mode:

    Download Windows Essentials 2012 (Offline Installer)

  • My Windows XP is unable to send emails, as it did before. Help, please.

    I'm online on Windows XP.  I have my email address * address email is removed from the privacy *, where I always sent and received emails.

    I received my emails this time, but my computer does not send my email responses when I click 'send '.  Help, please.

    I see. I've never used Hotmail and all 'Live' programs have their own set of forums here.

    Windows Live Solution Center

    Specific Hotmail forum is:

    Windows Live Solution Center Hotmail Forum

    I would be helpful if I could, but I don't have a clue when it comes to Hotmail.

  • Printer is no longer detected after installed new router. Tried everything. Help, please!

    I have a Photosmart 2575 printer which has worked well for several years.  It has a wired connection to my router.

    Recently, I installed a new router (sky fiber hub) and now the HP software (and any other software printer/scanner) are unable to detect the printer on my network.  It's strange, because my desktop (wired network connection) and my laptop (wireless network connection) can see the printer and I can install it using the standard features of windows 7.  I can also browse the built-in web server, so I know for sure that my printer is on my network and accessible.

    But despite numerous attempts to make the software HP Solution Center to work I am unable to print/scanning etc from this software.  I tried several different 'fixes' including full level 4 uninstall before reinstalling the software, reset the network settings on the printer, the printer remove everything on the network etc etc but nothing worked.

    I tried to use the printing software HP and doctor Scan, but this does not help.

    I'm totally perplexed by this apparent lack of connectivity.

    Can anyone help, please PLEASE!

    Alan Phillips

    Success in the end, but only after many hours of trawling through forums of HP and Microsoft, and many attempts to make the connection!

    But here's a summary of what I did for someone else with this question: -.

    1. I carefully removed all traces of what to do with my PC HP and unplugged the router of network printer.

    This requires many "level 4" uninstall to clear all installed previous falied and delete everything in the temporary file later: -.

    1. press the Windows key and the letter R
    2. tap folder
    3. press enter or click OK
    4. open the file 7z
    5 open the util folder
    6 open the folder of the ccc
    7. double-click on the Uninstall_L4

    2 using the control Panel_Programs and features, uninstall anything left that could be associated with HP

    3. perform a disk cleanup using Start_Accessories_System Tools_Disk cleaning and repeat this for system files

    4 Follwing the procedure found on the following link to check that the print queue is working, and that all the dependencies are "launched": -.

    Link to the message

    In this thread, there is a sequel of the procedure which requires opening a command prompt in administrator mode and enters the command line carefully

    dependent on the spooler of sc config = RPCSS
    (Note the space after the = not before)

    5 run msconfig.exe on the tab general, click on "selective startup", uncheck "Load Startup items", then on the services tab, hide all microsoft services and unselect all items [remember then to revive and return to a normal startup!]

    6. restart the PC

    7 disable Firewall [remember to activate later]

    8. start Internet Explorer (I had previously used Chrome)

    9 download AIO software from the HP Web site

    10. run and connect to the printer when you are asked (make a note of the IP address of the printer)

    11. the network printer was not found immediately, to do this, click Advanced and enter the IP address of the printer

    12 success - the printer was eventually detected and installed correctly.

  • Downgrade from Windows 7 to Windows Vista Home Premium... help please!

    Hello. I'm helping a friend fix his computer. He had someone to download a pirated version of Windows 7 and I am trying to downgrade it to its old Windows Vista. I followed all the instructions on this page http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/downgrade-from-windows-7-to-vista/e95a2e68-34b1-487e-aa56-3dadfea59a8b?tm=1357534800060 to restore the boot sector. When I type in c: D:\boot\bootsect/nt60 everything happens is subsystem needed to support the type of image is not taken in charge. I didn't know how to undo the changes that I had done so far, so I just restarted the computer and hope for the best. Now it is loading Windows Vista Home Premium but I'm unable to open a session the user account... "The service user profile Service has no logon. Message unable to load the user profile "and I'm unable to open a session. Please help me!

    Download a Windows Vista image and use the instructions in the article Create a. ISO file and then burn it to a blank DVD:

    Windows Vista SP1:

    ImgBurn - supporting the creation of CD more. ISO files,
    It supports a wide range of image file formats, and it's free.


    Note: Use always slower burning (4 x or 2 x) speed is offered a choice.


    Boot from the Windows Vista DVD

    To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:


    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows Vista click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.


  • Refomatted my computer laptop and reinstalled windows, something does not work now help please

    so, I recently wiped my drive hard clean for a fresh start, installed windows 7 but now some of the features that use to work no longer work. For instances when I press F1 and F2 buttons my brightness will not upwards or downwards, I can't lock the touchpad more then now the cursour jumps around. I just want to know if there is something I could do to get back to the way it was. My laptop is a Presario CQ56 and help would be apreciated thanks in advance.


    First of all, download and install the software graphics from AMD on the following link.


    When this has completed, restart the laptop.

    When windows has reloaded, download and install the HP Quick Launch software on the link below.


    Once the installation is complete, download and install the Synaptics driver on the following link.


    When the installation has completed, restart the laptop.

    Kind regards

    DP - K

  • Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

    After the updates of this week, the system will not load anything.

    Hi Juliet,

    Thanks for asking the question in the Microsoft Community forum.

    From your description, I understand that after Windows Update, you can not load Windows.

    To better understand the question, please answer the following questions:

    1. What is the version of the Windows operating system that is installed on your computer?

    Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

    2. what happens when you try to load the system? You receive an error message?

    3. what application or anti-virus security suite is installed on your computer?

    4. you remember after installation of update, you are facing this problem?

    Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

    If you are using Windows 7 and Windows Vista, follow the mentioned methods:

    Method 1:


    If the computer does not start in safe mode, perform the last known good Configuration.

    Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

    Note: Link above also applies to Windows Vista.

    Question remains always use same method 2.


    Method 2:


    Try to perform the Startup Repair and check.


    If you are using Windows XP, follow the mentioned methods:

    Method 1:

    Perform the last known good configuration.


    Method 2:

    How to fix a computer that does not start


    Hope the above information is useful, if you have any question back to us, we are happy to help you.

    Thank you.

  • I have 2 problems-how can I activate my Add ons and how to uninstall Windows Anti Virus. I need help, please.

    I have Windows XP 32-bit with IE8 Add ons.  I mainly use Firefox Mozilla for my browser and Yahoo as my home page.  Anyway, I have tried all the support and help guide and technicians told me to do to get add ons to open and activate but in vain.  This computer was given to me as a profession, and it was used in a Bank, so I think that the system administrator has disabled the add ons.  I myself as an administrator and use the tips and tricks given windows and Microsoft, but I always run up a wall.  I need help, please.
    I also need to know how to uninstall Windows antivirus software.  I can't find anywhere on my computer.  I feel really stupid and he is probably right in front of my face, but I can't find it to uninstall.  I have McAfee that I paid dearly for if I want to use it until it expires.

    This "Microsoft antivirus' witness (AKA Trojan W32/FakeAlert) hijackware infection!

    If you manage to somehow move to Win7, you will always have an infected computer.

    The ONLY way to solve the problem is by formatting the current hard drive and do a clean installation of Windows, whether it is WinXP or Win7.

    The ONLY way you can do a clean install of Windows XP if you have disks that came with the computer or if by chance, there is a hidden partition restore (not to be confused with the system restore).

    If your kids er - well & their spouses are going to spend money on a new HARD drive, they'be be better spend on a low-end Windows 7 computer and brand-new (for example, a netbook or a mini).

    NB: Any data on your Windows XP computer must be considered 100% reliable! (This includes all of your usernames and passwords, for example, those used for online banking, etc.) You do NOT want to put ALL the data from Windows XP to a new computer or HARD disk.

    Good luck, Grandma. Hope that your grandchildren will treat you better than their parents.

    PS: Time wounds all heels.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • _ "Windows Explorer has stopped working" error - HELP Please! __

    I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

    Thank you, Bryan


    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).


    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista


    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    How to troubleshoot performance issues in Windows Vista

    Optimize the performance of Microsoft Windows Vista
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.

    There are many excellent free tools from Sysinternals

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.

    There are many excellent free tools to NirSoft

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.

    Many excellent free tools and an excellent newsletter at Karenware


    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    How to install a device driver in Vista Device Manager

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx


    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method

    Problems with the overall speed of the system and performance

    Performance and Maintenance Tips

    Explorer Windows stopped working

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • No access to Windows Vista Home Premium more - need help please!


    I made the most stupidest mistake by not creating a password reset disk.  I have one account administrator, and this is my account, I use as well.  I am currently logged in as "guest".  I tried to create a password reset disk from another computer with Vista Home Premium and tried to reset my password, but can not, as happens with an error.  Now, I know that there must be a way to get new.  I have an idea of what is my password, but I could have made a typo when I re-printing and since disconnecting and tried to reconnect to test, it didn't.  Lycky for me, I have activated the Geust account for a friend to use.  So now I'm stuck.  I need to reconnect, so I'm desperate, and re - install Windows is not an option either.  Pretty anyone can help me please.  I tried all combinations and tried to make deliberate typos to see if I can get the correct password, but not to go at all.  And the geust account limit me to access what it is, I can't install of the software, it asks me my administrator password.  Is there another way around it.  Please please help.  If there is anything I can do in Windows, there's a few other kindof thing I can do at least.  All that will be a great help.

    Thanks in advance.

    Ryan McR

    Ryan McRayne

    Please read the following article support on Microsoft's strategy concerning lost or forgotten passwords


    The only step that we recommend that you take in this scenario is either restore your computer to an earlier point, or to do a clean install of the Vista operating system.

    The following items can help you with either:

    How to use system restore to log in Windows Vista when you lose access to an account


    Installing and reinstalling Windows


    Thank you for using the Microsoft Vista support community, let us know if we can be of further assistance!

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error 25014 trying to install Lenovo Thinkvantage Rescue and Recovery! Help, please!

    Hello! Recently, I have restored my laptop with a general copy of Windows 7 pro 64-bit. I had to redo all the drivers and software (of course). I had installed Rescue and Recovery before but never used. I tried to reinstall it today and he throws back each time with the same error message (error code 25014 = 6)! I had installed linux but deleted and installed Windows again. I also have a 21 not used same GB partition (I have no idea how to combine). Any advice on how to work will appreciate it! Thanks for your help in advance!

    RC 25014 = 6 error is error install boot RNR Manager.

    Provide information:

    (1) your machine ship of Lenovo, with Lenovo factory system? If Yes, what operating system has been installed? Vista, windows 7 home, pro etc? This would install with 3 partitions: system_drv, Lenovo recovery, (C).

    (2) you say: I recently restored my laptop with a general copy of Windows 7 pro 64-bit

    Not that this means that you do not have a Lenovo factory restore, but actually installed a commercial version of win7 pro?

    I'll assume win7 pro retail for now.

    (3) you say: I had installed Rescue and Recovery before but never used.

    It was in the past, lets say on a shipped factory system Lenovo?

    (4) you declare: had installed linux but deleted and installed Windows again. I also have a not used 21 same GB partition


    It seems to me, your HARD drive had a top system.  I see Ubuntu mentioned in your other posts. Your HARD drive had several parttions, including the 21 GB partition. Then, you have decided to install a retail version of windows 7 pro.

    During a sale at retail of windows installation, you must pay attention as to where it will install.


    Note steps 7 and 8.

    It seems that you did the windows installation disk HARD existing, with the pre-existing partitions.


    RC = 6

    The simple answer is THAT NRR is already installed.  Did you uninstall RNR before installation?

    The answer is complex:

    During the installation of RBR went to add its boot manager entries, BCD (startup control data), he did NOT like the content of the BCD, IE other entries parked in the BCD, ie, Linux. He expects to have 2 slots used in BCD, windows, and windows RE.


    Reflect this. See if it fits your situation.


    I would erase the HARD disk via a standalone utility, then install win 7 pro retail and all issues should dissipate.

    This erase/delete can be done during the installation of windows.  refer to steps 7 and 8 above.

Maybe you are looking for

  • end of the County trig circumstantial

    Hello, Hello I would like to know if it is possible to trig a circumstantial conversion on a number of endings to a counter and return the meter to its original value in a loop again and make another circumstantial conversion?  the entrance to the me

  • S6000 Wifi problem

    Hi allYou just bought the pad idea S6000-F to the United States. I am now in Greece and noticed that it has a strange problem: if I disable the WiFi button or restart it, then he can't see the network, where it was initially recorded in. The only way

  • Identification of disc XP

    Is it possible for me to know which version of service pack for XP, I have watching the disc or the sleeve that it came?

  • BIOHD1 error code

    I have a HP P6631P with an AMD Athlon IIx4 635 processor operating system running Windows 7 home premium 64-bit, I've had the computer for 11 months, everything was great until yesterday. I pushed the power button and Windows tried to start but has f

  • Calendar appointments new blackBerry Smartphones Synching

    I have install the desktop software to have 2-way synchronization between Outlook and the calendar. If I add an entry in Outlook, it appears on the device, and if I edit an existing entry on the device, the change appears in Outlook.  These calendar