Unable to run Solidworks on Satellite C660-226
Hello
I have install Solidworks 2011 on my Satellite C660-226, the installation seems normal, but I can't launch the software. The first windows opens and then nothing!
Similar problem with CatalystEX, normal installation (?) but the judgment of software with the message of the error. "' Memory may be defective.
I use Windows 7 pro.
Help!
Hello
I think this software 3D needs little graphics memory.
Graphics INTEL HM55 should be allowed for such purposes and the 3D graphics accelerator is supported too.
I think you should update the graphics driver you may be able to use the last being from Intel page.
Tags: Toshiba
Similar Questions
-
Re: Unable to activate WLAN on Satellite C660
Hello
My laptop model is "Satellite C660 psc0se" and I installed a * "windows 8 Cp" * "
Everything is good, but the Wi - Fi is 'off' and when I try to run through the active buttons does not work? What is necessary to work, what is the driver to install it, button knowing that all the buttons and the functions of the keys work except hot Wi - Fi
When I click on the button "fn + f8:" nothing happens and the Wi - Fi connection does not work
Please what is the solution?I guess you know how it works with Win7 that you got with your laptop. It will work on the same path with Win8 but problem is that Win8 isn't on t he market and Toshiba didn't start Win8 official support.
For now, you can try to use Win7 stuff, especially added Toshiba package. If this does not work I can just say: no luck!
There is no alternative at the moment.I just hope that you created the recovery DVDs before Win8 installed.
-
Graphics Intel (HD) issues when you try to use "Stellarium" on Satellite C660
Stellarium (a free application for astronomy) works without any problem on multiple computers to my astronomy club, but impossible to use on my Toshiba Satellite C660-226. No problem installing but nothing adds when I run the program.
I run it in compatibility mode (windows XP Sp2) and Intel HD graphics driver is at the 8.15.10.2189 level, as recommended by the Toshiba support center.
If I install a lower level of this driver (standard VGA graphics card to 6.1.7600.16385 level), Stellarium is working but very slowly and some functions (like zoom) are in listening.
Stellarium support Center recommends to install a more recent level of the graphics driver intel HD, but I can't find a level more recent collaboration with P6100 processor on the Intel download site.
Can you help me?Concerning
> Stellarium 0.10.6 is re-installed and now works without error. So far I don't have more recent level...
Thanks for the comments. ;) -
Satellite C660-108 - fan keeps running
I just bought a Satellite C660-108 and pleasure keeps running all the time. Is this normal?
Hi Judith_2,
If your laptop computer is in idle mode, it isn't normal that the fan still works. Normally it should start and stop as on other models.
But if you run some background applications such as Internet browser, Antivirus, etc., it may be normal because the CPU causes a lot of heat and it must be cooled to protect it from damage.Anyway, you can try to change the cooling method in Windows power management. You can choose between a maximum Performance and battery optimized. If you want to reduce, change the value of the latter.
I confirm there is really a difference between the methods of cooling and optimized battery is much quieter. -
Lost icon volume - Satellite C660 running Windows 7
I was wondering if someone could help me with a little annoying problem...
I have a Toshiba Satellite C660 running Windows 7, since working I could use the function button to turn the sound off, I lost the icon for the volume control on the taskbar... it's one of the things that I use a lot, so I want to recover!
I checked for other people with the same problem and there is a little, but most seem to be able to remedy this by going into the properties of the taskbar and by turning the volume on. The drop-down list is gray for me and will not work :( I can't restore the default behaviors and on the notification icons page it says she is silent, but "Show icon and notifications" is selected.
I hope someone can help!
Thanks for reading :)Hello
The sound volume icon belongs to its driver.
Recommend reinstalling the audio driver to address this issue. -
Satellite C660 - 1 7 - cannot run the BIOS update
Hello
I use my Satellite C660 - 1 7 for a year now, and recently I have a Wi - Fi connection problem with my laptop. I can find the network in my laptop, but it loses the connection permanently. It's a little boring.
Then I tried to update the BIOS update, but each time, he showed "there is an error occurred, please check below the elements." BIOS version more than 200. battery capacity more than 10%. AC is fixed. "Well, I checked, and it is" TOSHIBA 1.40, 2011/1/21 '. "
Can someone help me please?
Thank you
>... but it loses the connection permanently. It's a little boring.
Do you have this problem with power supply battery only or is the problem when the laptop is connected to the power supply running too? -
Satellite C660 - 2L 9 - unable to start Google Sketchup
Hello
First of all, I would like to excuse my English, I'm French.
I bought a Satellite C660 - 2L 9 and I'm not able to start Google Sketchup.
It always freezes. What could be the problem?
I did all the updates of avialable and he keeps does not.Here is a summary of the configuration.
Can someone help me please? Is it because of the graphics card Intel?
Thank you very much!-------------
Operating system
Windows 7 Home Premium (x 64) (build 7601) Service Pack 1
Default web browser: Mozilla Firefox
Default e-mail client:
WinSAT
Notes General 4 (processor: 6.8, RAM: 5.9, graphics: 4, game graphics: 5.1, disc hard pr)
incipal: 5.9)
Motherboard
SMBios version 2.6
TOSHIBA PWWAA 1.00
BIOS: TOSHIBA 1.90 size 10/01/12: 2048 Kb
Chipset
Northbridge: Intel Havendale/Clarkdale Host Bridge
Southbridge: Intel HM55
Processor
Intel Core i3 380 M Arrandale Socket 989 rPGA (@32 nm) 2533 Mhz (L1I: 2 x 32 KB, L1D: 2 x 32 KB, L2: 2 x)
256 KB, L3: 3072 KB)
Memory
Total physical memory: 4096 MB, Type: DDR3, @MHz, 7.0 - 7-7-20-1 t
DDR3 Samsung M471B5273CH0-CH9 4096 MB, PC3-10700 (667 Mhz)
Graphics card
GPU Intel(r) HD
CD/DVD players
HL-DT-STDVDRAM GT51N SB02 (DVD-RAM Recorder)
Hard drive
TOSHIBA MK6475GSX
PCI/AGP cards
Storage
Intel Corporation: 5 Series/3400 Series Chipset 4 port SATA AHCI Controller:
Network
Realtek Semiconductor Co., Ltd.:RTL8101E / RTL8102E PCI Express Fast Ethernet controller:
Realtek Semiconductor Co., Ltd.:RTL8188CE 802.11b/g/n WiFi adapt:
Display
Integrated graphics controller of Intel Corporation: Core processor:
Multimedia
Intel Corporation: 5 Series/3400 Series Chipset High Definition Audio:
Bridges
Intel Corporation: Core Processor DRAM Controller:
Intel Corporation: 5 Series/3400 Series Chipset PCI Express Root Port 1
Intel Corporation: 5 Series/3400 Series Chipset PCI Express Root Port 2
Intel Corporation: 82801 Mobile PCI Bridge
Intel Corporation Chipset LPC Interface Controller: Mobile 5 series:
Communications
Intel Corporation: 5 Series/3400 Series Chipset HECI Controller:
Bus series
Intel Corporation: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller:
Intel Corporation: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller:
Intel Corporation: 5 Series/3400 Series SMBus Controller Chipset:
Signal processing
Intel Corporation: 5 Series/3400 Series Chipset Thermal Subsystem:
USB device
Composite of Alcor Micro Corp. USB device
Alcor Micro Corp video USB device
Entry USB device
Intel Corp. integrated rate matching Hub (Generic USB hub)
Intel Corp. integrated rate matching Hub (Generic USB hub)
Well-tempered Clavier
Toshiba Flash Cards Support driver
Mouse
Mouse HID
Synaptics PS/2 Port TouchPad
Screen (s)
Plug-and-Play monitor genericHello
I think that you should first check the hardware configuration required for Google SketchUp
http://support.Google.com/SketchUp/bin/answer.py?hl=en&answer=36208Recommended hardware
2 + GHz processor.
+ 2 GB OF RAM.
500 MB of available disk space.
Class 3D graphics card with 512 + MB of memory or more. Please make sure that the video card driver supports OpenGL version 1.5 or higher and up to date.It could be possible that your display driver (graphics card, driver) does not contain the OpenGL and, possibly, the driver is not updated
The driver must support OpenGL 1.5 or higher, otherwise, you will not be able to run the SketchUp.
The unit seems to bear the graphic chip Intel HD (HM55) so you should be able to get the latest driver Intel Intel page.
-
Satellite C660-11K - keeps freezing and unable to access the windows
Recently purchased by Satellite C660 11 K and load a game on it, after a few hours it froze (ctrl alt del wouldn't work) I stopped and he started up and I got a message saying some software or hardware was the stoppage of work Windows.
I restored it to factory with the recovery disk. However, I have not loaded all the games or other software since then, but it keeps freezing, and I had to use the drive recovery 3 times!
I don't know what else to try!What happen exactly when you use own OS preinstalled?
What do you do when your computer crashes? -
Re: Satellite C660 - 1 CL-wireless button do not work running 8.1 Win
Hello
my wireless button does not work. I have windows installed 8.1,
I have vap and installed flash cards and still does not.Any suggestion?
As much as I know the Satellite C660 can't win 8.1
This means that the drivers and Toshiba tools are not released to win 8.1.
I think you can use Win 8.1 but be aware that there is no guarantee that you can use all the features of the special specifications.> I have vap and installed flash cards and still does not.
I doubt that this is correct since VAP don t exist to win 8.1
Toshiba system driver is the successor of the VAP in case you use Win 8.1However, try to install the driver of Toshiba and Toshiba function Key Utility system to win 8.1
You can download this software that has been released for other series like Sat C870 for example. -
Re: Satellite C660 - 1 CL 8.1 running Win brightness buttons reversed
Hello
Installed Windows 8.1 pro without having to install the display driver and my brightness buttons work properly.
I installed display driver and buttons brightness reversed upside down.I don't know why - what is going on, but now microsoft has released new driver for my video card and it works fine.
Any suggestion for that cuz im losing lots of light?
PS: Who is happing also with Windows 7 ultimate
I wrote in another thread: as much as I know Satellite C660 is not compatible Win 8.1
This means that the drivers and Toshiba tools are not released to win 8.1.I have other thread wrote you that you have installed VAP.
This is false because VAP don t exist to win 8.1
Toshiba system driver is the successor of the VAP in case you use Win 8.1I think that you question appears because you just used and installed the incompatible software.
-
Satellite C660-1F1-Slow After recovering from DVD and fans constantly running
Hello
I have a Toshiba Satellite C660-1F1 has an i3 processor and I recovered from the recovery disks. A few days later, everything is very slow and the Fans are always at full speed, even at idle and there is no dust when I opened it and I replaced the thermal paste.
All of the Suggestions.
Thank you
Hello
Try to optimize the OS version. Check the startup options and disable all applications that you don't need.
Make sure that all unnecessary applications do not start with the OS. Remove the system from all things, that you don't need.
Play a little with it. -
Satellite C660 is unable to start for the first time
I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K
For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).
Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.
The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.
If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.
He has not indicated in the error logs files
I did a full reinstall of HARD drive recovery system.
I did a full system reinstall from recovery DVDs.
I did a full system reinstall from DVD disk a hard new recovery.
I replaced the ramI tried to update the bios, but get an error
BIOS version more than 200
Battery capacity over 10%
AC is attachedHello
The description of your problem is, for me, quite confusing, and I do not understand your problem.
Can your notebook load and start the preinstalled operating system or not?Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.
-
Satellite C660-22V - dedicated memory graphic question
Hello
I would like to know if it is provided on the model of Satellite C660-22V power added module memory ram wifi blutooth and more particularly to a graphic chipset dedicated.
I ask this question because I am unable to run to download my 'work' was known 3D Lightwave 9.6 of NewTek ('_') and fusion 6.1 of eyeon software.
evryones be dongled.It seems that these two programs is the dedicated requires memory.
Thanks for the help...To be honest, your post is a little confusing.
The laptop seems to support the Intel HM55 HD graphics chip and a part of the main memory would be shared by the graphics chip too.
This info is helpful? -
Satellite C660 - problem with the IKEA 3D viewer
Hi guys, I'm having a problem using Ikea kitchen on my wife Satellite C660-26Z Scheduler using Windows 7 64 bit. Its done online on the website of ikea. An add-on is used called 20-20 3d viewer for ikea. I tried Chrome, Firefox, and IE9.
Chrome add on is unable to load which gives an error message "cannot load viewer. In Firefox, nothing happens and IE9 crashes constantly. I searched all kinds of forums and found nothing that helps.
I have a desktop with XP and it works without problem. My daughter has a Toshiba laptop not running Windows 7 and once again no problem.
I compared the settings as far as my limited knowledge will allow between two laptops and can see no difference between them.
I would be very grateful if anyone has any ideas because my wife made my head!
Thanks in advance.
Llewitha
A few minutes ago I tested on my Win7 laptop. Opera is not supported. Chrome has trouble with extensions, applications, and user scripts but on IE9, it works perfectly.
Try to reinstall IE.
-
Download problem with Windows Home basic on Satellite C660
Hello
I'm on a Toshiba Satellite C660 whenever I have download anything on the internet, when I run on the laptop, it gives me an error, recently I downloaded antivirus on by running, I get the error "Windows cannot find"C:\Users\brian\Desktop\avg_isct_stb_all_2011_1382 _free.exe". "Make sure that yo typed the name correctly and then try again.
I still have this error.Kindly help
Rgds
odubiyi
Try to remove this antivirus system software, reboot the laptop and check if this error message appears again.
Maybe you are looking for
-
Cartridge printer error message HP Office Jet 3600 series
Original title - HP printer Office Jet 3600 series I had a paper jam. I cleared the jam and now I am getting a cartridge error message and I keep out cartridges and put back them, but the error message still cant clear. How can I clear this error and
-
Windows 7 recovery disc creation
Does anyone know how much the recovery disc are? And is there a website I can download it for free?
-
In Microsoft Digital Image 10 how to handle color?
Original title: Photo How can I leave a part of a photo in color and make the rest of the black & white picture? I use Microsoft Digital Image 10.
-
Favicon of Outlook in constant evolution.
New prospects seem to be unique among Web sites that he cannot decide what favicon to use! Personally a blue square divided into four smaller squares blue with a white cross would do the job. Please stop fiddling and decide once and for all on a UNIQ
-
Problem with TextArea with scrolling
Hi all In my application I use qml custom page (simple text editor) that have only one line with 5 buttons, second row have a textField and the rest of the screen is TextArea, nested/arranged in containers bit. Content of the text box is filled by re