Unable to run strtal

Similar Questions

• I'm unable to running Java; I get a ClassNotFoundException error.

  After updating to the latest version of Java (7.10), I am unable to run Java at all. Upon detection of Java (http://java.com/en/download/testjava.jsp), I get an error message and when I click, it says there is a ClassNotFoundException error. I tried to reinstall Firefox, reinstall this version of Java and some older versions, try Chrome and IE9, and in any case, I met the same problem. On my addons, it appears as usual, and installation works very well. Both:

  • Next-generation Java plug-in for browsers Mozilla 10.10.2
  • Deploy Script NPRuntime plugin Library for Java (TM)

  Are enabled, next to the browser settings on the parameters of control of Java, and I cleared the cache as well. I tried all the relevant patches on http://java.com/en/download/testjava.jsp. I have absolutely no idea what to do. I've tried everything. Anyone of you have any suggestions?

  Hey all, I just wanted to post the solution I came to. I found another thread which solved my problem (https://forums.oracle.com/thread/2397610), in particular the last post. It boils down to this line:

  "I used the tip above to add in the Panel / Java / Java / View / Runtime settings the value - Djava .net .preferIPv4Stack = true for my 2 JRE then saved and restarted my browser and suddenly he worked.*.

  It suddenly worked for me also. Good luck!

• Unable to run code

  I just bought a USB-6501. At this point, I am unable to run a number of examples of code that accompanies the latest NIDAQ902-1 package.

  In particular, I am unable to run in VB code "ContWriteDigChan_PipeSampClk". I'm currently running;

  Microsoft Visual Studio 2008
  9.0.21022.8 RTM version
  Microsoft .NET Framework
  Version 3.5

  Installed Edition: professional

  Microsoft Visual Basic 2008 91605-031-5000002-60668

  Loading the code it works "Upgrade Wizard" which is perhaps the root of the problem. It seems to be upgraded to form Net1.0 to Net3.0.

  When I run the code I get an exception error when the code is provided to the line of code;

  myTask.Timing.ConfigurePipelinedSampleClock ("", CType(samplesClockRateNumericUpDown.Value, Double), SampleClockActiveEdge.Rising, _ ")
  SampleQuantityMode.ContinuousSamples, CType (samplesPerBufferNumericUpDown.Value, Integer))

  where myTask => Assembly NationalInstruments.DAQmx

  I get the exception error is;

  Requested value is not supported for this property value.  Well: NationalInstruments.DAQmx.Timing.SampleTimingType you asked: NationalInstruments.DAQmx.SampleTimingType.PipelinedSampleClock you can select: task NationalInstruments.DAQmx.SampleTimingType.OnDemand name: _unnamedTask<0> Code of State:-200077

  I tried in vain to remedy the situation by following the instructions above. Have you advice on how to solve this problem?

  Not sure where you get the number 4ms. Time to do a writing (~1.4 ms) is how much time it takes to write a little and conforms to these criteria.

• I am unable to run Windows Search. No matter how I open it, it says "Windows Search does not work."

  I am unable to run Windows Search.  No matter how I open it, it says "Windows Search does not work."

  What is Windows Desktop Search 4.0 that you have installed with your updates.

  If it is uninstall it from Add / Remove programs.

  The update is KB940157

  If it does not show then show updates is on top, use the method below.

  Click Start , type cmd.
  Now in the result of the research with right-click on cmd.exe and select run as administrator if you are not the administrator.
  Type regsvr32 /u "%programfiles%\Windows Desktop Search" and press enter

  You search old back, see if it works.

  The next time you do the Search 4.0 updates appears again.

  You can try it again if you wish.

• Unable to run the system restore, or any audio file...

  I am unable to run the system in normal mode or safe restore.  When I try to run rstrui.exe a pop up box appears and wants to know what program I want to run this file.  Also when I go to my control panel I can't open anything even not my add or remove channels I get an error msg saying c:\windows\system32\rundll32.exe - application not found - even when im in safe mode appears the same box... help would be appreciated... :-)

  It sounds like you lost the file association for .exe files.
  Visit the following site and follow the instructions to restore your .exe file associations.  Be sure to read the note at the top that applies specifically to the .exe file associations:

  <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Can't find my CD-Rom Windows XP Professional, so I am unable to run a SFC scan to correct the bad image

  Can't find my CD-Rom Windows XP Professional, so I am unable to run a SFC scan to correct the bad image. Help, please! the files are corrupted and I can't fix. Is there a website link, I can go to, to download what I need in order to access cmd sfc/scannow? Thank you very much

  Hi ferfeferferfer,

  You can see the following article for more information on the software.

  How to replace hardware or lost, broken, or missing Microsoft software

• Windows - (various) corrupted file errors. Unable to run chkdsk. Windows XP Home Edition

  Hello

  I hope someone can help me with these error messages; which seem to vary what I do on my computer.  First error message is Windows - file corrupted the file or the directory c:\Program files Symantec Shared Shared\EENGINE\EPERSIST common. DAT is damaged and unreadable. Please run the chkdsk utility. The second error Google Update.exe - corrupted file as the c:WINDOWS\Temp\GUR2.tmp file or directory is corrupted and unreadable. Please run the chkdsk utility.  Unable to run chkdsk by using my computer or command prompt.  System message - cannot open volume for direct access or CHKDSK cannot continue in read-only mode.  Running fsutil dirty query c: Volume-c: is dirty message.  I also have experience from time to time a process loop at startup where the computer keeps turning off and then restarting.  Thank you

  Hello

  ·        Since when are you facing this problem?

  Method 1:

  You can run the check disk by booting in safe mode and check if that helps. To start in safe mode follow the link given below.

  http://support.Microsoft.com/kb/315222

  Once you start mode without fail, try and run the disk check and check errors.

  Method 2:

  If you are not able to run the check disk in safe mode, you will need to boot into the recovery console, and then run check say. To do this, you need the Windows XP installation disc. The enforcement procedure checks the disk in the recovery console.

  (a) Insert the Windows XP CD-ROM into the CD-ROM drive and restart the computer.
  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  (b) when the "Welcome to Setup" screen appears, press R to start the Console history.
  Note: If you have a dual-boot or multiboot, select the installation that you want to access from Console history.

  (c) when you are prompted to do so, type theAdministrator password. If the administrator password is blank, just C:.

  (d) to historic Console command prompt, type the following then C::

  Chkdsk /r

  (e) allow to run INTACT until the completion

  (f) report any error

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP sp3, lost some critical DLLs. Unable to run utilities such as msinfo32.

  I have Windows XP sp3. All of my non-system software working, IP broadband connection works as well. My problem is that I lost some critical DLLs. I've known this for about a year or two. I can't run MSINFO32 or other basic system utilities. Now I'm worried because I can't get MS Firewall online after removing the CA security suite and go MS Security Essentials. I can't use scannow, the System File Checker. It will not work. Please give me some suggestions on how to rebuild the system DLL.

  pawneejeff,
  Thanks for posting on the Microsoft answers Forum.  When you try to run SFC this error message you get?  Also, when you start the command prompt you you sure to right click on the icon and run as administrator.   You have access to your XP CD?  If Yes, you can boot from the disk and go in the recovery and then console run SFC/scannow from there.
  If you are unable to run SFC, then you may need to do a repair of XP installation.  Here are the links that cover SFC and installation options.

  http://support.Microsoft.com/kb/310747
  http://support.Microsoft.com/kb/315341 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to run windows update error code A 8024, 000

  Original title: 8024A 000 error

  I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

  Hi all.

  solution:

  Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

  of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

  This works.

  The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

  This driver 11 version solves the problem with windows Update error A 8024, 000.

  (have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

• for Windows 7 bootable USB key. He says that we are unable to run bootsect

  When I do my USB bootable for Windows 7. He says that we are unable to run bootsect to make the USB drive bootable.

  what I would do.

  Former title: usb install

  This happens because you try to create a x 64 based installation drive of Windows from a PC running x 86 based Windows. x 86 Windows failed to install the correct version of the bootsect for the version of Windows that you are trying to install on USB drive. To address the issue, restart the process from a computer running x 64 Windows.

  See you soon!

• XP does not start, unable to run the command line for the clean boot

  Hello

  For the last two weeks, I've been unable to boot XP, caused by a virus, I think. I can get into safe mode, but stopped to run antivirus software because I said that I don't have the appropriate privileges. There is no system restore points available, and I think that my computer is too old for me to ask the manufacturer (HP) for an OEM drive.

  Now that I found this forum, I decided to try the suggestion of the thread stickied for a clean boot, but I can't even click on RUN and load the command prompt. I click, but nothing happens. Many programs in safe mode did the same thing for me.

  Is there another way to enter the guest so I can try to get a clean boot? Is there another way to access msconfig? I read here that I can click on F10 to try HP and XP 'factory re - install', but the HP splash screen is no longer, perhaps due to a new card mother MSI, I put a few months ago. Any help?

  If all else fails, I buy a Windows 7 Upgrade disk and which will still work? Or would I need to buy the complete installation of W7 to "clean up" my system?

  Thank you.

  Jacob S.,.
  Thanks for posting with us.  Have you tried to run MSConfig from safe mode?  If the immediate window does not work, you can right click on your taskbar and start the Task Manager.  From there, you can select file > new task > and then type msconfig in the window.

  With respect to obtaining OEM disc, you may be able to buy them from HP, but since you have replaced the motherboard and then the OEM disc probably does not work.  You should check with HP on this one.

  If you buy the upgrade to Windows 7 you can do a clean install, but it should be started from Windows.  You insert the DVD in the drive so that the desktop, and then select the custom Setup to perform a clean installation.  It will validate your XP before you start the installation.

  Now if you think that your PC has a virus (which it sounds like it might) then you can try using a free online virus scan.  You should be able to run one of them without blocking.  Also, make sure that you log on with an administrator account.  Here is a link to a scan online, that you can try, or you can search bing for others that are out there.
  http://OneCare.live.com/site/en-us/default.htm Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to run .exe files without using runas:administrator

  Original title: Windows Script Profiler?

  I recently had a virus on my computer, and it's file, he decided to corrupt. So, naturally, the antivirus got rid of him. Apparently, it was a pretty important, because now shortcuts to executables do work if I run as administrator (otherwise, I must point out the path for the time of EACH shortcut manually) and pitchers for the games that open several executables for the open game (EX: LOTRO) do any work.

  Is there a way I could get this file? (yes I tried the system restore: it did not work)

  Hello Braxton-235,

  Thanks for the return of the response.  Below I have included a link with users having the same problem.  They had a virus and once removed cannot be run/launch of .exe files.

  Microsoft Answers: Unable to launch a .exe file or shortcut unless I have run as administrator

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-launch-an-exe-file-or-shortcut-unless-i/6f0d8594-2f7b-41b1-BC90-51648dba1b78

  Please let us know status.

• Unable to run my project on Simulator

  Hi all

  I have this problem when I try to start my project in the Simulator:

  Unable to connect.  Make sure that the Wi - Fi or USB cable is connected, the IP address is correct, and mode of development.

  Simulator is running, in the developer settings simulator mod is on, the controller is correctly connected to the Simulator and my IDE correctly find the target... .but in the ide, I see that the target is not connected and when I try to run the project on the previous message...

  

  Thanks for all the help.

  GoTo windows-> preferences-> General-> network connections

  and select the direct method as the provider Active.

  This solve my problem! thnks

• I am unable to run applications downloaded to the windows store.

  After having updated my laptop having windows 8 apps are displayed on the splash screen, but their logo on the side is not available. and they do not work. Also, I am unable to download any app from the store windows.

  Hi friend

  Welcome to the Microsoft community,

  I think that's the problem in the store, that your applications crash! But you should for any future update for this problem.

  You must follow the steps: -.

  Method 1:

  
  What to do if you have problems with a soft: http://windows.microsoft.com/en-US/windows-8/what-troubleshoot-problems-app

  I suggest you run the troubleshooter app and check if it helps.

  Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you to change the settings for resolution of 1024 X 768 and check if it helps.

  a. click on the title of office from the beginning.
  b. right-click on the desktop
  c. Select the screen resolution.

  Try to update the latest driver to display on the manufacturing site and check if it helps.

  (a) press the Windows key + R, type devmgmt.msc to open Device Manager.

  (b) develop display drivers, click the driver.

  (c) click on properties, click the driver tab.

  (d) click on Update Driver.

  (e) restart the system and check if it helps.

  Method 3:

  The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. For example, some Windows functions may not work, or Windows may crash.

  one) starts at the desktop view.

  (b) open the command prompt, right-click in the left corner when the departure windowappear and select command prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

   

  
  

  We would be more than happy to help you if the steps above did not solve the problem.

  Thank you!

• Unable to run email of announcement of Craigslist with Firefox web browser. The link works fine when you use Internet Explorer. Don't know why this problem?

  When I click on send to a Craigslist of announcements of sale, e-mail software does not run. When I used the same craigslist Web page with Internet Explorer, the e-mail program runs without any problem. Not sure why this problem?

  If you change your preference of mail helper in Firefox for 'other use '.... "you are presented with a command prompt to select an application click 'Browse... '. "and browse your computer for the program of choice. Even if you're already shown two e-mail programs, try to re - select the one you want to use via the method go and then try again to open a mailto link.

  If this does not work, open your profile button in folder

       Help > Troubleshooting Information
  

  and the release of Firefox. With Firefox closed, remove the file "mimeTypes.rdf" of your profile folder, and then restart Firefox and Firefox will re - build the helper, file applications and you can try again to send someone from a link.