Unable to start after P2V on Dell T5500

Similar Questions

• Win2008 R2 does not start after P2V

  Hello

  I am facing a problem while doing a P2V of Win2008 R2 and it does not start after P2V with error 'selection 0xc0000225 - initialization failed because a required device is not accessible' on VM (error see attachment). We use 4 standalon converter (also tried with PlateSpin Migrate 9.0.2) to virtualize Windows 2008 R2 SP1 (HP DL580 G7) in VMware ESX 3.5.0 (IBM 3850 M2) environment. Pleae help solve them if anyone faced this issue earliar. Thank you in advance.

  Rajat

  Hello René,.

  In fact it is not, there is a mistake in the release notes.

  You can try at least a target with Converter 5.0 reconfig.

  Kind regards.

  Plamen

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• Unable to start after you run the product recovery disc

  Hello

  My laptop was a dual boot with windows XP SP3 and ubuntu

  1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

  2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

  3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

  4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

  Guys, your help will be much appreciated

  Hello

  > I run and it filled, but now am unable to start my laptop

  Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

• Unable to start after the installation of the printer driver

  I have a dell with vista 32 pc I recently replaced a broken with an identical printer printer, but what either the reason society printer when sending to the printer installation instructions sent replacement and this includes reinstalling the driver for the printer, so I followed the directions to reinstall the driver. After all, the n is the desired computer restart, so it was the case, but OS could not open sent me to a silicone black white screen saying there was a problem with windows and does not, and I could launch a system repair or start windows normally. well repair luanching systems but it won't do anything at all and when you try to start normally it's just a black screen with a white bow doubled by a green line through it and now he used to statrt al all? can u help please

  original title: Please help__

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon. Mick Murphy - Microsoft partner

• Windows2003 VM does not start after P2V

  Hi all

  We have done a P2V process for one our our servers.  The server we have converted had a mirror of software on the system (drive C) Windows2003 volume.  We did not affect the mirror (I'm not sure it's important or not?) before making the P2V process.  The P2V process is perfect for all volumes (this has had several volumes of data, and the system volume).  But after cranking up the virtual machine, it does is stay in the start screen "Windows2003 Server."  We can boot mode safe with no problems. I don't see the IRQ conflicts since the information system.  I have dones all kinds start troubleshooting by msconfig/selective startup process. I don't see any related events in Event Viewer that could help me to identify the problem.  We have disabled for each possible windows startup service, we might think.  Even after doing all this troubleshooting, starting the virtual machine in normal mode, it cannot cross the spash screen Windows2003.

  (Question)

  (1) - everyone has successfully done a P2V of Windows Server 2003 conversion which was a mirror of the software on the system volume?  If so, what advise you?

  • Any ot her Advisor or articles would be very useful. We're scratching our heads and don't know what should be our next step.

  Thanks in advance,

  Bob

  Hi Bob,

  This question was already asked here. I suggest that you use the search function next time. Please read this post and the response posted by chucarama. Although it applies to hardware RAID NT4, it should also work on Windows 2003.

  HTH

• Unable to start after the installation of updates

  original title: after doing a clean install of Vista Premium he had 105 updates to do, but since their doing that he has not done everything it will be now I can get into safe mode does not start, but that's all

  I did a clean install of Vista basic first then upgraded to Vista Premium there was a 105 updates windows to do did not each other, but now the computer won't in vista I can get into safe mode, but that's all.  How can I fix the problem

  Hello

  Start the computer in a clean boot state.

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Unable to start after installing SP3

  original title: problem installing SP3

  Whenever I have install sp3, that my computer starts in safe mode, I have to run the system restore to get back, can someone help?

  You can't just rename Intelppm, since then it would be "disappeared" but on next boot, XP would always try to load and do not find the file, so I think that you wait for the error.

  I'm not sure that article HP makes sense - perhaps Beach Bum Daavee will weigh on that thought.

  Using the Recovery Console, you need to disable the Service, as shown in method 2 of this article:

  http://support.Microsoft.com/kb/953356

  Then when you restart, the Service will not even try to start.

  If things get worse, you can also run "enable intelppm" the RC.

• Unable to start after the cancellation of the updates

  original title: I keep the computer for an update to vista (1 of 16) and now the computer does not restart. Help.

  I shut down the computer for a vista update (1 of 16) and now the computer does not restart. Help.

  Hi Clemsonincola,
   
  1. do you get an error at startup of the system?
  2 have you tried to start the computer in safe mode?
   
  Try these steps and check the result.
  Step 1: Start the computer in safe mode
  a. see start your computer in safe mode
  Step 2: If you are able to start the computer in safe mode, and then restore the computer to an earlier time
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.
  
  See What is system restore?
  Step 3: If you are not able to start the computer in safe mode, and then run the Startup Repair tool and check the result
  a. put the Windows Vista installation disc in the disc drive, and then start the computer.
  b. press a key when you are prompted.
  c. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  d. click on repair your computer.
  e. click the operating system you want to repair, and then click Next.
  f. in the System Recovery Options dialog box, click Startup Repair
  g. once the Startup Repair tool is completed, click Finish to restart the computer.
  h. remove the DVD and restart the computer to see if the system boots fine.
   
  See Repairs to the system of Windows recovery environment
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start after effects CC 2014 13.2

  So I initially had after effects CC 12.2 and decided to launch for the first time in a few months. When I tried to open it, but I was met with the following messages:

  (Screenshots in order of appearance)

  Gyazo - 1d3677b81d48e995bdd7f2aa80371434.png

  Gyazo - a5a8fe021d54613c0c51056128b76322.png

  Gyazo - 478108c011cac2b57ae1f955196a58ca.png

  Gyazo - 9ac50429073de7c73eb6d4d483f9dda3.png

  Gyazo - 9cbe427389e4a1ef4d2e1c11140531e4.png

  After seeing this error, and restart the application several times, I tried install newest After Effects (CC 2014 13.2%) and execution, but instead, I get the same exact error messages.

  Every other time I tried to open After Effects before today, I have not encountered this problem, but I tried to install Adobe Media Encoder CC and opening this right beforehand, but I could also get to run due to another error that I will probably do a separate post.

  My computer is running on Windows 7 Home Premium Service Pack 1

  3.00 GB RAM

  Pentium Dual Core CPU E5200 @ 2.50 GHZ

  64-bit operating system

  Your system does not meet the minimum requirements to run AE. System requirements | After Effects

• Unable to start after the installation of Security Essentials

  original title: Security essencials

  I installed essencials security and now computer will not work. get the black screen and says bootmgr is missing, I did all the tests and trials

  Jeffrobinson,

  Is that what you are always problems with your computer?

  You can also try to do a system repair

  If you are using Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Unable to start after the updates for windows xp

  I followed the solution proposed by Kevin trying to uninstall the patch KB977165, but the command line did not recognize text chdir $NtUninstallKB977165$ \spuninst

  Please report all follow-up responses to your original thread, PC: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/0db0be3e-fe23-484d-b3b0-2aa721fd35fd/ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to start after the installation of Windows updates

  original title: windows update 10/11/2011.

  When I install the updates above that my pc does not restart, I restore it to before the update and my itunes icon disappears.

  I installed both times and the same thing happened twice, am now a little worried if you want to try again or what to do next.

  Any help would be greatly appreciated, but nothing technical massively please!

  Thank you

  Nigel.

  Hello Nigel,

  I would recommend installing either of these updates at the same time until you see this behavior.

  When this occurred, use system restore to go back to when the last update was installed and can hide the update, which is the origin of the problem.

  Best regards

  Matthew_Ha

• Satellite P15-S420: unable to start Windows XP

  I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

  When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

  What do you think???
  Oh, I have a Satellite P15-S420.

  Hello

  In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
  You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

• Unable to start bootcamp after partitioning El Capitan

  Lonely HI T,

  I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

  Here's the info re: my product:

  Here is some information about: my volumes:

  • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
  • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
  • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
  • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
  • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

  Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

  I already had Tuxera NTFS installed but uninstalled.

  Below you will find the following information:

  • diskutil list
  • Cs diskutil list
  • sudo TPG - vv - r see the/dev/disk0
  • sudo fdisk/dev/disk0

  Thank you for the patience and kindness in advance,

  CESCO

  Last login: Tuesday, February 2, 23:22:10 on ttys000

  Cescos-iMac: ~ list of the Cesco$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

  5: Microsoft data base SOLID 150,0 GB disk0s5

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Macintosh HD 899,2 GB disk1s2

  3: Apple_HFS Recovery HD 650.0 MB disk1s3

  4: Microsoft data base LIQUID 100.0 GB disk1s4

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 500,1 DIS3

  1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ list of cs Cesco$ diskutil

  No logical volume group CoreStorage found

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  683542528 262144

  683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Cescos-iMac: ~ Cesco$

  Re: Unable to start bootcamp after partitioning El Capitan

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  It will show you the first block of the SOLID wall.