Unauthorized network card error in Lenovo W540 with 802.11ac mini Intel PCIe

Similar Questions

• Error x 40 and 1802: unauthorized network card is plugged

  Hello
  I have a 40 X with its original wifi card. After some bios upgrade, this startup error shown:
  1802: unauthorized network card is plugged - power off and remove the miniPCI network card.

  How can I solve this problem? Perhaps without downgrading the BIOS?

  Thank you very much
  Oliver

  I solved the problem bu decommissioning to the newest BIOS that support my CPU, i.e. without downgrading to the original BIOS

• T440p: 1802 unauthorized network card, none can not start the update of the BIOS

  Yesterday, I received my Lenovo Thinkpad T440p.

  I wanted to install Linux immediately, but apparently 14.04 isn't able to boot with the 2.22.

  The solution suggested in various forums was to downgrade the Bios to version 1.14, I did using the Windows

  Installation program provided on the Lenovo's Support page.

  After reboot, I get the infamous error 1802: card plugged unauthorized network, probably because of the whitelist is not not to date.

  I was told by the support hotline to update my BIOS to another version by using the bootable CD images.

  I have burned different versions of them, but none of them would start.

  The error will appear right after the start of the Thinkpad screen. I can't get into the Bios. Press a button (Esc F1, F11, F12), entry etc has no effect either.

  How can I install another version of BIOS? Is there an extra step that I take, in order to update the BIOS through a bootable CD?

  Any help is very appreciated!

  Hi x220forMe

  After discussions with the Lenovo support and have been assured that it would not affect my warranty

  I removed the two network cards and was able to start. It turns out that the problem was the map of the Sierra.

  I don't really count on this map, but I find Lenovos "Whitelist" exasperating and totally stupid.

  I wish I could have my back T420s, every thing was better on this machine

  in any case, thank you for your efforts to help me!

• Network card error

  Hello everyone
  I'm stuck in one of the most common error, I looked at all the forums but unable to find a solution. I'm trying to connect to oracle through sql developer.
  When I run the listner file it gives me
  
  [oracle@localhost ~] $ lsnrctl
  
  LSNRCTL for Linux: Version 11.1.0.6.0 - Production on July 31, 2009 19:28:59
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  Welcome to LSNRCTL, enter 'help' for more information.
  
  LSNRCTL > status
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Linux error: 111: connection refused
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Linux error: 111: connection refused
  -------------------------------------------------------------------------------------
  
  Content of my etc/hosts file is:
  127.0.0.1 localhost.localdomain localhost YOUR_HOSTS
  : 1 localhost6.localdomain6 localhost6
  --------------------------------------------------------------------------------------
  
  When I run sqldeveloper I get error
  Network adapter error please can anyone help
  Thank you. #

  Oracle 11g R1 comes with SQL Developer 1.1. You must use the latest version which is 1.5.5.

  To use the version you downloaded separately, you also need a JDK, then download a recent (1.6_)? Sun JDK and install it. When you run sqldevelor the point to the JDK you have installed.

  You can also find this directory ~/.sqldeveloper is put to date by the two versions then delete it before you start to work with the latest version.

  For sqldeveloper to connect to orcl on localhost, you need a listener (which is where we are).

  1. start the listener.
  Log in as user oracle and run lsnrctl status, then lsnrctl start if the listener is not running.
  Type 'lisnrctl status' again and note the line

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=xxxxxx) (PORT = 1521)))

  2 save your database with the listener.
  In your first post the listener showed "supports any service."
  Connect to the database using "sqlplus / as sysdba.
  type 'show local_listener parameter.
  If this is empty, type
  ALTER system set local_listener ='(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=xxxxxx) (PORT = 1521)))' scope = both;
  modify the registry database;

  At the command line type lsnrctl status OS to see if your database service is presented.

• new computer with 802.11ac - router E2000

  Purchase of a new Dell - choices are 802.11ac or B | G | N | wireless network.

  E2000 is N.  I f I buy computer with AC, it will work with this router?  I'm pretty good, but not a techie.

  It should be backwards compatible. Somewhere in the specifications for the pc card it must be said that

• E530C suddenly displaying 1802: unauthorized network card is plugged

  As the title goes, for no apparent reason my E530C suddenly gives me the 1802 error. I have not changed the map, I have not updated all the drivers, the machine was not turned off during an update or anything out of the ordinary. It was just past one day and the next day, he gave this error.

  I can't get into the bios to disable the card as the error comes first.

  The machine works without the attached map, but it's a motherboard that has worked so far so I can't believe that he is not part of the white list that I've read.

  Please, any help at all would be much appreciated.

  Nox41

  You have the chip Broadcom BCM4313 based on the card is installed. Yet an another FRU of this card is 20200100.

  Certainly, ID above are not in the whitelist.
  There are 3 chip Broadcom based on items in the BIOS E530c wl (v.2.55):
  ven_14E4 & dev_4727 & subsys_060814E4
  ven_14E4 & dev_4359 & subsys_060714E4
  ven_14E4 & dev_4365 & subsys_061117AA

  It seems ven_14E4 & dev_4313 IDs belong generic Broadcom card (not marked), or fabricated chip itself. I did not ever seen the real map with the ID of the error message shows:
  ven_14E4 & dev_4313 & subsys_431314E4.
  ID looks unreal.

  So, I guess that the card id have been modified by a reason any. Probably the firmware caused that action, or even the card may be broken and can not pass its real ID for the laptop of the PCI bus.

• Can I group more than 2 network cards on a single server with Windows 2008?

  I am wanting to know if there is a way to team up to six cards NETWORK with Windows Server 2008.

  Hello

  Given that the problem is related to Windows server 2008, I suggest you post this question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en/winserverPN/threads

• Error of current password with my compaq mini

  Hello

  I have a Compaq mini 110 who crashes at startup and wrote

  Enter the current password now:

  After 3 entries, it stops with the [number of Series edited by Moderator]
  Please help me.

  Thank you.

  Hello

  Enter: e9lof7ufb9 (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP Pavilion DV3t - upgrade of the wireless NETWORK card gets 105 error - please help

  I wanted to update my wireless NETWORK card, but after turning the power on, error 105 - unsupported network device

  I have the original is the broadcom wifi + bluetooth combo card and I intend to use a card Intel with 802.11ac ability and also has bluetooth onboard. Its also 2 x 2 if original antenna snap right in

  I'm on the latest firmware F15

  Is there a way I can install this other NETWORK card?

  Help is appreciated!

  Bericade.

  Chapter 3.

  http://h10032.www1.HP.com/CTG/manual/c01720761.PDF

  You can use these wireless cards.

  Regulations of the FCC sorry.

  REO

• Satellite P20 S203: How can I use the wireless network card?

  Hello
  first - sorry for my English. I have toshiba P20 S203 (I know - old hardware).
  I read a few descriptions on this computer and I know that the model probably have wifi. I see on the left side of my laptop, but don't see it Win Xp Pro Sp2.
  How to turn on and connect to my lan wirreless?

  again sorry for my English...

  Hello

  As mentioned the laptop has no installed wireless network card, but you can improve with one compatible.
  The minPCI card has two cables; Brown and white.
  Usually the white cable be connected to the hand and Brown to the

• Network card problem

  Hello

  I have a MacPro mid 2010, 2x2.66 GHz 6 core, 32 GB memory DDR3, nVidia GeForce GTX 760, disk SSD PCIE.

  It seems that I have the problem with the network card. At first, I noticed that control avid artist (a control unit for the music studios) lost connection randomly.

  After months of trying to figure out why this happened, Avid were certain that there was something wrong with my NIC card on my mac pro. It seems they are right, because I tested and I also noticed that when I am connected to a VPN, the VPN connection fell back randomly.

  I'm not sure if it's a hardware problem or not. I reinstalled it in OS X format from scratch. problem remains.

  Any ideas...?

  Thank you

  Alex

  After you have reinstalled the OS X from scratch we can assume that it is indeed a hardware problem initially. Then there are things to try-

  • Try the other network on the Mac Pro (he has two)
  • Try a different network cable
  • Try a different network Jack

  If not, help above, then it may be the chip rather than the plug or cable, whereby cases that the chip is soldered to the logic board, you will need to seek a different network card. This could be a USB one or a PCIe one. See below for examples.

  http://www.Apple.com/uk/shop/product/MC704ZM/A/Apple-USB-Ethernet-adapter

  http://www.KANEX.com/usb3lan

  http://www.sonnettech.com/product/prestogigpciepro.html

  http://www.sonnettech.com/product/prestogigpcieserver.html

• Pavilion 11-k013cl x 360: need a driver for my network card

  Hi all

  I can't see Optional wireless after update to my laptop.

  My network card is a 10/100BASE-T Ethernet LAN (RJ-45 connector).

  According to me, Miss me the driver that I'm not under network adapters in the Device Manager.

  I am running Windows Pro 8.1.

  The laptop is a Pavillion 11-k013cl x 360.

  Wireless connectivity should work with 802.11ac WLAN.

  Internet is currently running when it is connected to an Ethernet cable.

  Any help?

  Hello:

  Driver Intel banhien displayed is not for the wireless card that your laptop is, according to what is listed in the System tab of conditions on the driver page.

  The pilot W8.1 you need for the Intel 3160 are:

  This package contains drivers for the Intel Wireless LAN card of supported models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76890.exe

  The other two devices shows your screenshot need these drivers...

  PCI device... Download, unzip and run the application of configuration of the first item listed in the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  The unknown device is probably in need of this driver...

  This package provides the HP 3D Driveguard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. Software HP 3D Driveguard protects the hard drive by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

• Some Office Wireless NETWORK card

  I thought my wireless desktop. You have to have a certain type of certain desktop computer wireless NETWORK card or are all compatible with each other?

  Depends, are not specific others that ensure your pc has the type of connection (PCI slot or usb) which is required

  You can buy a PCI Wireless card, or you can buy a usb wireless dongle, assuming that you have a modem or router, you can buy the same wireless models.

  I'm not entirely sure if you have a desktop computer and no other PC it has wireless would bring anything to the equation.

  You have a specific need / use in mind?

• can I configure an IPv4 address and IPV6 on the same NETWORK card

  I test double stack IPv4 and IPv6 on a firewall.  Can I configure IPv4 and IPv6 addresses on the same NETWORK card using a laptop installed with Windows 7, in order to test the firewall for both IPv4 and IPv6 protocols access? And if so, how to configure the NETWORK card?

  Thank you

  Jack P.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

• Looking for specific network cards

  I'm looking to find adapters to specific network within our infrastructure.  I have been using this command.

  $vms = get - vm; foreach ($vm in $vms) {write-host $vm. {Name "-" $vm.networkadapters [0] .Guy}

  I want to filter to find the flexible network adapter.  After all of the network adapters were found, we seek to find an automated way to change all the flexible drivers.  If anyone can help me to filter the flexible drivers, it would be greatly appreciated.

  Thank you

  The following PowerCLI script lists all the virtual machines with Flexible type network adapters:

  Get-VM | Get-NetworkAdapter | Where-Object {
    $_.Type -eq "Flexible"} | `
    Select @{N="VM";E={$_.Parent}},@{N="Network Adapter";E={$_.Name}},Type
  

  If you want to change the type of network adapter for all Flexible Vmxnet3 network cards you can do that with the following script:

  Get-VM | Get-NetworkAdapter | Where-Object {
    $_.Type -eq "Flexible"} | `
    Set-NetworkAdapter -Type Vmxnet3 -Confirm:$false
  

  Best regards, Robert

  Post edited by: RvdNieuwendijk added the second script